cmd648 on Linux(2.2.16kr)

=?euc-kr?q?=C1=A4=20=C1=F8=B8=B8?= (jinmanjung@yahoo.co.kr)
Wed, 19 Dec 2001 18:57:19 +0900 (JST)


dear ~!;
its boot message.
++++++++++++++++++++++++++++++++++++++++++++++++
On PC linux 2.4.8 with CMD648
Uniform Multi-Platform E-IDE driver Revision :6.31
Ide:Assuming 33MHz system bus speed for PIO
modes;override with idebus=xx
PIIX4:IDE controller on PCI bus 00 dev f9
PIIX4:chipset revision 2
PIIX4:not 100% native mode:will probe irqs later
Ide0:BM-DMA at 0xf000-0xf007,BIOS
settings:hda:DMA,hdb:DMA
Ide1:BM-DMA at 0xf008-0xf00f,BIOS
settings:hdc:pio,hdd:DMA
CMD648:IDE controller on PCI bus 02 dev 48
PCI:Found IRQ 11 for device 02:09.0
CMD648:chipset revision 1
CMD648:not 100% native mode:will probe irqs later
Ide2:BM-DMA at 0xb400-0xb407,BIOS
settings:hde:pio,hdf:pio
Ide3:BM-DMA at 0xb408-0xb40f,BIOS settings:
hdg:pio,hdh:pio
Hda : QUANTUM FIREBALLlct10 15, ATA DISK drive
Hdb:ST315323A, ATA DISK drive
Hdd:CRD-8483B,ATAPI CD/DVD-ROM drive
Ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Ide1 at 0x170-0x177,0x376 on irq 15
Hda:29336832 sectors(15020 MB) w/418kiB
Cache,CHS=1826/255/63,UDMA(33)
Hdb:30008475 sectors(15364 MB) w/512KIB Cache
,CHS=1827/255/63,UDMA(66)
Hdd:ATAPI 48X CD_ROM drive,128kB Cache,DMA
++++++++++++++++++++++++++++++++++++++++++++++++
did my system identificate my device(pci_ide drive)?

i can't see attached hard drive .
There is not /dev/hdc and /dev/hdd.
where can i find it?
or system environment problem?
show me the way please~!
i boot it with
"ide2=0xa400,0xa802,11 ide=0xac00,0xb002,11"

/proc/interrupt
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
128 ptm
136 pts
162 raw
180 usb
226 drm

Block devices:
2 fd
3 ide0
22 ide1
/proc/cmd64x

CMD648 Chipset.
--------------- Primary Channel ----------------
Secondary Channel -------------
enabled
enabled
--------------- drive0 --------- drive1 --------
drive0 ---------- drive1 ------
DMA enabled: no no no
no
DMA Mode: PIO(?) PIO(?)
PIO(?) PIO(?)
PIO Mode: ? ? ?
?
polling
polling
clear clear
enabled
enabled
CFR = 0x40, HI = 0x04, LOW = 0x00
ARTTIM23 = 0x0c, HI = 0x00, LOW = 0x0c
MRDMODE = 0x00, HI = 0x00, LOW = 0x00

/proc/pci

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Unknown device (rev 2).
Vendor id=8086. Device id=1130.
Fast devsel. Fast back-to-back capable. Master
Capable. No bursts.
Prefetchable 32 bit memory at 0xd0000000
[0xd0000008].
Bus 0, device 1, function 0:
PCI bridge: Intel Unknown device (rev 2).
Vendor id=8086. Device id=1131.
Fast devsel. Master Capable. Latency=32. Min
Gnt=12.
Bus 0, device 30, function 0:
PCI bridge: Intel Unknown device (rev 2).
Vendor id=8086. Device id=244e.
Fast devsel. Fast back-to-back capable. Master
Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Unknown device (rev 2).
Vendor id=8086. Device id=2440.
Medium devsel. Fast back-to-back capable.
Master Capable. No bursts.
Bus 0, device 31, function 1:
IDE interface: Intel Unknown device (rev 2).
Vendor id=8086. Device id=244b.
Medium devsel. Fast back-to-back capable.
Master Capable. No bursts.
I/O at 0xf000 [0xf001].
Bus 0, device 31, function 2:
USB Controller: Intel Unknown device (rev 2).
Vendor id=8086. Device id=2442.
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. No bursts.
I/O at 0xd000 [0xd001].
Bus 0, device 31, function 3:
SM Bus: Intel Unknown device (rev 2).
Vendor id=8086. Device id=2443.
Medium devsel. Fast back-to-back capable.
I/O at 0x5000 [0x5001].
Bus 0, device 31, function 4:
USB Controller: Intel Unknown device (rev 2).
Vendor id=8086. Device id=2444.
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. No bursts.
I/O at 0xd400 [0xd401].
Bus 0, device 31, function 5:
Multimedia audio controller: Intel Unknown device
(rev 2).
Vendor id=8086. Device id=2445.
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. No bursts.
I/O at 0xd800 [0xd801].
I/O at 0xdc00 [0xdc01].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Unknown device (rev
0).
Vendor id=1002. Device id=5246.
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd4000000
[0xd4000008].
I/O at 0xc000 [0xc001].
Non-prefetchable 32 bit memory at 0xd9000000
[0xd9000000].
Bus 2, device 5, function 0:
PCI bridge: Unknown vendor Unknown device (rev
17).
Vendor id=3388. Device id=21.
Medium devsel. Fast back-to-back capable.
Master Capable. Latency=32. Min Gnt=6.
Bus 2, device 6, function 0:
Ethernet controller: Realtek 8139 (rev 16).
Medium devsel. Fast back-to-back capable. IRQ
10. Master Capable. Latency=32. Min Gnt=32.Max
Lat=64.
I/O at 0xa000 [0xa001].
Non-prefetchable 32 bit memory at 0xdb000000
[0xdb000000].
Bus 2, device 9, function 0:
RAID storage controller: CMD Unknown device (rev
1).
Vendor id=1095. Device id=648.
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. Latency=32. Min Gnt=2.Max
Lat=4.
I/O at 0xa400 [0xa401].
I/O at 0xa800 [0xa801].
I/O at 0xac00 [0xac01].
I/O at 0xb000 [0xb001].
I/O at 0xb400 [0xb401].
Bus 3, device 12, function 0:
Multimedia video controller: Brooktree Bt878 2nd
Contr. (?) (rev 17).
Medium devsel. Fast back-to-back capable. IRQ
11. Master Capable. Latency=32. Min Gnt=16.Max
Lat=40.
Prefetchable 32 bit memory at 0xdc000000
[0xdc000008].
Bus 3, device 13, function 0:
Multimedia video controller: Brooktree Bt878 2nd
Contr. (?) (rev 17).
Medium devsel. Fast back-to-back capable. IRQ
10. Master Capable. Latency=32. Min Gnt=16.Max
Lat=40.
Prefetchable 32 bit memory at 0xdc002000
[0xdc002008].

thats all..

regards...~

_____________________________________________________________________
À̹ø °Ü¿ï¹æÇп£ ¾îÇаú ÄÄÇ»ÅÍ ½Ç·ÂÀ» µÎ¹è·Î! - ¾ßÈÄ! ¹è¿òÅÍ
http://education.yahoo.co.kr/
´ëÇк° ÀԽÿ䰭, Áö¿ø°¡´É ¿¹»óÁ¡¼öÈ®ÀÎ - ¾ßÈÄ! ´ëÀÔÁ¤º¸
http://kr.jinhak.yahoo.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/