Re: 2.4.17 usbnet usb.c: USB device not accepting new address

[Johannes Erdfelt]

It's not responding to the SETUP packet. I'd check the cable, or maybe
the connector on the motherboard.

Does it enumerate in Windows?

JE

On Mon, Jan 07, 2002, Jörn Nettingsmeier <[e-mail]> wrote:
> btw, here's the error message i get from uhci.o
> (as opposed to usb-uhci.o, which i had pasted into my earlier post)
> 
> Jan  7 22:05:18 kleineronkel kernel: usb.c: kusbd: /sbin/hotplug add
> 6
> Jan  7 22:05:18 kleineronkel kernel: usb.c: kusbd policy returned
> 0xfffffffe
> Jan  7 22:05:18 kleineronkel kernel: hub.c: port 2 connection change
> Jan  7 22:05:18 kleineronkel kernel: hub.c: port 2, portstatus 101,
> change 1, 12 Mb/s
> Jan  7 22:05:18 kleineronkel kernel: hub.c: port 2, portstatus 103,
> change 0, 12 Mb/s
> Jan  7 22:05:18 kleineronkel kernel: hub.c: USB new device connect
> on bus1/2, assigned device number 7
> Jan  7 22:05:18 kleineronkel kernel: uhci.c: uhci_result_control()
> failed with status 440000
> Jan  7 22:05:18 kleineronkel kernel: [d7d000c0] link (17d00062)
> element (1193e1e0)
> Jan  7 22:05:18 kleineronkel kernel:   0: [d193e1e0] link (1193e210)
> e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0,
> PID=2d(SETUP) (buf=1f1fd2a0)
> Jan  7 22:05:18 kleineronkel kernel:   1: [d193e210] link (00000001)
> e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN)
> (buf=00000000)
> Jan  7 22:05:18 kleineronkel kernel:
> Jan  7 22:05:18 kleineronkel kernel: usb.c: USB device not accepting
> new address=7 (error=-110)
> Jan  7 22:05:18 kleineronkel kernel: hub.c: port 2, portstatus 103,
> change 0, 12 Mb/s
> Jan  7 22:05:18 kleineronkel kernel: hub.c: USB new device connect
> on bus1/2, assigned device number 8
> Jan  7 22:05:18 kleineronkel kernel: uhci.c: uhci_result_control()
> failed with status 440000
> Jan  7 22:05:18 kleineronkel kernel: [d7d000c0] link (17d00062)
> element (1193e1e0)
> Jan  7 22:05:18 kleineronkel kernel:   0: [d193e1e0] link (1193e210)
> e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0,
> PID=2d(SETUP) (buf=1f1fd2a0)
> Jan  7 22:05:18 kleineronkel kernel:   1: [d193e210] link (00000001)
> e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN)
> (buf=00000000)
> Jan  7 22:05:18 kleineronkel kernel:
> Jan  7 22:05:18 kleineronkel kernel: usb.c: USB device not accepting
> new address=8 (error=-110)
> 
> -- 
> Jörn Nettingsmeier     
> home://Kurfürstenstr.49.45138.Essen.Germany      
> phone://+49.201.491621
> http://spunk.dnsalias.org
> http://www.linuxdj.com/audio/lad/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/