This post gave me the impetus I needed to get my act together and post
a patch I've had lying around for awhile, so here it is (against
2.4.17). It still needs a lot of work, but it allows my 320 to limp
along at least. I've got a project page setup for it at
http://linux-visws.sourceforge.net if anyone's interested (and I hope
some still are as there's lots of work to do). Any tips on ways to
clean up the patch would be welcome (and should probably be discussed
on linux-visws-devel@lists.sourceforge.net).
Thanks,
Jesse
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/config.in linux-2.4.17-visws/arch/i386/config.in
--- linux-2.4.17/arch/i386/config.in Fri Dec 21 09:41:53 2001
+++ linux-2.4.17-visws/arch/i386/config.in Wed Jan 2 17:05:27 2002
@@ -201,11 +201,12 @@
# Visual Workstation support is utterly broken.
# If you want to see it working mail an VW540 to hch@infradead.org 8)
-#bool 'SGI Visual Workstation support' CONFIG_VISWS
+bool 'SGI Visual Workstation support' CONFIG_VISWS
if [ "$CONFIG_VISWS" = "y" ]; then
define_bool CONFIG_X86_VISWS_APIC y
define_bool CONFIG_X86_LOCAL_APIC y
define_bool CONFIG_PCI y
+ define_bool CONFIG_VISWS_HACKS y
else
if [ "$CONFIG_SMP" = "y" ]; then
define_bool CONFIG_X86_IO_APIC y
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/head.S linux-2.4.17-visws/arch/i386/kernel/head.S
--- linux-2.4.17/arch/i386/kernel/head.S Wed Jun 20 11:00:53 2001
+++ linux-2.4.17-visws/arch/i386/kernel/head.S Wed Jan 2 16:45:19 2002
@@ -42,6 +42,25 @@
* On entry, %esi points to the real-mode code as a 32-bit pointer.
*/
startup_32:
+#ifdef CONFIG_VISWS_HACKS
+ENTRY(stext)
+ENTRY(_stext)
+/*
+ * Initialize page tables
+ */
+ movl $pg0-__PAGE_OFFSET,%edi /* initialize page tables */
+ movl $007,%eax /* "007" doesn't mean with right to kill, but
+ PRESENT+RW+USER */
+2: stosl
+ add $0x1000,%eax
+ cmp $empty_zero_page-__PAGE_OFFSET,%edi
+ jne 2b
+ movl $0x101000,%eax
+ movl %eax,%cr3
+ lgdt gdt_descr
+ lidt idt_descr
+#endif
+
/*
* Set segments to known values
*/
@@ -411,8 +430,10 @@
/*
* Real beginning of normal "text" segment
*/
+#ifndef CONFIG_VISWS_HACKS
ENTRY(stext)
ENTRY(_stext)
+#endif
/*
* This starts the data section. Note that the above is all
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/i8259.c linux-2.4.17-visws/arch/i386/kernel/i8259.c
--- linux-2.4.17/arch/i386/kernel/i8259.c Mon Sep 17 23:03:09 2001
+++ linux-2.4.17-visws/arch/i386/kernel/i8259.c Wed Jan 2 16:45:19 2002
@@ -52,7 +52,7 @@
*/
BUILD_16_IRQS(0x0)
-#ifdef CONFIG_X86_IO_APIC
+#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_X86_VISWS_APIC)
/*
* The IO-APIC gives us many more interrupt sources. Most of these
* are unused but an SMP system is supposed to have enough memory ...
@@ -91,7 +91,7 @@
* overflow. Linux uses the local APIC timer interrupt to get
* a much simpler SMP time architecture:
*/
-#ifdef CONFIG_X86_LOCAL_APIC
+#if defined(CONFIG_X86_LOCAL_APIC) || defined(CONFIG_X86_VISWS_APIC)
BUILD_SMP_TIMER_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
BUILD_SMP_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
BUILD_SMP_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
@@ -109,7 +109,7 @@
void (*interrupt[NR_IRQS])(void) = {
IRQLIST_16(0x0),
-#ifdef CONFIG_X86_IO_APIC
+#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_X86_VISWS_APIC)
IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3),
IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
@@ -407,7 +407,7 @@
* IRQ2 is cascade interrupt to second interrupt controller
*/
-#ifndef CONFIG_VISWS
+#ifndef CONFIG_X86_VISWS_APIC
static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
#endif
@@ -444,11 +444,6 @@
{
int i;
-#ifndef CONFIG_X86_VISWS_APIC
- init_ISA_irqs();
-#else
- init_VISWS_APIC_irqs();
-#endif
/*
* Cover the whole vector space, no vector can escape
* us. (some of these will be overridden and become
@@ -460,6 +455,12 @@
set_intr_gate(vector, interrupt[i]);
}
+#ifndef CONFIG_X86_VISWS_APIC
+ init_ISA_irqs();
+#else
+ init_VISWS_APIC_irqs();
+#endif
+
#ifdef CONFIG_SMP
/*
* IRQ0 must be given a fixed assignment and initialized,
@@ -480,7 +481,7 @@
set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
#endif
-#ifdef CONFIG_X86_LOCAL_APIC
+#if defined(CONFIG_X86_LOCAL_APIC) || defined(CONFIG_X86_VISWS_APIC)
/* self generated IPI for local APIC timer */
set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
@@ -497,7 +498,7 @@
outb_p(LATCH & 0xff , 0x40); /* LSB */
outb(LATCH >> 8 , 0x40); /* MSB */
-#ifndef CONFIG_VISWS
+#ifndef CONFIG_X86_VISWS_APIC
setup_irq(2, &irq2);
#endif
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/irq.c linux-2.4.17-visws/arch/i386/kernel/irq.c
--- linux-2.4.17/arch/i386/kernel/irq.c Thu Oct 25 13:53:46 2001
+++ linux-2.4.17-visws/arch/i386/kernel/irq.c Wed Jan 2 16:45:19 2002
@@ -802,6 +802,13 @@
unsigned long probe_irq_on(void)
{
+#ifdef CONFIG_VISWS_HACKS
+/*
+ * Probing won't work for many devices
+ * with Cobalt
+ */
+ return 0;
+#else
unsigned int i;
irq_desc_t *desc;
unsigned long val;
@@ -872,6 +879,7 @@
}
return val;
+#endif /* CONFIG_VISWS_HACKS */
}
/*
@@ -943,6 +951,9 @@
int probe_irq_off(unsigned long val)
{
+#ifdef CONFIG_VISWS_HACKS
+ return 0;
+#else
int i, irq_found, nr_irqs;
nr_irqs = 0;
@@ -970,6 +981,7 @@
if (nr_irqs > 1)
irq_found = -irq_found;
return irq_found;
+#endif /* CONFIG_VISWS_HACKS */
}
/* this was setup_x86_irq but it seems pretty generic */
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/mpparse.c linux-2.4.17-visws/arch/i386/kernel/mpparse.c
--- linux-2.4.17/arch/i386/kernel/mpparse.c Fri Nov 9 14:58:18 2001
+++ linux-2.4.17-visws/arch/i386/kernel/mpparse.c Wed Jan 2 17:26:22 2002
@@ -27,6 +27,10 @@
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
+#ifdef CONFIG_VISWS
+#include <asm/sgi-cobalt.h>
+#endif
+
/* Have we found an MP table */
int smp_found_config;
@@ -67,7 +71,6 @@
* Intel MP BIOS table parsing routines:
*/
-#ifndef CONFIG_X86_VISWS_APIC
/*
* Checksum an MP configuration block.
*/
@@ -160,6 +163,11 @@
m->mpc_apicver);
}
+#ifdef CONFIG_VISWS
+ printk(" IMCR and PIC compatibility mode.\n");
+ pic_mode = 1;
+#endif
+
if (m->mpc_featureflag&(1<<0))
Dprintk(" Floating point unit present.\n");
if (m->mpc_featureflag&(1<<7))
@@ -267,6 +275,8 @@
}
}
+#ifndef CONFIG_VISWS
+
static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
{
if (!(m->mpc_flags & MPC_APIC_USABLE))
@@ -300,6 +310,8 @@
panic("Max # of irq sources exceeded!!\n");
}
+#endif
+
static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
{
Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
@@ -459,6 +471,7 @@
count += sizeof(*m);
break;
}
+#ifndef CONFIG_VISWS
case MP_IOAPIC:
{
struct mpc_config_ioapic *m=
@@ -478,6 +491,7 @@
count+=sizeof(*m);
break;
}
+#endif
case MP_LINTSRC:
{
struct mpc_config_lintsrc *m=
@@ -521,7 +535,9 @@
intsrc.mpc_type = MP_INTSRC;
intsrc.mpc_irqflag = 0; /* conforming */
intsrc.mpc_srcbus = 0;
+#ifndef CONFIG_VISWS
intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+#endif
intsrc.mpc_irqtype = mp_INT;
@@ -569,13 +585,17 @@
intsrc.mpc_srcbusirq = i;
intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+#ifndef CONFIG_VISWS
MP_intsrc_info(&intsrc);
+#endif
}
intsrc.mpc_irqtype = mp_ExtINT;
intsrc.mpc_srcbusirq = 0;
intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+#ifndef CONFIG_VISWS
MP_intsrc_info(&intsrc);
+#endif
}
static inline void __init construct_default_ISA_mptable(int mpc_default_type)
@@ -642,7 +662,9 @@
ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
ioapic.mpc_flags = MPC_APIC_USABLE;
ioapic.mpc_apicaddr = 0xFEC00000;
+#ifndef CONFIG_VISWS
MP_ioapic_info(&ioapic);
+#endif
/*
* We set up most of the low 16 IO-APIC pins according to MPS rules.
@@ -770,6 +792,8 @@
return 0;
}
+#ifndef CONFIG_VISWS_HACKS
+
void __init find_intel_smp (void)
{
unsigned int address;
@@ -808,25 +832,39 @@
printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!\n");
}
-#else
+#else /* CONFIG_VISWS_HACKS */
/*
* The Visual Workstation is Intel MP compliant in the hardware
* sense, but it doesnt have a BIOS(-configuration table).
* No problem for Linux.
*/
-void __init find_visws_smp(void)
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+void __init init_visws_smp(void)
{
- smp_found_config = 1;
+ struct mpc_config_processor *mp = (struct mpc_config_processor *)
+ (PAGE_OFFSET + CO_CPU_TAB_PHYS);
+ unsigned short ncpus = *(unsigned short *)
+ (PAGE_OFFSET + CO_CPU_NUM_PHYS);
- phys_cpu_present_map |= 2; /* or in id 1 */
- apic_version[1] |= 0x10; /* integrated APIC */
- apic_version[0] |= 0x10;
+ if(ncpus > CO_CPU_MAX) {
+ printk("find_visws_smp: got cpu count of %d at %p\n",
+ ncpus, mp);
+ return;
+ }
+
+ smp_found_config = 1;
+ while(ncpus--)
+ MP_processor_info(mp++);
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
}
-#endif
+#endif /* CONFIG_VISWS_HACKS */
/*
* - Intel MP Configuration Table
@@ -834,11 +872,8 @@
*/
void __init find_smp_config (void)
{
-#ifdef CONFIG_X86_LOCAL_APIC
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_VISWS_HACKS)
find_intel_smp();
-#endif
-#ifdef CONFIG_VISWS
- find_visws_smp();
#endif
}
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/pci-i386.h linux-2.4.17-visws/arch/i386/kernel/pci-i386.h
--- linux-2.4.17/arch/i386/kernel/pci-i386.h Sun Nov 11 10:09:32 2001
+++ linux-2.4.17-visws/arch/i386/kernel/pci-i386.h Wed Jan 2 16:45:20 2002
@@ -4,7 +4,7 @@
* (c) 1999 Martin Mares <mj@ucw.cz>
*/
-#undef DEBUG
+#define DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/pci-visws.c linux-2.4.17-visws/arch/i386/kernel/pci-visws.c
--- linux-2.4.17/arch/i386/kernel/pci-visws.c Sun Nov 4 09:31:58 2001
+++ linux-2.4.17-visws/arch/i386/kernel/pci-visws.c Wed Jan 2 16:45:20 2002
@@ -13,13 +13,17 @@
#include <linux/irq.h>
#include <asm/smp.h>
-#include <asm/lithium.h>
#include <asm/io.h>
+#include <asm/sgi-lithium.h>
#include "pci-i386.h"
+#define DBG(x...) printk(x)
+
unsigned int pci_probe = 0;
+struct pci_fixup pcibios_fixups[] = { { 0 } };
+
/*
* The VISWS uses configuration access type 1 only.
*/
@@ -96,10 +100,13 @@
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
} else
p = dev;
- irq = visws_get_PCI_irq_vector(p->bus->number, PCI_SLOT(p->devfn), pin+1);
+
+ irq = visws_get_PCI_irq_vector(p->bus->number,
+ PCI_SLOT(p->devfn), pin);
if (irq >= 0)
dev->irq = irq;
- DBG("PCI IRQ: %s pin %d -> %d\n", dev->slot_name, pin, irq);
+ DBG("PCI IRQ: Bus %d, Slot %d, Pin %d -> %d\n",
+ dev->bus->number, PCI_SLOT(p->devfn), pin, irq);
}
}
@@ -117,11 +124,12 @@
void __init pcibios_init(void)
{
- unsigned int sec_bus = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
+ unsigned int bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
+ unsigned int bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
- printk("PCI: Probing PCI hardware on host buses 00 and %02x\n", sec_bus);
- pci_scan_bus(0, &visws_pci_ops, NULL);
- pci_scan_bus(sec_bus, &visws_pci_ops, NULL);
+ DBG("PCI: Probing PCI hardware on host buses %02x and %02x\n", bus0, bus1);
+ pci_scan_bus(bus0, &visws_pci_ops, NULL);
+ pci_scan_bus(bus1, &visws_pci_ops, NULL);
pcibios_fixup_irqs();
pcibios_resource_survey();
}
@@ -138,4 +146,9 @@
void __init pcibios_penalize_isa_irq(irq)
{
+}
+
+unsigned int pcibios_assign_all_busses(void)
+{
+ return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
}
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/process.c linux-2.4.17-visws/arch/i386/kernel/process.c
--- linux-2.4.17/arch/i386/kernel/process.c Thu Oct 4 18:42:54 2001
+++ linux-2.4.17-visws/arch/i386/kernel/process.c Wed Jan 2 16:45:20 2002
@@ -362,6 +362,11 @@
: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
}
+#ifdef CONFIG_VISWS
+static void visws_restart(void);
+static void visws_power_off(void);
+#endif
+
void machine_restart(char * __unused)
{
#if CONFIG_SMP
@@ -401,6 +406,10 @@
disable_IO_APIC();
#endif
+#ifdef CONFIG_VISWS
+ visws_restart();
+#endif
+
if(!reboot_thru_bios) {
/* rebooting needs to touch the page at absolute addr 0 */
*((unsigned short *)__va(0x472)) = reboot_mode;
@@ -427,6 +436,9 @@
void machine_power_off(void)
{
+#ifdef CONFIG_VISWS_HACKS
+ visws_power_off();
+#endif
if (pm_power_off)
pm_power_off();
}
@@ -599,6 +611,37 @@
return 0;
}
+
+#ifdef CONFIG_VISWS
+
+#include <linux/pci.h>
+#include <asm/sgi-piix.h>
+
+static void visws_restart(void)
+{
+ /*
+ * Visual Workstations restart after this
+ * register is poked on the PIIX4
+ */
+ outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+static void visws_power_off(void)
+{
+ unsigned short pm_status;
+
+ while((pm_status = inw(PMSTS_PORT)) & 0x100) {
+ outw(pm_status, PMSTS_PORT);
+ }
+
+ outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+ udelay(10000);
+
+ pcibios_write_config_dword(PIIX4_BUS, SPECIAL_DEV, SPECIAL_REG,
+ PIIX_SPECIAL_STOP);
+}
+#endif /* CONFIG_VISWS */
/*
* fill in the user structure for a core dump..
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/setup.c linux-2.4.17-visws/arch/i386/kernel/setup.c
--- linux-2.4.17/arch/i386/kernel/setup.c Fri Dec 21 09:41:53 2001
+++ linux-2.4.17-visws/arch/i386/kernel/setup.c Wed Jan 2 17:24:56 2002
@@ -106,13 +106,16 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/smp.h>
-#include <asm/cobalt.h>
#include <asm/msr.h>
#include <asm/desc.h>
#include <asm/e820.h>
#include <asm/dma.h>
#include <asm/mpspec.h>
#include <asm/mmu_context.h>
+#ifdef CONFIG_VISWS
+#include <asm/sgi-cobalt.h>
+#include <asm/sgi-piix.h>
+#endif
/*
* Machine setup..
*/
@@ -190,10 +193,6 @@
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
-#ifdef CONFIG_VISWS
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
#define PIIX_PM_START 0x0F80
#define SIO_GPIO_START 0x0FC0
@@ -236,7 +235,18 @@
#define SIO_PM_GP_EN 0x80
-static void __init visws_get_board_type_and_rev(void)
+#ifdef CONFIG_VISWS
+char visws_board_type = -1;
+char visws_board_rev = -1;
+
+#ifdef CONFIG_VISWS_HACKS
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
+void init_visws_smp(void);
+#endif
+
+static void __init
+visws_get_board_type_and_rev(void)
{
int raw;
@@ -292,28 +302,31 @@
raw = inb_p(SIO_GP_DATA1);
raw &= 0x7f; /* 7 bits of valid board revision ID. */
- if (visws_board_type == VISWS_320) {
- if (raw < 0x6) {
- visws_board_rev = 4;
- } else if (raw < 0xc) {
- visws_board_rev = 5;
- } else {
- visws_board_rev = 6;
-
- }
- } else if (visws_board_type == VISWS_540) {
- visws_board_rev = 2;
- } else {
- visws_board_rev = raw;
- }
-
- printk(KERN_INFO "Silicon Graphics %s (rev %d)\n",
- visws_board_type == VISWS_320 ? "320" :
- (visws_board_type == VISWS_540 ? "540" :
- "unknown"),
- visws_board_rev);
- }
-#endif
+ switch(visws_board_type) {
+ case VISWS_320:
+ if (raw < 0x6) {
+ visws_board_rev = 4;
+ } else if (raw < 0xc) {
+ visws_board_rev = 5;
+ } else {
+ visws_board_rev = 6;
+ }
+ break;
+ case VISWS_540:
+ visws_board_rev = 2;
+ break;
+ default:
+ visws_board_rev = raw;
+ break;
+ }
+
+ printk(KERN_INFO "Silicon Graphics %s (rev %d)\n",
+ visws_board_type == VISWS_320 ? "320" :
+ (visws_board_type == VISWS_540 ? "540" :
+ "unknown"),
+ visws_board_rev);
+}
+#endif /* CONFIG_VISWS */
static char command_line[COMMAND_LINE_SIZE];
@@ -700,10 +713,44 @@
add_memory_region(0, LOWMEMSIZE(), E820_RAM);
add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
}
- printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+ printk(KERN_DEBUG "BIOS-provided physical RAM map:\n");
print_memory_map(who);
} /* setup_memory_region */
+#ifdef CONFIG_VISWS_HACKS
+void __init setup_visws_memory_region(void)
+{
+ /*
+ * Some silly defaults until I find out how
+ * to get the memory size.
+ */
+ long long mem_size = 128 << 20;
+ long long gfx_mem_size = 16 << 20;
+ long long end_mem = HIGH_MEMORY + mem_size;
+
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, mem_size, E820_RAM);
+ add_memory_region(end_mem, gfx_mem_size ,E820_RESERVED);
+
+ /*
+ * this hardcodes the graphics memory to 16 MB
+ * it really should be sized dynamically (or at least
+ * set as a boot param)
+ */
+ if(!sgivwfb_mem_size)
+ sgivwfb_mem_size = gfx_mem_size;
+
+ /*
+ * Trim to nearest MB
+ */
+ sgivwfb_mem_size &= ~((1<<20) - 1);
+ sgivwfb_mem_phys = end_mem;
+
+ printk(KERN_INFO "visws-hacked physical RAM map:\n");
+ print_memory_map("visws");
+}
+#endif /* CONFIG_VISWS_HACKS */
+
static void __init parse_mem_cmdline (char ** cmdline_p)
{
@@ -723,6 +770,13 @@
* "mem=XXX[KkmM]@XXX[KkmM]" defines a memory region from
* <start> to <start>+<mem>, overriding the bios size.
*/
+#ifdef CONFIG_VISWS
+ if (c == ' ' && !memcmp(from,"gfxmem=",7)) {
+ if (to != command_line) to--;
+ sgivwfb_mem_size = memparse(from+7, &from);
+ printk("Got gfxmem size %ld\n", sgivwfb_mem_size);
+ }
+#endif
if (c == ' ' && !memcmp(from, "mem=", 4)) {
if (to != command_line)
to--;
@@ -757,7 +811,19 @@
mem_size -= HIGH_MEMORY;
usermem=0;
}
+#ifdef CONFIG_VISWS_HACKS
+ add_memory_region(start_at,
+ mem_size - sgivwfb_mem_size,
+ E820_RAM);
+ add_memory_region(start_at + mem_size -
+ sgivwfb_mem_size,
+ sgivwfb_mem_size,
+ E820_RESERVED);
+ sgivwfb_mem_phys = start_at + mem_size -
+ sgivwfb_mem_size;
+#else
add_memory_region(start_at, mem_size, E820_RAM);
+#endif /* CONFIG_VISWS_HACKS */
}
}
/* acpismp=force forces parsing and use of the ACPI SMP table */
@@ -773,7 +839,7 @@
}
*to = '\0';
*cmdline_p = command_line;
- if (usermem) {
+ if (1) {
printk(KERN_INFO "user-defined physical RAM map:\n");
print_memory_map("user");
}
@@ -787,11 +853,12 @@
#ifdef CONFIG_VISWS
visws_get_board_type_and_rev();
-#endif
+#else /* !CONFIG_VISWS */
ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV);
drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
+#endif
apm_info.bios = APM_BIOS_INFO;
if( SYS_DESC_TABLE.length != 0 ) {
MCA_bus = SYS_DESC_TABLE.table[3] &0x2;
@@ -806,7 +873,13 @@
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif
+
+#ifdef CONFIG_VISWS_HACKS
+ boot_cpu_data.hlt_works_ok = 0;
+ setup_visws_memory_region();
+#else
setup_memory_region();
+#endif /* CONFIG_VISWS_HACKS */
if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
@@ -822,6 +895,7 @@
parse_mem_cmdline(cmdline_p);
+
#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
@@ -985,6 +1059,7 @@
#ifdef CONFIG_SMP
smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
#endif
+
paging_init();
#ifdef CONFIG_X86_LOCAL_APIC
/*
@@ -992,8 +1067,12 @@
*/
if (smp_found_config)
get_smp_config();
- init_apic_mappings();
+#ifdef CONFIG_X86_VISWS_APIC
+ init_visws_smp();
#endif
+ init_apic_mappings();
+
+#endif /* CONFIG_X86_LOCAL_APIC */
/*
@@ -1038,7 +1117,7 @@
pci_mem_start = low_mem_size;
#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
+#if defined(CONFIG_VGA_CONSOLE) && !defined(CONFIG_VISWS)
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/smp.c linux-2.4.17-visws/arch/i386/kernel/smp.c
--- linux-2.4.17/arch/i386/kernel/smp.c Fri Dec 21 09:41:53 2001
+++ linux-2.4.17-visws/arch/i386/kernel/smp.c Wed Jan 2 16:45:21 2002
@@ -137,7 +137,9 @@
/*
* Wait for idle.
*/
+#ifndef CONFIG_VISWS_HACKS
apic_wait_icr_idle();
+#endif
/*
* No need to touch the target chip field
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/smpboot.c linux-2.4.17-visws/arch/i386/kernel/smpboot.c
--- linux-2.4.17/arch/i386/kernel/smpboot.c Fri Dec 21 09:41:53 2001
+++ linux-2.4.17-visws/arch/i386/kernel/smpboot.c Wed Jan 2 16:45:21 2002
@@ -1068,9 +1068,9 @@
smp_num_cpus = 1;
goto smp_done;
}
-
- verify_local_APIC();
-
+#ifndef CONFIG_VISWS_HACKS
+ verify_local_APIC();
+#endif
/*
* If SMP should be disabled, then really disable it!
*/
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/time.c linux-2.4.17-visws/arch/i386/kernel/time.c
--- linux-2.4.17/arch/i386/kernel/time.c Sun Nov 11 10:20:21 2001
+++ linux-2.4.17-visws/arch/i386/kernel/time.c Wed Jan 2 16:45:21 2002
@@ -56,7 +56,7 @@
#include <linux/config.h>
#include <asm/fixmap.h>
-#include <asm/cobalt.h>
+#include <asm/sgi-cobalt.h>
/*
* for x86_do_profile()
@@ -708,10 +708,6 @@
/* Enable (unmask) the timer interrupt */
co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
- /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */
- setup_irq(CO_IRQ_TIMER, &irq0);
-#else
- setup_irq(0, &irq0);
#endif
+ setup_irq(0, &irq0);
}
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/trampoline.S linux-2.4.17-visws/arch/i386/kernel/trampoline.S
--- linux-2.4.17/arch/i386/kernel/trampoline.S Thu Oct 4 18:42:54 2001
+++ linux-2.4.17-visws/arch/i386/kernel/trampoline.S Wed Jan 2 16:45:21 2002
@@ -56,7 +56,11 @@
lmsw %ax # into protected mode
jmp flush_instr
flush_instr:
+#ifdef CONFIG_VISWS_HACKS
+ ljmpl $__KERNEL_CS, $0x0010002e
+#else
ljmpl $__KERNEL_CS, $0x00100000
+#endif
# jump to startup_32 in arch/i386/kernel/head.S
idt_48:
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/traps.c linux-2.4.17-visws/arch/i386/kernel/traps.c
--- linux-2.4.17/arch/i386/kernel/traps.c Sun Sep 30 12:26:08 2001
+++ linux-2.4.17-visws/arch/i386/kernel/traps.c Wed Jan 2 16:45:22 2002
@@ -43,8 +43,8 @@
#ifdef CONFIG_X86_VISWS_APIC
#include <asm/fixmap.h>
-#include <asm/cobalt.h>
-#include <asm/lithium.h>
+#include <asm/sgi-cobalt.h>
+#include <asm/sgi-lithium.h>
#endif
#include <linux/irq.h>
@@ -825,56 +825,6 @@
#ifdef CONFIG_X86_VISWS_APIC
-/*
- * On Rev 005 motherboards legacy device interrupt lines are wired directly
- * to Lithium from the 307. But the PROM leaves the interrupt type of each
- * 307 logical device set appropriate for the 8259. Later we'll actually use
- * the 8259, but for now we have to flip the interrupt types to
- * level triggered, active lo as required by Lithium.
- */
-
-#define REG 0x2e /* The register to read/write */
-#define DEV 0x07 /* Register: Logical device select */
-#define VAL 0x2f /* The value to read/write */
-
-static void
-superio_outb(int dev, int reg, int val)
-{
- outb(DEV, REG);
- outb(dev, VAL);
- outb(reg, REG);
- outb(val, VAL);
-}
-
-static int __attribute__ ((unused))
-superio_inb(int dev, int reg)
-{
- outb(DEV, REG);
- outb(dev, VAL);
- outb(reg, REG);
- return inb(VAL);
-}
-
-#define FLOP 3 /* floppy logical device */
-#define PPORT 4 /* parallel logical device */
-#define UART5 5 /* uart2 logical device (not wired up) */
-#define UART6 6 /* uart1 logical device (THIS is the serial port!) */
-#define IDEST 0x70 /* int. destination (which 307 IRQ line) reg. */
-#define ITYPE 0x71 /* interrupt type register */
-
-/* interrupt type bits */
-#define LEVEL 0x01 /* bit 0, 0 == edge triggered */
-#define ACTHI 0x02 /* bit 1, 0 == active lo */
-
-static void
-superio_init(void)
-{
- if (visws_board_type == VISWS_320 && visws_board_rev == 5) {
- superio_outb(UART6, IDEST, 0); /* 0 means no intr propagated */
- printk("SGI 320 rev 5: disabling 307 uart1 interrupt\n");
- }
-}
-
static void
lithium_init(void)
{
@@ -885,9 +835,11 @@
printk("Lithium PCI Bridge B (PIIX4), Bus Number: %d\n",
li_pcib_read16(LI_PCI_BUSNUM) & 0xff);
- /* XXX blindly enables all interrupts */
- li_pcia_write16(LI_PCI_INTEN, 0xffff);
- li_pcib_write16(LI_PCI_INTEN, 0xffff);
+#define A01234 (LI_INTA_0|LI_INTA_1|LI_INTA_2|LI_INTA_3|LI_INTA_4)
+#define BCD (LI_INTB|LI_INTC|LI_INTD)
+#define ALLDEVS (A01234|BCD)
+ li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+ li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
}
static void
@@ -898,6 +850,7 @@
* use it and set it up here to start the Cobalt clock
*/
set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+ setup_local_APIC();
printk("Local APIC ID %lx\n", apic_read(APIC_ID));
printk("Local APIC Version %lx\n", apic_read(APIC_LVR));
@@ -956,7 +909,6 @@
cpu_init();
#ifdef CONFIG_X86_VISWS_APIC
- superio_init();
lithium_init();
cobalt_init();
#endif
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/arch/i386/kernel/visws_apic.c linux-2.4.17-visws/arch/i386/kernel/visws_apic.c
--- linux-2.4.17/arch/i386/kernel/visws_apic.c Fri Feb 9 11:29:44 2001
+++ linux-2.4.17-visws/arch/i386/kernel/visws_apic.c Wed Jan 2 17:22:28 2002
@@ -10,6 +10,8 @@
* hardware in the system uses this controller directly. Legacy devices
* are connected to the PIIX4 which in turn has its 8259(s) connected to
* a of the Cobalt APIC entry.
+ *
+ * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
*/
#include <linux/ptrace.h>
@@ -24,6 +26,7 @@
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <asm/system.h>
@@ -34,10 +37,17 @@
#include <asm/pgtable.h>
#include <asm/delay.h>
#include <asm/desc.h>
+#include <asm/sgi-cobalt.h>
-#include <asm/cobalt.h>
+int irq_vector[NR_IRQS] = { FIRST_EXTERNAL_VECTOR, 0 };
-#include <linux/irq.h>
+#define IRQ_VECTOR(irq) irq_vector[irq]
+
+static spinlock_t cobalt_lock = SPIN_LOCK_UNLOCKED;
+
+static void dump_cobalt_vectors(void);
+static void co_apic_set(int, int);
+static int assign_irq_vector(int irq);
/*
* This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
@@ -49,57 +59,63 @@
* interrupt controller type, and through a special virtual interrupt-
* controller. Device drivers only see the virtual interrupt sources.
*/
-
-#define CO_IRQ_BASE 0x20 /* This is the 0x20 in init_IRQ()! */
-
-static void startup_piix4_master_irq(unsigned int irq);
+static unsigned int startup_piix4_master_irq(unsigned int irq);
static void shutdown_piix4_master_irq(unsigned int irq);
-static void do_piix4_master_IRQ(unsigned int irq, struct pt_regs * regs);
-#define enable_piix4_master_irq startup_piix4_master_irq
-#define disable_piix4_master_irq shutdown_piix4_master_irq
+static void ack_piix4_master_irq(unsigned int irq);
+static void end_piix4_master_irq(unsigned int irq);
+static void enable_piix4_master_irq(unsigned int irq)
+{ startup_piix4_master_irq(irq); }
+static void disable_piix4_master_irq(unsigned int irq)
+{ shutdown_piix4_master_irq(irq); }
static struct hw_interrupt_type piix4_master_irq_type = {
"PIIX4-master",
startup_piix4_master_irq,
shutdown_piix4_master_irq,
- do_piix4_master_IRQ,
enable_piix4_master_irq,
- disable_piix4_master_irq
+ disable_piix4_master_irq,
+ ack_piix4_master_irq,
+ end_piix4_master_irq
};
-static void enable_piix4_virtual_irq(unsigned int irq);
-static void disable_piix4_virtual_irq(unsigned int irq);
-#define startup_piix4_virtual_irq enable_piix4_virtual_irq
-#define shutdown_piix4_virtual_irq disable_piix4_virtual_irq
+static unsigned int startup_piix4_virtual_irq(unsigned int irq);
+static void shutdown_piix4_virtual_irq(unsigned int irq);
+static void ack_piix4_virtual_irq(unsigned int irq) { }
+static void end_piix4_virtual_irq(unsigned int irq) { }
+static void enable_piix4_virtual_irq(unsigned int irq)
+{ startup_piix4_virtual_irq(irq); }
+static void disable_piix4_virtual_irq(unsigned int irq)
+{ shutdown_piix4_virtual_irq(irq); }
static struct hw_interrupt_type piix4_virtual_irq_type = {
"PIIX4-virtual",
startup_piix4_virtual_irq,
shutdown_piix4_virtual_irq,
- 0, /* no handler, it's never called physically */
enable_piix4_virtual_irq,
- disable_piix4_virtual_irq
+ disable_piix4_virtual_irq,
+ ack_piix4_virtual_irq,
+ end_piix4_virtual_irq
};
/*
* This is the SGI Cobalt (IO-)APIC:
*/
-static void do_cobalt_IRQ(unsigned int irq, struct pt_regs * regs);
static void enable_cobalt_irq(unsigned int irq);
static void disable_cobalt_irq(unsigned int irq);
-static void startup_cobalt_irq(unsigned int irq);
-#define shutdown_cobalt_irq disable_cobalt_irq
-
-static spinlock_t irq_controller_lock = SPIN_LOCK_UNLOCKED;
+static unsigned int startup_cobalt_irq(unsigned int irq);
+static void shutdown_cobalt_irq(unsigned int irq);
+static void ack_cobalt_irq(unsigned int irq);
+static void end_cobalt_irq(unsigned int irq);
static struct hw_interrupt_type cobalt_irq_type = {
"Cobalt-APIC",
startup_cobalt_irq,
shutdown_cobalt_irq,
- do_cobalt_IRQ,
enable_cobalt_irq,
- disable_cobalt_irq
+ disable_cobalt_irq,
+ ack_cobalt_irq,
+ end_cobalt_irq
};
@@ -115,120 +131,112 @@
* Cobalt (IO)-APIC functions to handle PCI devices.
*/
+static int co_apic_ide0_hack(void)
+{
+ extern char visws_board_type;
+ extern char visws_board_rev;
+
+ if(visws_board_type == VISWS_320 && visws_board_rev == 5)
+ return 5;
+ return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+ if(IS_CO_APIC(irq))
+ return CO_APIC(irq);
+
+ switch(irq) {
+ case 0: return CO_APIC_CPU;
+ case CO_IRQ_IDE0: return co_apic_ide0_hack();
+ case CO_IRQ_IDE1: return CO_APIC_IDE1;
+ default: return -1;
+ }
+}
+
static void disable_cobalt_irq(unsigned int irq)
{
- /* XXX undo the APIC entry here? */
+ int entry = is_co_apic(irq);
- /*
- * definitely, we do not want to have IRQ storms from
- * unused devices --mingo
- */
+ if(entry == -1) {
+ printk(KERN_ERR "**** Tried to disable non-Cobalt IRQ %d!", irq);
+ return;
+ }
+
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+ (void)co_apic_read(CO_APIC_LO(entry));
}
static void enable_cobalt_irq(unsigned int irq)
{
+ int ent = is_co_apic(irq);
+
+ if(ent == -1) {
+ printk(KERN_ERR "**** Tried to enable non-Cobalt IRQ %d!", irq);
+ return;
+ }
+ co_apic_set(ent, irq);
}
/*
* Set the given Cobalt APIC Redirection Table entry to point
* to the given IDT vector/index.
*/
-static void co_apic_set(int entry, int idtvec)
+static void co_apic_set(int entry, int irq)
{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (CO_IRQ_BASE+idtvec));
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL|IRQ_VECTOR(irq));
+/* co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL| (0x20+irq)); */
co_apic_write(CO_APIC_HI(entry), 0);
-
- printk("Cobalt APIC Entry %d IDT Vector %d\n", entry, idtvec);
}
/*
* "irq" really just serves to identify the device. Here is where we
* map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_x86_irq -> irq_desc->startup()
+ * This is called via request_irq -> setup_irq -> irq_desc->startup()
*/
-static void startup_cobalt_irq(unsigned int irq)
+extern struct desc_struct idt_table[256];
+static unsigned int startup_cobalt_irq(unsigned int irq)
{
- /*
- * These "irq"'s are wired to the same Cobalt APIC entries
- * for all (known) motherboard types/revs
- */
- switch (irq) {
- case CO_IRQ_TIMER: co_apic_set(CO_APIC_CPU, CO_IRQ_TIMER);
- return;
-
- case CO_IRQ_ENET: co_apic_set(CO_APIC_ENET, CO_IRQ_ENET);
- return;
-
- case CO_IRQ_SERIAL: return; /* XXX move to piix4-8259 "virtual" */
-
- case CO_IRQ_8259: co_apic_set(CO_APIC_8259, CO_IRQ_8259);
- return;
-
- case CO_IRQ_IDE:
- switch (visws_board_type) {
- case VISWS_320:
- switch (visws_board_rev) {
- case 5:
- co_apic_set(CO_APIC_0_5_IDE0, CO_IRQ_IDE);
- co_apic_set(CO_APIC_0_5_IDE1, CO_IRQ_IDE);
- return;
- case 6:
- co_apic_set(CO_APIC_0_6_IDE0, CO_IRQ_IDE);
- co_apic_set(CO_APIC_0_6_IDE1, CO_IRQ_IDE);
- return;
- }
- case VISWS_540:
- switch (visws_board_rev) {
- case 2:
- co_apic_set(CO_APIC_1_2_IDE0, CO_IRQ_IDE);
- return;
- }
- }
- break;
- default:
- panic("huh?");
- }
+ unsigned long flags;
+ if(irq == 4)
+ return 0; /* serial hack? */
+ printk(KERN_WARNING "IRQ %d, Cobalt APIC entry %d, IDT vector %x: starting up\n",
+ irq, is_co_apic(irq), IRQ_VECTOR(irq));
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if ((irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS|IRQ_WAITING)))
+ irq_desc[irq].status &= ~(IRQ_DISABLED|IRQ_INPROGRESS|IRQ_WAITING);
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+ return 0;
}
-/*
- * This is the handle() op in do_IRQ()
- */
-static void do_cobalt_IRQ(unsigned int irq, struct pt_regs * regs)
+static void shutdown_cobalt_irq(unsigned int irq)
{
- struct irqaction * action;
- irq_desc_t *desc = irq_desc + irq;
-
- spin_lock(&irq_controller_lock);
- {
- unsigned int status;
- /* XXX APIC EOI? */
- status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING);
- action = NULL;
- if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
- action = desc->action;
- status |= IRQ_INPROGRESS;
- }
- desc->status = status;
- }
- spin_unlock(&irq_controller_lock);
+ if(irq == 4)
+ return; /* serial hack? */
+ printk(KERN_WARNING "IRQ %d, Cobalt APIC entry %d, IDT vector %x: shutting down\n",
+ irq, is_co_apic(irq), IRQ_VECTOR(irq));
+ disable_cobalt_irq(irq);
+}
- /* Exit early if we had no action or it was disabled */
- if (!action)
- return;
+static void ack_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
- handle_IRQ_event(irq, regs, action);
+ spin_lock_irqsave(&cobalt_lock, flags);
+ disable_cobalt_irq(irq);
+ apic_write(APIC_EOI, APIC_EIO_ACK);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
- (void)co_cpu_read(CO_CPU_REV); /* Sync driver ack to its h/w */
- apic_write(APIC_EOI, APIC_EIO_ACK); /* Send EOI to Cobalt APIC */
+static void end_cobalt_irq(unsigned int irq)
+{
+ unsigned long flags;
- spin_lock(&irq_controller_lock);
- {
- unsigned int status = desc->status & ~IRQ_INPROGRESS;
- desc->status = status;
- if (!(status & IRQ_DISABLED))
- enable_cobalt_irq(irq);
- }
- spin_unlock(&irq_controller_lock);
+ spin_lock_irqsave(&cobalt_lock, flags);
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_cobalt_irq(irq);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
}
/*
@@ -237,7 +245,8 @@
* floppy
* parallel
* serial
- * audio (?)
+ * [ps2 kbd]
+ * [ps2 mouse]
*
* None of these get Cobalt APIC entries, neither do they have IDT
* entries. These interrupts are purely virtual and distributed from
@@ -251,7 +260,7 @@
* manipulated by any driver.
*/
-static void startup_piix4_master_irq(unsigned int irq)
+static unsigned int startup_piix4_master_irq(unsigned int irq)
{
/* ICW1 */
outb(0x11, 0x20);
@@ -285,15 +294,24 @@
shutdown_cobalt_irq(irq);
}
-static void do_piix4_master_IRQ(unsigned int irq, struct pt_regs * regs)
+static void ack_piix4_master_irq(unsigned int irq)
+{
+}
+
+static void end_piix4_master_irq(unsigned int irq)
+{
+}
+
+void piix4_master_intr(int irq, void *dev_id, struct pt_regs * regs)
{
int realirq, mask;
+ irq_desc_t *desc;
/* Find out what's interrupting in the PIIX4 8259 */
- spin_lock(&irq_controller_lock);
outb(0x0c, 0x20); /* OCW3 Poll command */
realirq = inb(0x20);
+ desc = irq_desc + realirq;
if (!(realirq & 0x80)) {
/*
@@ -319,92 +337,176 @@
*/
outb(0x20, 0x20);
- spin_unlock(&irq_controller_lock);
-
/*
* handle this 'virtual interrupt' as a Cobalt one now.
*/
kstat.irqs[smp_processor_id()][irq]++;
- do_cobalt_IRQ(realirq, regs);
-
- spin_lock(&irq_controller_lock);
+ kstat.irqs[smp_processor_id()][realirq]++;
+ handle_IRQ_event(realirq, regs, desc->action);
{
- irq_desc_t *desc = irq_desc + realirq;
-
if (!(desc->status & IRQ_DISABLED))
enable_piix4_virtual_irq(realirq);
}
- spin_unlock(&irq_controller_lock);
return;
out_unlock:
- spin_unlock(&irq_controller_lock);
return;
}
-static void enable_piix4_virtual_irq(unsigned int irq)
+static unsigned int startup_piix4_virtual_irq(unsigned int irq)
{
/*
* assumes this irq is one of the legacy devices
- */
-
unsigned int mask = inb(0x21);
mask &= ~(1 << irq);
- outb(mask, 0x21);
- enable_cobalt_irq(irq);
+ outb(mask, 0x21);*/
+ return 0;
}
/*
* assumes this irq is one of the legacy devices
*/
-static void disable_piix4_virtual_irq(unsigned int irq)
+static void shutdown_piix4_virtual_irq(unsigned int irq)
+{/*
+ unsigned int mask = inb(0x21);
+ mask &= ~(1 << irq);
+ outb(mask, 0x21);*/
+}
+
+static struct irqaction master_action =
+ { piix4_master_intr, 0, 0, "piix4_master_intr", NULL, NULL };
+
+int visws_get_PCI_irq_vector(int bus, int slot, int line)
{
- unsigned int mask;
+ int irq;
+#define BRIDGE_A 1 /* XXX simplistic bus numbering! */
+#define BRIDGE_B 0 /* XXX simplistic bus numbering! */
+/* XXX note how we pass the bus number as the "bridge id" -- simplistic! */
+#define BASE(bridge) ((bridge) == BRIDGE_B ? \
+ CO_APIC_PCIB_BASE0 : \
+ CO_APIC_PCIA_BASE0)
+ /*
+ * PIIX4 USB is on Bus 0, Slot 4, Line 3
+ */
+ if (bus == BRIDGE_B && slot == 4 && line == 3) {
+ irq = CO_IRQ(CO_APIC_PIIX4_USB);
+ goto out;
+ }
- disable_cobalt_irq(irq);
+ /*
+ * First pin spread down 1 APIC entry per slot
+ */
+ if (line == 0) {
+ irq = CO_IRQ(BASE(bus) + slot);
+ goto out;
+ }
- mask = inb(0x21);
- mask &= ~(1 << irq);
- outb(mask, 0x21);
+ /* lines 1,2,3 from any slot is shared in this twirly pattern */
+ if (bus == BRIDGE_A) {
+ /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
+ irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (line-1)) % 2));
+ goto out;
+ } else { /* bus == BRIDGE_B */
+ /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
+ if (slot == 0) slot = 3; /* same pattern */
+ irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3-slot) + (line-1) % 3));
+ goto out;
+ }
+ out:
+ printk(KERN_DEBUG "get_irq_vector: Bus %d Slot %d Line %d -> IRQ %d\n",
+ bus, slot, line, irq);
+ return irq;
+#undef BRIDGE_A
+#undef BRIDGE_B
+#undef BASE
}
-static struct irqaction master_action =
- { no_action, 0, 0, "PIIX4-8259", NULL, NULL };
+#if (CO_IRQ_APIC0 + CO_APIC_LAST + 1) > NR_IRQS
+#error NR_IRQS too small
+#endif
+
+extern void (*interrupt[NR_IRQS])(void);
void init_VISWS_APIC_irqs(void)
{
int i;
- for (i = 0; i < 16; i++) {
+ for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
- /*
- * Cobalt IRQs are mapped to standard ISA
- * interrupt vectors:
- */
- switch (i) {
- /*
- * Only CO_IRQ_8259 will be raised
- * externally.
- */
- case CO_IRQ_8259:
+ if(i == 0) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if(i == 4) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if(i == CO_IRQ_IDE0) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }
+ else if(i == CO_IRQ_IDE1) {
+ irq_desc[i].handler = &cobalt_irq_type;
+ }/*
+ else if(i == CO_IRQ_8259) {
irq_desc[i].handler = &piix4_master_irq_type;
- break;
- case CO_IRQ_FLOPPY:
- case CO_IRQ_PARLL:
+ }
+ else if(i < CO_IRQ_APIC0) {
irq_desc[i].handler = &piix4_virtual_irq_type;
- break;
- default:
+ }*/
+ else if(IS_CO_APIC(i)) {
irq_desc[i].handler = &cobalt_irq_type;
- break;
}
+ assign_irq_vector(i);
}
+/*
+ setup_irq(CO_IRQ_8259, &master_action);
+*/
+}
- /*
- * The master interrupt is always present:
- */
- setup_x86_irq(CO_IRQ_8259, &master_action);
+static int __init assign_irq_vector(int irq)
+{
+ static int current_vector = FIRST_EXTERNAL_VECTOR;
+
+ IRQ_VECTOR(irq) = irq + FIRST_EXTERNAL_VECTOR;
+ return IRQ_VECTOR(irq);
+
+ if(IRQ_VECTOR(irq) > 0) {
+ printk("Assigned IRQ %d to IDT %x\n", irq, IRQ_VECTOR(irq));
+ return IRQ_VECTOR(irq);
+ }
+
+ next:
+ current_vector += 1;
+ if(current_vector == SYSCALL_VECTOR)
+ goto next;
+
+ if(current_vector == FIRST_SYSTEM_VECTOR)
+ panic("ran out of interrupt sources!");
+
+ IRQ_VECTOR(irq) = current_vector;
+
+ printk("Assigned IRQ %d to IDT %x\n", irq, IRQ_VECTOR(irq));
+
+ return current_vector;
}
+int get_cobalt_entries(char *buf)
+{
+ int i;
+ unsigned long value;
+ char *p = buf;
+
+ p += sprintf(p, "Entry Value Notes\n");
+ for(i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+ p += sprintf(p, "%2d ", i);
+ value = co_apic_read(CO_APIC_LO(i));
+ p += sprintf(p, "0x%08lx ", value);
+ if(value & CO_APIC_MASK)
+ p += sprintf(p, "masked ");
+ if(value & CO_APIC_LEVEL)
+ p += sprintf(p, "level " );
+ p += sprintf(p, "\n");
+ }
+ return p - buf;
+}
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/drivers/net/eepro100.c linux-2.4.17-visws/drivers/net/eepro100.c
--- linux-2.4.17/drivers/net/eepro100.c Fri Dec 21 09:41:54 2001
+++ linux-2.4.17-visws/drivers/net/eepro100.c Wed Jan 2 19:50:04 2002
@@ -302,6 +302,7 @@
outw(val, port);
}
+#define USE_IO
#ifndef USE_IO
/* Currently alpha headers define in/out macros.
Undefine them. 2000/03/30 SAW */
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/drivers/video/sgivwfb.c linux-2.4.17-visws/drivers/video/sgivwfb.c
--- linux-2.4.17/drivers/video/sgivwfb.c Wed Nov 14 14:52:20 2001
+++ linux-2.4.17-visws/drivers/video/sgivwfb.c Wed Jan 2 17:24:22 2002
@@ -49,8 +49,8 @@
*/
/* set by arch/i386/kernel/setup.c */
-u_long sgivwfb_mem_phys;
-u_long sgivwfb_mem_size;
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
static volatile char *fbmem;
static asregs *regs;
@@ -86,6 +86,18 @@
0 /* par not activated */
};
+static struct sgivwfb_par par_current_new = {
+ { /* var (screeninfo) */
+ /* 800x600, 16 bpp */
+ 800, 600, 800, 600, 0, 0, 16, 0,
+ {0, 16, 0}, {0, 16, 0}, {0, 16, 0}, {0, 0, 0},
+ 0, 0, -1, -1, 0, 25000, 88, 40, 23, 1, 128, 4,
+ 0, FB_VMODE_NONINTERLACED
+ },
+ 0, /* timing_num */
+ 0 /* par not activated */
+};
+
/*
* Interface used by the world
*/
@@ -660,7 +672,6 @@
/* XXX FIXME - should try to pick best refresh rate */
/* for now, pick closest dot-clock within 3MHz*/
-#error "Floating point not allowed in kernel"
req_dot = (int)((1.0e3/1.0e6) / (1.0e-12 * (float)var->pixclock));
printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n", var->pixclock,
req_dot);
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/fs/proc/proc_misc.c linux-2.4.17-visws/fs/proc/proc_misc.c
--- linux-2.4.17/fs/proc/proc_misc.c Tue Nov 20 21:29:09 2001
+++ linux-2.4.17-visws/fs/proc/proc_misc.c Wed Jan 2 16:45:22 2002
@@ -64,6 +64,9 @@
#ifdef CONFIG_SGI_DS1286
extern int get_ds1286_status(char *);
#endif
+#ifdef CONFIG_X86_VISWS_APIC
+extern int get_cobalt_entries(char *);
+#endif
static int proc_calc_metrics(char *page, char **start, off_t off,
int count, int *eof, int len)
@@ -337,6 +340,15 @@
}
#endif
+#ifdef CONFIG_X86_VISWS_APIC
+static int cobalt_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len = get_cobalt_entries(page);
+ return proc_calc_metrics(page, start, off, count, eof, len);
+}
+#endif
+
static int filesystems_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
@@ -514,6 +526,9 @@
{"partitions", partitions_read_proc},
#if !defined(CONFIG_ARCH_S390)
{"interrupts", interrupts_read_proc},
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+ {"cobalt", cobalt_read_proc},
#endif
{"filesystems", filesystems_read_proc},
{"dma", dma_read_proc},
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/cobalt.h linux-2.4.17-visws/include/asm-i386/cobalt.h
--- linux-2.4.17/include/asm-i386/cobalt.h Thu Jul 26 13:41:22 2001
+++ linux-2.4.17-visws/include/asm-i386/cobalt.h Wed Dec 31 16:00:00 1969
@@ -1,117 +0,0 @@
-#include <linux/config.h>
-#ifndef __I386_COBALT_H
-#define __I386_COBALT_H
-
-/*
- * Cobalt is the system ASIC on the SGI 320 and 540 Visual Workstations
- */
-
-#define CO_CPU_PHYS 0xc2000000
-#define CO_APIC_PHYS 0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
-#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define CO_CPU_REV 0x08
-#define CO_CPU_CTRL 0x10
-#define CO_CPU_STAT 0x20
-#define CO_CPU_TIMEVAL 0x30
-
-/* CO_CPU_CTRL bits */
-#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
-#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define CO_TIME_HZ 100000000 /* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define CO_APIC_HI(n) (((n) * 0x10) + 4)
-#define CO_APIC_LO(n) ((n) * 0x10)
-#define CO_APIC_ID 0x0ffc
-
-/* CO_APIC_ID bits */
-#define CO_APIC_ENABLE 0x00000100
-
-/* CO_APIC_LO bits */
-#define CO_APIC_LEVEL 0x08000 /* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define CO_APIC_0_5_IDE0 5
-#define CO_APIC_0_5_SERIAL 13 /* XXX not really...h/w bug! */
-#define CO_APIC_0_5_PARLL 4
-#define CO_APIC_0_5_FLOPPY 6
-
-#define CO_APIC_0_6_IDE0 4
-#define CO_APIC_0_6_USB 7 /* PIIX4 USB */
-
-#define CO_APIC_1_2_IDE0 4
-
-#define CO_APIC_0_5_IDE1 2
-#define CO_APIC_0_6_IDE1 2
-
-/* XXX */
-#define CO_APIC_IDE0 CO_APIC_0_5_IDE0
-#define CO_APIC_IDE1 CO_APIC_0_5_IDE1
-#define CO_APIC_SERIAL CO_APIC_0_5_SERIAL
-/* XXX */
-
-#define CO_APIC_ENET 3 /* Lithium PCI Bridge A, Device 3 */
-#define CO_APIC_8259 12 /* serial, floppy, par-l-l, audio */
-
-#define CO_APIC_VIDOUT0 16
-#define CO_APIC_VIDOUT1 17
-#define CO_APIC_VIDIN0 18
-#define CO_APIC_VIDIN1 19
-
-#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
-
-/*
- * This is the "irq" arg to request_irq(), just a unique cookie.
- */
-#define CO_IRQ_TIMER 0
-#define CO_IRQ_ENET 3
-#define CO_IRQ_SERIAL 4
-#define CO_IRQ_FLOPPY 6 /* Same as drivers/block/floppy.c:FLOPPY_IRQ */
-#define CO_IRQ_PARLL 7
-#define CO_IRQ_POWER 9
-#define CO_IRQ_IDE 14
-#define CO_IRQ_8259 12
-
-#ifdef CONFIG_X86_VISWS_APIC
-static __inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static __inline unsigned long co_cpu_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}
-
-static __inline void co_apic_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}
-
-static __inline unsigned long co_apic_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define VISWS_320 0
-#define VISWS_540 1
-
-extern char visws_board_rev;
-
-#endif
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/hw_irq.h linux-2.4.17-visws/include/asm-i386/hw_irq.h
--- linux-2.4.17/include/asm-i386/hw_irq.h Thu Nov 22 11:46:18 2001
+++ linux-2.4.17-visws/include/asm-i386/hw_irq.h Wed Jan 2 19:50:16 2002
@@ -59,7 +59,7 @@
#define FIRST_SYSTEM_VECTOR 0xef
extern int irq_vector[NR_IRQS];
-#define IO_APIC_VECTOR(irq) irq_vector[irq]
+#define IO_APIC_VECTOR(irq) irq_vector[irq]
/*
* Various low-level irq details needed by irq.c, process.c,
@@ -80,6 +80,7 @@
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
extern void print_IO_APIC(void);
+extern int visws_get_PCI_irq_vector(int bus, int slot, int fn);
extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
extern void send_IPI(int dest, int vector);
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/lithium.h linux-2.4.17-visws/include/asm-i386/lithium.h
--- linux-2.4.17/include/asm-i386/lithium.h Thu Jul 26 13:40:32 2001
+++ linux-2.4.17-visws/include/asm-i386/lithium.h Wed Dec 31 16:00:00 1969
@@ -1,45 +0,0 @@
-#ifndef __I386_LITHIUM_H
-#define __I386_LITHIUM_H
-
-#include <linux/config.h>
-
-/*
- * Lithium is the I/O ASIC on the SGI 320 and 540 Visual Workstations
- */
-
-#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
-#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN 0x46
-
-#ifdef CONFIG_X86_VISWS_APIC
-/* More special purpose macros... */
-static __inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static __inline unsigned short li_pcia_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static __inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static __inline unsigned short li_pcib_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-#endif
-
-#endif
-
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/sgi-cobalt.h linux-2.4.17-visws/include/asm-i386/sgi-cobalt.h
--- linux-2.4.17/include/asm-i386/sgi-cobalt.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.17-visws/include/asm-i386/sgi-cobalt.h Wed Jan 2 17:19:28 2002
@@ -0,0 +1,119 @@
+#include <linux/config.h>
+#ifndef __I386_SGI_COBALT_H
+#define __I386_SGI_COBALT_H
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */
+
+#define CO_CPU_PHYS 0xc2000000
+#define CO_APIC_PHYS 0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
+#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define CO_CPU_REV 0x08
+#define CO_CPU_CTRL 0x10
+#define CO_CPU_STAT 0x20
+#define CO_CPU_TIMEVAL 0x30
+
+/* CO_CPU_CTRL bits */
+#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
+#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define CO_TIME_HZ 100000000 /* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define CO_APIC_HI(n) (((n) * 0x10) + 4)
+#define CO_APIC_LO(n) ((n) * 0x10)
+#define CO_APIC_ID 0x0ffc
+
+/* CO_APIC_ID bits */
+#define CO_APIC_ENABLE 0x00000100
+
+/* CO_APIC_LO bits */
+#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
+#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define CO_APIC_IDE0 4
+#define CO_APIC_IDE1 2 /* Only on 320 */
+
+#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
+#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
+
+#define CO_APIC_PIIX4_USB 7 /* this one is wierd */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
+#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
+
+#define CO_APIC_VIDOUT0 16
+#define CO_APIC_VIDOUT1 17
+#define CO_APIC_VIDIN0 18
+#define CO_APIC_VIDIN1 19
+
+#define CO_APIC_LI_AUDIO 22
+
+#define CO_APIC_AS 24
+#define CO_APIC_RE 25
+
+#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
+#define CO_APIC_NMI 29
+#define CO_APIC_LAST CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
+#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
+#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
+#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
+#define CO_IRQ_IDE0 14 /* knowledge of... */
+#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
+#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+extern __inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+extern __inline unsigned long co_cpu_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}
+
+extern __inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}
+
+extern __inline unsigned long co_apic_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define VISWS_320 0
+#define VISWS_540 1
+
+extern char visws_board_rev;
+
+#endif /* __I386_SGI_COBALT_H */
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/sgi-lithium.h linux-2.4.17-visws/include/asm-i386/sgi-lithium.h
--- linux-2.4.17/include/asm-i386/sgi-lithium.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.17-visws/include/asm-i386/sgi-lithium.h Wed Jan 2 17:19:28 2002
@@ -0,0 +1,56 @@
+#ifndef __I386_SGI_LITHIUM_H
+#define __I386_SGI_LITHIUM_H
+
+#include <linux/config.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
+#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN 0x46
+
+/* LI_PCI_INTENT bits */
+#define LI_INTA_0 0x0001
+#define LI_INTA_1 0x0002
+#define LI_INTA_2 0x0004
+#define LI_INTA_3 0x0008
+#define LI_INTA_4 0x0010
+#define LI_INTB 0x0020
+#define LI_INTC 0x0040
+#define LI_INTD 0x0080
+
+
+#ifdef CONFIG_X86_VISWS_APIC
+/* More special purpose macros... */
+extern __inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+extern __inline unsigned short li_pcia_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+extern __inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+extern __inline unsigned short li_pcib_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+#endif
+
+#endif
+
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/sgi-piix.h linux-2.4.17-visws/include/asm-i386/sgi-piix.h
--- linux-2.4.17/include/asm-i386/sgi-piix.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.17-visws/include/asm-i386/sgi-piix.h Wed Jan 2 16:45:27 2002
@@ -0,0 +1,113 @@
+#ifndef __I386_SGI_PIIX_H
+#define __I386_SGI_PIIX_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+/*
+ * The PCI bus with PIIX4.
+ * XXX bus numbering should be virtualized?!
+ */
+#define PIIX4_BUS 0
+
+#define PIIX_PM_START 0x0F80
+
+#define SIO_GPIO_START 0x0FC0
+
+#define SIO_PM_START 0x0FC8
+
+#define PMBASE PIIX_PM_START
+#define GPIREG0 (PMBASE+0x30)
+#define GPIREG(x) (GPIREG0+((x)/8))
+#define GPIBIT(x) (1 << ((x)%8))
+
+#define PIIX_GPI_BD_ID1 18
+#define PIIX_GPI_BD_ID2 19
+#define PIIX_GPI_BD_ID3 20
+#define PIIX_GPI_BD_ID4 21
+#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
+#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
+ GPIBIT(PIIX_GPI_BD_ID2) | \
+ GPIBIT(PIIX_GPI_BD_ID3) | \
+ GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
+
+#define SIO_INDEX 0x2e
+#define SIO_DATA 0x2f
+
+#define SIO_DEV_SEL 0x7
+#define SIO_DEV_ENB 0x30
+#define SIO_DEV_MSB 0x60
+#define SIO_DEV_LSB 0x61
+
+#define SIO_GP_DEV 0x7
+
+#define SIO_GP_BASE SIO_GPIO_START
+#define SIO_GP_MSB (SIO_GP_BASE>>8)
+#define SIO_GP_LSB (SIO_GP_BASE&0xff)
+
+#define SIO_GP_DATA1 (SIO_GP_BASE+0)
+
+#define SIO_PM_DEV 0x8
+
+#define SIO_PM_BASE SIO_PM_START
+#define SIO_PM_MSB (SIO_PM_BASE>>8)
+#define SIO_PM_LSB (SIO_PM_BASE&0xff)
+#define SIO_PM_INDEX (SIO_PM_BASE+0)
+#define SIO_PM_DATA (SIO_PM_BASE+1)
+
+#define SIO_PM_FER2 0x1
+
+#define SIO_PM_GP_EN 0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV 0xff
+#define SPECIAL_REG 0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state. PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP 0x00120002
+
+#define PIIX4_RESET_PORT 0xcf9
+#define PIIX4_RESET_VAL 0x6
+
+#define PMSTS_PORT 0xf80 // 2 bytes PM Status
+#define PMEN_PORT 0xf82 // 2 bytes PM Enable
+#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
+
+#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM (1<<15) // Resume Status
+#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
+#define PM_STS_RTC (1<<10) // RTC status
+#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
+#define PM_STS_GBL (1<<5) // Global Status
+#define PM_STS_BM (1<<4) // Bus Master Status
+#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0 (0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
+
+#endif
diff -Nuar --exclude=*~ --exclude=TAGS --exclude=*.[oas] --exclude=.* linux-2.4.17/include/asm-i386/sgi-vwdbe.h linux-2.4.17-visws/include/asm-i386/sgi-vwdbe.h
--- linux-2.4.17/include/asm-i386/sgi-vwdbe.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.17-visws/include/asm-i386/sgi-vwdbe.h Wed Jan 2 16:45:27 2002
@@ -0,0 +1,305 @@
+/*
+ * linux/asm-i386/sgi-vwdbe.h -- SGI DBE frame buffer device header
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Jeffrey Newquist, newquist@engr.sgi.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef __SGI_VWDBE_H__
+#define __SGI_VWDBE_H__
+
+#define DBE_GETREG(reg, dest) ((dest) = DBE_REG_BASE->##reg)
+#define DBE_SETREG(reg, src) DBE_REG_BASE->##reg = (src)
+#define DBE_IGETREG(reg, idx, dest) ((dest) = DBE_REG_BASE->##reg##[idx])
+#define DBE_ISETREG(reg, idx, src) (DBE_REG_BASE->##reg##[idx] = (src))
+
+#define MASK(msb, lsb) ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
+#define GET(v, msb, lsb) ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
+#define SET(v, f, msb, lsb) ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
+
+#define GET_DBE_FIELD(reg, field, v) GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+#define SET_DBE_FIELD(reg, field, v, f) SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+
+/* NOTE: All loads/stores must be 32 bits and uncached */
+
+#define DBE_REG_PHYS 0xd0000000
+#define DBE_REG_SIZE 0x01000000
+
+typedef struct {
+ volatile u32 ctrlstat; /* 0x000000 general control */
+ volatile u32 dotclock; /* 0x000004 dot clock PLL control */
+ volatile u32 i2c; /* 0x000008 crt I2C control */
+ volatile u32 sysclk; /* 0x00000c system clock PLL control */
+ volatile u32 i2cfp; /* 0x000010 flat panel I2C control */
+ volatile u32 id; /* 0x000014 device id/chip revision */
+ volatile u32 config; /* 0x000018 power on configuration */
+ volatile u32 bist; /* 0x00001c internal bist status */
+
+ char _pad0[ 0x010000 - 0x000020 ];
+
+ volatile u32 vt_xy; /* 0x010000 current dot coords */
+ volatile u32 vt_xymax; /* 0x010004 maximum dot coords */
+ volatile u32 vt_vsync; /* 0x010008 vsync on/off */
+ volatile u32 vt_hsync; /* 0x01000c hsync on/off */
+ volatile u32 vt_vblank; /* 0x010010 vblank on/off */
+ volatile u32 vt_hblank; /* 0x010014 hblank on/off */
+ volatile u32 vt_flags; /* 0x010018 polarity of vt signals */
+ volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */
+ volatile u32 vt_intr01; /* 0x010020 intr 0,1 y coords */
+ volatile u32 vt_intr23; /* 0x010024 intr 2,3 y coords */
+ volatile u32 fp_hdrv; /* 0x010028 flat panel hdrv on/off */
+ volatile u32 fp_vdrv; /* 0x01002c flat panel vdrv on/off */
+ volatile u32 fp_de; /* 0x010030 flat panel de on/off */
+ volatile u32 vt_hpixen; /* 0x010034 intrnl horiz pixel on/off*/
+ volatile u32 vt_vpixen; /* 0x010038 intrnl vert pixel on/off */
+ volatile u32 vt_hcmap; /* 0x01003c cmap write (horiz) */
+ volatile u32 vt_vcmap; /* 0x010040 cmap write (vert) */
+ volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */
+ volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */
+ volatile u32 vc_start_xy; /* 0x01004c eol/f vc/xy reset val */
+
+ char _pad1[ 0x020000 - 0x010050 ];
+
+ volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */
+ volatile u32 ovr_inhwctrl; /* 0x020004 overlay plane ctrl 1 */
+ volatile u32 ovr_control; /* 0x020008 overlay plane ctrl 1 */
+
+ char _pad2[ 0x030000 - 0x02000C ];
+
+ volatile u32 frm_size_tile; /* 0x030000 normal plane ctrl 0 */
+ volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */
+ volatile u32 frm_inhwctrl; /* 0x030008 normal plane ctrl 2 */
+ volatile u32 frm_control; /* 0x03000C normal plane ctrl 3 */
+
+ char _pad3[ 0x040000 - 0x030010 ];
+
+ volatile u32 did_inhwctrl; /* 0x040000 DID control */
+ volatile u32 did_control; /* 0x040004 DID shadow */
+
+ char _pad4[ 0x048000 - 0x040008 ];
+
+ volatile u32 mode_regs[32]; /* 0x048000 - 0x04807c WID table */
+
+ char _pad5[ 0x050000 - 0x048080 ];
+
+ volatile u32 cmap[6144]; /* 0x050000 - 0x055ffc color map */
+
+ char _pad6[ 0x058000 - 0x056000 ];
+
+ volatile u32 cm_fifo; /* 0x058000 color map fifo status */
+
+ char _pad7[ 0x060000 - 0x058004 ];
+
+ volatile u32 gmap[256]; /* 0x060000 - 0x0603fc gamma map */
+
+ char _pad8[ 0x068000 - 0x060400 ];
+
+ volatile u32 gmap10[1024]; /* 0x068000 - 0x068ffc gamma map */
+
+ char _pad9[ 0x070000 - 0x069000 ];
+
+ volatile u32 crs_pos; /* 0x070000 cusror control 0 */
+ volatile u32 crs_ctl; /* 0x070004 cusror control 1 */
+ volatile u32 crs_cmap[3]; /* 0x070008 - 0x070010 crs cmap */
+
+ char _pad10[ 0x078000 - 0x070014 ];
+
+ volatile u32 crs_glyph[64]; /* 0x078000 - 0x0780fc crs glyph */
+
+ char _pad11[ 0x080000 - 0x078100 ];
+
+ volatile u32 vc_0; /* 0x080000 video capture crtl 0 */
+ volatile u32 vc_1; /* 0x080004 video capture crtl 1 */
+ volatile u32 vc_2; /* 0x080008 video capture crtl 2 */
+ volatile u32 vc_3; /* 0x08000c video capture crtl 3 */
+ volatile u32 vc_4; /* 0x080010 video capture crtl 3 */
+ volatile u32 vc_5; /* 0x080014 video capture crtl 3 */
+ volatile u32 vc_6; /* 0x080018 video capture crtl 3 */
+ volatile u32 vc_7; /* 0x08001c video capture crtl 3 */
+ volatile u32 vc_8; /* 0x08000c video capture crtl 3 */
+} asregs;
+
+/* Bit mask information */
+
+#define DBE_CTRLSTAT_CHIPID_MSB 3
+#define DBE_CTRLSTAT_CHIPID_LSB 0
+#define DBE_CTRLSTAT_SENSE_N_MSB 4
+#define DBE_CTRLSTAT_SENSE_N_LSB 4
+#define DBE_CTRLSTAT_PCLKSEL_MSB 29
+#define DBE_CTRLSTAT_PCLKSEL_LSB 28
+
+#define DBE_DOTCLK_M_MSB 7
+#define DBE_DOTCLK_M_LSB 0
+#define DBE_DOTCLK_N_MSB 13
+#define DBE_DOTCLK_N_LSB 8
+#define DBE_DOTCLK_P_MSB 15
+#define DBE_DOTCLK_P_LSB 14
+#define DBE_DOTCLK_RUN_MSB 20
+#define DBE_DOTCLK_RUN_LSB 20
+
+#define DBE_VT_XY_VT_FREEZE_MSB 31
+#define DBE_VT_XY_VT_FREEZE_LSB 31
+
+#define DBE_FP_VDRV_FP_VDRV_ON_MSB 23
+#define DBE_FP_VDRV_FP_VDRV_ON_LSB 12
+#define DBE_FP_VDRV_FP_VDRV_OFF_MSB 11
+#define DBE_FP_VDRV_FP_VDRV_OFF_LSB 0
+
+#define DBE_FP_HDRV_FP_HDRV_ON_MSB 23
+#define DBE_FP_HDRV_FP_HDRV_ON_LSB 12
+#define DBE_FP_HDRV_FP_HDRV_OFF_MSB 11
+#define DBE_FP_HDRV_FP_HDRV_OFF_LSB 0
+
+#define DBE_FP_DE_FP_DE_ON_MSB 23
+#define DBE_FP_DE_FP_DE_ON_LSB 12
+#define DBE_FP_DE_FP_DE_OFF_MSB 11
+#define DBE_FP_DE_FP_DE_OFF_LSB 0
+
+#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB 23
+#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB 12
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB 11
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB 0
+
+#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB 23
+#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB 12
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB 11
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB 0
+
+#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB 23
+#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB 12
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB 11
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB 0
+
+#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB 23
+#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB 12
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB 11
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB 0
+
+#define DBE_VT_FLAGS_VDRV_INVERT_MSB 0
+#define DBE_VT_FLAGS_VDRV_INVERT_LSB 0
+#define DBE_VT_FLAGS_HDRV_INVERT_MSB 2
+#define DBE_VT_FLAGS_HDRV_INVERT_LSB 2
+
+#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB 23
+#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB 12
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB 11
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB 0
+
+#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB 23
+#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB 12
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB 11
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB 0
+
+#define DBE_VT_XYMAX_VT_MAXX_MSB 11
+#define DBE_VT_XYMAX_VT_MAXX_LSB 0
+#define DBE_VT_XYMAX_VT_MAXY_MSB 23
+#define DBE_VT_XYMAX_VT_MAXY_LSB 12
+
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB 23
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB 12
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB 11
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB 0
+
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB 23
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB 12
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB 11
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB 0
+
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB 0
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB 0
+
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0
+
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB 13
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB 13
+
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB 0
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB 0
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB 31
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB 9
+#define DBE_FRM_CONTROL_FRM_LINEAR_MSB 1
+#define DBE_FRM_CONTROL_FRM_LINEAR_LSB 1
+
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0
+
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB 12
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB 5
+#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB 4
+#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB 0
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB 14
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB 13
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB 15
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB 15
+
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB 31
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB 16
+
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB 0
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB 0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0
+
+#define DBE_DID_START_XY_DID_STARTY_MSB 23
+#define DBE_DID_START_XY_DID_STARTY_LSB 12
+#define DBE_DID_START_XY_DID_STARTX_MSB 11
+#define DBE_DID_START_XY_DID_STARTX_LSB 0
+
+#define DBE_CRS_START_XY_CRS_STARTY_MSB 23
+#define DBE_CRS_START_XY_CRS_STARTY_LSB 12
+#define DBE_CRS_START_XY_CRS_STARTX_MSB 11
+#define DBE_CRS_START_XY_CRS_STARTX_LSB 0
+
+#define DBE_WID_TYP_MSB 4
+#define DBE_WID_TYP_LSB 2
+#define DBE_WID_BUF_MSB 1
+#define DBE_WID_BUF_LSB 0
+
+#define DBE_VC_START_XY_VC_STARTY_MSB 23
+#define DBE_VC_START_XY_VC_STARTY_LSB 12
+#define DBE_VC_START_XY_VC_STARTX_MSB 11
+#define DBE_VC_START_XY_VC_STARTX_LSB 0
+
+/* Constants */
+
+#define DBE_FRM_DEPTH_8 0
+#define DBE_FRM_DEPTH_16 1
+#define DBE_FRM_DEPTH_32 2
+
+#define DBE_CMODE_I8 0
+#define DBE_CMODE_I12 1
+#define DBE_CMODE_RG3B2 2
+#define DBE_CMODE_RGB4 3
+#define DBE_CMODE_ARGB5 4
+#define DBE_CMODE_RGB8 5
+#define DBE_CMODE_RGBA5 6
+#define DBE_CMODE_RGB10 7
+
+#define DBE_BMODE_BOTH 3
+
+#define DBE_CRS_MAGIC 54
+
+#define DBE_CLOCK_REF_KHZ 27000
+
+/* Config Register (DBE Only) Definitions */
+
+#define DBE_CONFIG_VDAC_ENABLE 0x00000001
+#define DBE_CONFIG_VDAC_GSYNC 0x00000002
+#define DBE_CONFIG_VDAC_PBLANK 0x00000004
+#define DBE_CONFIG_FPENABLE 0x00000008
+#define DBE_CONFIG_LENDIAN 0x00000020
+#define DBE_CONFIG_TILEHIST 0x00000040
+#define DBE_CONFIG_EXT_ADDR 0x00000080
+
+#define DBE_CONFIG_FBDEV ( DBE_CONFIG_VDAC_ENABLE | \
+ DBE_CONFIG_VDAC_GSYNC | \
+ DBE_CONFIG_VDAC_PBLANK | \
+ DBE_CONFIG_LENDIAN | \
+ DBE_CONFIG_EXT_ADDR )
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/