> On Sat, 5 Jan 2002, Mikael Pettersson wrote:
>
> > When running 2.5.2-pre7 on my old for-testing-only 486(*),
> > file-system accesses seem to come in distinct bursts preceded
> > by lengthy pauses. Overall performance is down quite significantly
> > compared to 2.4.18pre1 and 2.2.20pre2. To measure it I ran two
> > simple tests:
> >
> > Test 1: time to boot the kernel, from hitting enter at the LILO
> > prompt to getting a login prompt
> > Test 2: time to "rm -rf" a clean linux-2.4.17 source tree, using
> > the newly booted kernel (no other access to the tree before that,
> > so it wasn't cached in any way, and the machine was otherwise idle)
> >
> > Test 1 Test 2
> > 2.2.21pre2: 71 sec 75 sec
> > 2.4.18pre1: 64 sec 72 sec
> > 2.5.2-pre7: 97 sec 251 sec
> >
> > I haven't noticed any slowdowns on my other boxes, so I didn't
> > do any measurements on them. On the 486 it's very very obvious.
>
> This is exactly, what I see with my old 486 box. It started with
> 2.5.2-pre3, which contained two major items:
>
> - bio changes from Jens
> - scheduler changes from Davide
>
> Surprisingly, backing out the bio changes didn't help. Backing out the
> scheduler changes from Davide did!!
>
> Maybe the problem lies somewhere in between, because it is often I/O
> related, e.g. first call of ldconfig is horrible slow, as is e2fsck.
>
> But I also see system hiccups from time to time, where console switching
> does not work for 1 second on an idle box.
>
>
> > (*) 100MHz 486DX4, 28MB ram, no L2 cache, two old and slow IDE disks,
> > small custom no-nonsense RedHat 7.2, kernels compiled with gcc 2.95.3.
>
> Is this ISA (maybe it has something to do with ISA bouncing)? Mine is:
>
> 486 DX/2 ISA, Adaptec 1542, two slow scsi disks and a self-made
> slackware-based system.
>
> Can you also backout the scheduler changes to verify this? I have a
> backout patch for 2.5.2-pre6, if you don't want to do this for yourself.
There should be some part of the kernel that assume a certain scheduler
behavior. There was a guy that reported a bad hdparm performance and i
tried it. By running hdparm -t my system has a context switch of 20-30
and an irq load of about 100-110.
The scheduler itself, even if you code it in visual basic, cannot make
this with such loads.
Did you try to profile the kernel ?
- Davide
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/