Most drivers were modified to add a 'nowayout=[01]' module parameter
which defaults to CONFIG_WATCHDOG_NOWAYOUT if not passed. wdt285.c
wasn't written to allow a way out at all, so it wasn't modified.
To the following drivers was also added a 'timeout=X' module parameter,
where timeout is specified in seconds. Only drivers for which no
similar parm was already present were modified:
advantechwdt.c (marekm@linux.org.pl)
eurotechwdt.c (giometti@ascensit.com, support@ascensit.com)
ib700wdt.c (chowes@vsol.net)
pcwd.c (kenji@bitgate.com)
wdt.c (alan@redhat.com)
wdt_pci.c (alan@redhat.com)
These already offer a timeout parm:
i810-tco.c (nils@kernelconcepts.de)
softdog.c (alan@redhat.com)
wdt285.o (pb@nexus.co.uk)
These didn't get a timeout parm because it wasn't obvious if or how it
could be done:
machzwd.c (fuganti@conectiva.com.br)
mixcomwd.c (gorgo@itc.hu, info@itc.hu)
shwdt.c (lethal@chaoticdreams.org)
wdt977.c (woody@netwinder.org)
Thanks,
Matt
-- Matt Domsch Sr. Software Engineer Dell Linux Solutions www.dell.com/linux #1 US Linux Server provider with 24% (IDC Sept 2001) #2 Worldwide Linux Server provider with 17% (IDC Sept 2001) #3 Unix provider with 18% in the US (Dataquest)!
diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/acquirewdt.c linux/drivers/char/acquirewdt.c --- linux-2.4.17-rc1/drivers/char/acquirewdt.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/acquirewdt.c Mon Dec 17 11:39:51 2001 @@ -17,6 +17,9 @@ * * (c) Copyright 1995 Alan Cox <alan@redhat.com> * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Can't add timeout - driver doesn't allow changing value */ #include <linux/config.h> @@ -50,8 +53,14 @@ static spinlock_t acq_lock; #define WDT_STOP 0x43 #define WDT_START 0x443 -#define WD_TIMO (100*60) /* 1 minute */ +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); /* * Kernel methods. @@ -126,10 +135,12 @@ static int acq_open(struct inode *inode, spin_unlock(&acq_lock); return -EBUSY; } + if (nowayout) { + MOD_INC_USE_COUNT; + } /* * Activate */ - acq_is_open=1; inb_p(WDT_START); spin_unlock(&acq_lock); @@ -145,9 +156,9 @@ static int acq_close(struct inode *inode if(MINOR(inode->i_rdev)==WATCHDOG_MINOR) { spin_lock(&acq_lock); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { inb_p(WDT_STOP); -#endif + } acq_is_open=0; spin_unlock(&acq_lock); } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/advantechwdt.c linux/drivers/char/advantechwdt.c --- linux-2.4.17-rc1/drivers/char/advantechwdt.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/advantechwdt.c Mon Dec 17 11:40:00 2001 @@ -20,6 +20,9 @@ * * (c) Copyright 1995 Alan Cox <alan@redhat.com> * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default */ #include <linux/config.h> @@ -56,8 +59,7 @@ static spinlock_t advwdt_lock; * the manual says WDT_STOP is 0x43, not 0x443). * (0x43 is also a write-only control register for the 8254 timer!) * - * TODO: module parameters to set the I/O port addresses and NOWAYOUT - * option at load time. + * TODO: module parameters to set the I/O port addresses */ #define WDT_STOP 0x443 @@ -65,6 +67,19 @@ static spinlock_t advwdt_lock; #define WD_TIMO 60 /* 1 minute */ +static int timeout = WD_TIMO; /* in seconds */ +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=60)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /* * Kernel methods. */ @@ -73,7 +88,7 @@ static void advwdt_ping(void) { /* Write a watchdog value */ - outb_p(WD_TIMO, WDT_START); + outb_p(timeout, WDT_START); } static ssize_t @@ -135,6 +150,9 @@ advwdt_open(struct inode *inode, struct spin_unlock(&advwdt_lock); return -EBUSY; } + if (nowayout) { + MOD_INC_USE_COUNT; + } /* * Activate */ @@ -154,9 +172,9 @@ advwdt_close(struct inode *inode, struct lock_kernel(); if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { spin_lock(&advwdt_lock); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { inb_p(WDT_STOP); -#endif + } advwdt_is_open = 0; spin_unlock(&advwdt_lock); } @@ -209,11 +227,21 @@ static struct notifier_block advwdt_noti 0 }; +static void __init +advwdt_validate_timeout(void) +{ + if (timeout < 1 || timeout > 63) { + timeout = WD_TIMO; + printk(KERN_INFO "advantechwdt: timeout value must be 1 <= x <= 63, using %d\n", timeout); + } +} + static int __init advwdt_init(void) { printk("WDT driver for Advantech single board computer initialising.\n"); + advwdt_validate_timeout(); spin_lock_init(&advwdt_lock); misc_register(&advwdt_miscdev); #if WDT_START != WDT_STOP diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/eurotechwdt.c linux/drivers/char/eurotechwdt.c --- linux-2.4.17-rc1/drivers/char/eurotechwdt.c Thu Oct 25 15:53:47 2001 +++ linux/drivers/char/eurotechwdt.c Mon Dec 17 11:41:11 2001 @@ -20,6 +20,10 @@ * "AS-IS" and at no charge. * * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>* + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default */ #include <linux/config.h> @@ -45,7 +49,6 @@ #include <linux/smp_lock.h> static int eurwdt_is_open; -static int eurwdt_timeout; static spinlock_t eurwdt_lock; /* @@ -58,6 +61,18 @@ static int irq = 10; static char *ev = "int"; #define WDT_TIMEOUT 60 /* 1 minute */ +static int timeout = WDT_TIMEOUT; + +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Eurotech WDT timeout in seconds (default=60)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); /* @@ -116,6 +131,15 @@ MODULE_PARM_DESC(ev, "Eurotech WDT event * Programming support */ +static void __init eurwdt_validate_timeout(void) +{ + if (timeout < 0 || timeout > 255) { + timeout = WDT_TIMEOUT; + printk(KERN_INFO "eurwdt: timeout must be 0 < x < 255, using %d\n", + timeout); + } +} + static inline void eurwdt_write_reg(u8 index, u8 data) { outb(index, io); @@ -189,7 +213,7 @@ void eurwdt_interrupt(int irq, void *dev static void eurwdt_ping(void) { /* Write the watchdog default value */ - eurwdt_set_timeout(eurwdt_timeout); + eurwdt_set_timeout(timeout); } /** @@ -263,7 +287,7 @@ static int eurwdt_ioctl(struct inode *in if (time < 0 || time > 255) return -EINVAL; - eurwdt_timeout = time; + timeout = time; eurwdt_set_timeout(time); return 0; } @@ -287,9 +311,11 @@ static int eurwdt_open(struct inode *ino spin_unlock(&eurwdt_lock); return -EBUSY; } + if (nowayout) { + MOD_INC_USE_COUNT; + } eurwdt_is_open = 1; - eurwdt_timeout = WDT_TIMEOUT; /* initial timeout */ /* Activate the WDT */ eurwdt_activate_timer(); @@ -323,14 +349,13 @@ static int eurwdt_open(struct inode *ino static int eurwdt_release(struct inode *inode, struct file *file) { if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { eurwdt_disable_timer(); -#endif + } eurwdt_is_open = 0; MOD_DEC_USE_COUNT; } - return 0; } @@ -423,6 +448,8 @@ static int __init eurwdt_init(void) { int ret; + eurwdt_validate_timeout(); + ret = misc_register(&eurwdt_miscdev); if (ret) { printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n", diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/i810-tco.c linux/drivers/char/i810-tco.c --- linux-2.4.17-rc1/drivers/char/i810-tco.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/i810-tco.c Mon Dec 17 11:41:40 2001 @@ -1,5 +1,5 @@ /* - * i810-tco 0.02: TCO timer driver for i810 chipsets + * i810-tco 0.03: TCO timer driver for i810 chipsets * * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved. * http://www.kernelconcepts.de @@ -28,6 +28,9 @@ * Initial Version 0.01 * 20000728 Nils Faerber * 0.02 Fix for SMI_EN->TCO_EN bit, some cleanups + * 20011214 Matt Domsch <Matt_Domsch@dell.com> + * 0.03 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Didn't add timeout option as i810_margin already exists. */ #include <linux/module.h> @@ -60,6 +63,18 @@ static spinlock_t tco_lock; /* Guards th static int i810_margin = TIMER_MARGIN; /* steps of 0.6sec */ MODULE_PARM (i810_margin, "i"); +MODULE_PARM_DESC(i810_margin, "Watchdog timeout in steps of 0.6sec, 2<n<64. Default = 50 (30 seconds)"); + + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /* * Timer active flag @@ -167,6 +182,9 @@ static int i810tco_open (struct inode *i if (timer_alive) return -EBUSY; + if (nowayout) { + MOD_INC_USE_COUNT; + } /* * Reload and activate timer */ @@ -181,10 +199,10 @@ static int i810tco_release (struct inode /* * Shut off the timer. */ -#ifdef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { tco_timer_stop (); timer_alive = 0; -#endif + } return 0; } @@ -342,8 +360,8 @@ static int __init watchdog_init (void) tco_timer_reload (); printk (KERN_INFO - "i810 TCO timer: V0.02, timer margin: %d sec (0x%04x)\n", - (int) (i810_margin * 6 / 10), TCOBASE); + "i810 TCO timer: V0.03, timer margin: %d sec (0x%04x), nowayout: %d\n", + (int) (i810_margin * 6 / 10), TCOBASE, nowayout); return 0; } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/ib700wdt.c linux/drivers/char/ib700wdt.c --- linux-2.4.17-rc1/drivers/char/ib700wdt.c Thu Oct 11 11:07:00 2001 +++ linux/drivers/char/ib700wdt.c Mon Dec 17 11:42:26 2001 @@ -25,6 +25,10 @@ * * (c) Copyright 1995 Alan Cox <alan@redhat.com> * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default + * */ #include <linux/config.h> @@ -92,15 +96,36 @@ static spinlock_t ibwdt_lock; #define WD_TIMO 0 /* 30 seconds +/- 20%, from table */ +static int timeout_val = WD_TIMO; /* value in table */ +static int timeout = 30; /* in seconds */ +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, 0 < n < 30, must be even (default=30)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /* * Kernel methods. */ +static void __init +ibwdt_validate_timeout(void) +{ + timeout_val = (30 - timeout) / 2; + if (timeout_val < 0 || timeout_val > 0xF) timeout_val = WD_TIMO; +} + static void ibwdt_ping(void) { /* Write a watchdog value */ - outb_p(WD_TIMO, WDT_START); + outb_p(timeout_val, WDT_START); } static ssize_t @@ -162,6 +187,9 @@ ibwdt_open(struct inode *inode, struct f spin_unlock(&ibwdt_lock); return -EBUSY; } + if (nowayout) { + MOD_INC_USE_COUNT; + } /* * Activate */ @@ -181,9 +209,9 @@ ibwdt_close(struct inode *inode, struct lock_kernel(); if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { spin_lock(&ibwdt_lock); -#ifndef CONFIG_WATCHDOG_NOWAYOUT - outb_p(WD_TIMO, WDT_STOP); -#endif + if (!nowayout) { + outb_p(timeout_val, WDT_STOP); + } ibwdt_is_open = 0; spin_unlock(&ibwdt_lock); } @@ -201,7 +229,7 @@ ibwdt_notify_sys(struct notifier_block * { if (code == SYS_DOWN || code == SYS_HALT) { /* Turn the WDT off */ - outb_p(WD_TIMO, WDT_STOP); + outb_p(timeout_val, WDT_STOP); } return NOTIFY_DONE; } @@ -241,6 +269,7 @@ ibwdt_init(void) { printk("WDT driver for IB700 single board computer initialising.\n"); + ibwdt_validate_timeout(); spin_lock_init(&ibwdt_lock); misc_register(&ibwdt_miscdev); #if WDT_START != WDT_STOP diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/machzwd.c linux/drivers/char/machzwd.c --- linux-2.4.17-rc1/drivers/char/machzwd.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/machzwd.c Mon Dec 17 11:23:31 2001 @@ -24,6 +24,8 @@ * a system RESET and it starts wd#2 that unconditionaly will RESET * the system when the counter reaches zero. * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT */ #include <linux/config.h> @@ -103,6 +105,16 @@ MODULE_LICENSE("GPL"); MODULE_PARM(action, "i"); MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + + #define PFX "machzwd" static struct watchdog_info zf_info = { @@ -307,7 +319,7 @@ static ssize_t zf_write(struct file *fil * no need to check for close confirmation * no way to disable watchdog ;) */ -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { size_t ofs; /* @@ -323,7 +335,7 @@ static ssize_t zf_write(struct file *fil dprintk("zf_expect_close 1\n"); } } -#endif + } /* * Well, anyhow someone wrote to us, * we should return that favour @@ -386,9 +398,9 @@ static int zf_open(struct inode *inode, return -EBUSY; } -#ifdef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { MOD_INC_USE_COUNT; -#endif + } zf_is_open = 1; spin_unlock(&zf_lock); diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/mixcomwd.c linux/drivers/char/mixcomwd.c --- linux-2.4.17-rc1/drivers/char/mixcomwd.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/mixcomwd.c Mon Dec 17 11:44:09 2001 @@ -28,9 +28,12 @@ * Version 0.4 (99/11/15): * - support for one more type board * + * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com> + * - added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * */ -#define VERSION "0.4" +#define VERSION "0.5" #include <linux/module.h> #include <linux/config.h> @@ -57,26 +60,30 @@ static int mixcomwd_ioports[] = { 0x180, static long mixcomwd_opened; /* long req'd for setbit --RR */ static int watchdog_port; - -#ifndef CONFIG_WATCHDOG_NOWAYOUT static int mixcomwd_timer_alive; static struct timer_list mixcomwd_timer; + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; #endif +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + static void mixcomwd_ping(void) { outb_p(55,watchdog_port); return; } -#ifndef CONFIG_WATCHDOG_NOWAYOUT static void mixcomwd_timerfun(unsigned long d) { mixcomwd_ping(); mod_timer(&mixcomwd_timer,jiffies+ 5*HZ); } -#endif /* * Allow only one person to hold it open @@ -89,12 +96,14 @@ static int mixcomwd_open(struct inode *i } mixcomwd_ping(); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { + MOD_INC_USE_COUNT; + } else { if(mixcomwd_timer_alive) { del_timer(&mixcomwd_timer); mixcomwd_timer_alive=0; } -#endif + } return 0; } @@ -102,7 +111,7 @@ static int mixcomwd_release(struct inode { lock_kernel(); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { if(mixcomwd_timer_alive) { printk(KERN_ERR "mixcomwd: release called while internal timer alive"); unlock_kernel(); @@ -114,7 +123,7 @@ static int mixcomwd_release(struct inode mixcomwd_timer.data=0; mixcomwd_timer_alive=1; add_timer(&mixcomwd_timer); -#endif + } clear_bit(0,&mixcomwd_opened); unlock_kernel(); @@ -148,9 +157,9 @@ static int mixcomwd_ioctl(struct inode * { case WDIOC_GETSTATUS: status=mixcomwd_opened; -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { status|=mixcomwd_timer_alive; -#endif + } if (copy_to_user((int *)arg, &status, sizeof(int))) { return -EFAULT; } @@ -255,14 +264,14 @@ static int __init mixcomwd_init(void) static void __exit mixcomwd_exit(void) { -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { if(mixcomwd_timer_alive) { printk(KERN_WARNING "mixcomwd: I quit now, hardware will" " probably reboot!\n"); del_timer(&mixcomwd_timer); mixcomwd_timer_alive=0; } -#endif + } release_region(watchdog_port,1); misc_deregister(&mixcomwd_miscdev); } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/pcwd.c linux/drivers/char/pcwd.c --- linux-2.4.17-rc1/drivers/char/pcwd.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/pcwd.c Mon Dec 17 11:45:36 2001 @@ -40,6 +40,8 @@ * fairly useless proc entry. * 990610 removed said useless proc code for the merge <alan> * 000403 Removed last traces of proc code. <davej> + * 011214 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com> + * Added timeout module option to override default */ #include <linux/module.h> @@ -76,7 +78,7 @@ */ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; -#define WD_VER "1.10 (06/05/99)" +#define WD_VER "1.12 (12/14/2001)" /* * It should be noted that PCWD_REVISION_B was removed because A and B @@ -88,7 +90,22 @@ static int pcwd_ioports[] = { 0x270, 0x3 #define PCWD_REVISION_A 1 #define PCWD_REVISION_C 2 -#define WD_TIMEOUT 3 /* 1 1/2 seconds for a timeout */ +#define WD_TIMEOUT 4 /* 2 seconds for a timeout */ +static int timeout_val = WD_TIMEOUT; +static int timeout = 2; + +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=2)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /* * These are the defines for the PC Watchdog card, revision A. @@ -126,7 +143,7 @@ static int __init pcwd_checkcard(void) if (prev_card_dat == 0xFF) return 0; - while(count < WD_TIMEOUT) { + while(count < timeout_val) { /* Read the raw card data from the port, and strip off the first 4 bits */ @@ -454,7 +471,7 @@ static int pcwd_close(struct inode *ino, { lock_kernel(); is_open = 0; -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { /* Disable the board */ if (revision == PCWD_REVISION_C) { spin_lock(&io_lock); @@ -462,7 +479,7 @@ static int pcwd_close(struct inode *ino, outb_p(0xA5, current_readport + 3); spin_unlock(&io_lock); } -#endif + } unlock_kernel(); } return 0; @@ -564,9 +581,15 @@ static struct miscdevice temp_miscdev = &pcwd_fops }; +static void __init pcwd_validate_timeout(void) +{ + timeout_val = timeout * 2; +} + static int __init pcwatchdog_init(void) { int i, found = 0; + pcwd_validate_timeout(); spin_lock_init(&io_lock); revision = PCWD_REVISION_A; diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/sbc60xxwdt.c linux/drivers/char/sbc60xxwdt.c --- linux-2.4.17-rc1/drivers/char/sbc60xxwdt.c Thu Sep 13 17:21:32 2001 +++ linux/drivers/char/sbc60xxwdt.c Mon Dec 17 11:45:54 2001 @@ -109,6 +109,15 @@ static unsigned long next_heartbeat; static int wdt_is_open; static int wdt_expect_close; +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /* * Whack the dog */ @@ -202,6 +211,9 @@ static int fop_open(struct inode * inode /* Just in case we're already talking to someone... */ if(wdt_is_open) return -EBUSY; + if (nowayout) { + MOD_INC_USE_COUNT; + } /* Good, fire up the show */ wdt_is_open = 1; wdt_startup(); @@ -217,7 +229,7 @@ static int fop_close(struct inode * inod lock_kernel(); if(MINOR(inode->i_rdev) == WATCHDOG_MINOR) { - if(wdt_expect_close) + if(wdt_expect_close && !nowayout) wdt_turnoff(); else { del_timer(&timer); diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/shwdt.c linux/drivers/char/shwdt.c --- linux-2.4.17-rc1/drivers/char/shwdt.c Mon Oct 15 15:36:48 2001 +++ linux/drivers/char/shwdt.c Mon Dec 17 11:46:24 2001 @@ -9,6 +9,9 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT */ #include <linux/config.h> @@ -61,6 +64,15 @@ static int sh_is_open = 0; static struct watchdog_info sh_wdt_info; +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + /** * sh_wdt_write_cnt - Write to Counter * @@ -137,6 +149,9 @@ static int sh_wdt_open(struct inode *ino if (sh_is_open) { return -EBUSY; } + if (nowayout) { + MOD_INC_USE_COUNT; + } sh_is_open = 1; sh_wdt_start(); @@ -162,9 +177,9 @@ static int sh_wdt_close(struct inode *in lock_kernel(); if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { sh_wdt_stop(); -#endif + } sh_is_open = 0; } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/softdog.c linux/drivers/char/softdog.c --- linux-2.4.17-rc1/drivers/char/softdog.c Sun Sep 30 14:26:05 2001 +++ linux/drivers/char/softdog.c Mon Dec 17 10:12:29 2001 @@ -1,5 +1,5 @@ /* - * SoftDog 0.05: A Software Watchdog Device + * SoftDog 0.06: A Software Watchdog Device * * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. * http://www.redhat.com @@ -26,6 +26,10 @@ * * 19980911 Alan Cox * Made SMP safe for 2.3.x + * + * 20011214 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Didn't add timeout option, as soft_margin option already exists. */ #include <linux/module.h> @@ -46,6 +50,15 @@ static int soft_margin = TIMER_MARGIN; /* in seconds */ MODULE_PARM(soft_margin,"i"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); MODULE_LICENSE("GPL"); /* @@ -83,9 +96,9 @@ static int softdog_open(struct inode *in { if(timer_alive) return -EBUSY; -#ifdef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { MOD_INC_USE_COUNT; -#endif + } /* * Activate timer */ @@ -98,12 +111,12 @@ static int softdog_release(struct inode { /* * Shut off the timer. - * Lock it in if it's a module and we defined ...NOWAYOUT + * Lock it in if it's a module and we set nowayout */ lock_kernel(); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if(!nowayout) { del_timer(&watchdog_ticktock); -#endif + } timer_alive=0; unlock_kernel(); return 0; @@ -161,7 +174,7 @@ static struct miscdevice softdog_miscdev fops: &softdog_fops, }; -static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.05, timer margin: %d sec\n"; +static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.06, soft_margin: %d sec, nowayout: %d\n"; static int __init watchdog_init(void) { @@ -172,7 +185,7 @@ static int __init watchdog_init(void) if (ret) return ret; - printk(banner, soft_margin); + printk(banner, soft_margin, nowayout); return 0; } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/wdt.c linux/drivers/char/wdt.c --- linux-2.4.17-rc1/drivers/char/wdt.c Fri Sep 7 11:28:38 2001 +++ linux/drivers/char/wdt.c Mon Dec 17 11:47:30 2001 @@ -15,7 +15,7 @@ * * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * - * Release 0.08. + * Release 0.09. * * Fixes * Dave Gregorich : Modularisation and minor bugs @@ -27,6 +27,7 @@ * Tim Hockin : Added insmod parameters, comment cleanup * Parameterized timeout * Tigran Aivazian : Restructured wdt_init() to handle failures + * Matt Domsch : added nowayout and timeout module options */ #include <linux/config.h> @@ -62,6 +63,26 @@ static int irq=11; #define WD_TIMO (100*60) /* 1 minute */ +static int timeout_val = WD_TIMO; /* value passed to card */ +static int timeout = 60; /* in seconds */ +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=60)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +static void __init +wdt_validate_timeout(void) +{ + timeout_val = timeout * 100; +} + #ifndef MODULE /** @@ -216,7 +237,7 @@ static void wdt_ping(void) /* Write a watchdog value */ inb_p(WDT_DC); wdt_ctr_mode(1,2); - wdt_ctr_load(1,WD_TIMO); /* Timeout */ + wdt_ctr_load(1,timeout_val); /* Timeout */ outb_p(0, WDT_DC); } @@ -339,6 +360,9 @@ static int wdt_open(struct inode *inode, case WATCHDOG_MINOR: if(wdt_is_open) return -EBUSY; + if (nowayout) { + MOD_INC_USE_COUNT; + } /* * Activate */ @@ -349,7 +373,7 @@ static int wdt_open(struct inode *inode, wdt_ctr_mode(1,2); wdt_ctr_mode(2,0); wdt_ctr_load(0, 8948); /* count at 100Hz */ - wdt_ctr_load(1,WD_TIMO); /* Timeout 120 seconds */ + wdt_ctr_load(1,timeout_val); /* Timeout */ wdt_ctr_load(2,65535); outb_p(0, WDT_DC); /* Enable */ return 0; @@ -377,10 +401,10 @@ static int wdt_release(struct inode *ino lock_kernel(); if(MINOR(inode->i_rdev)==WATCHDOG_MINOR) { -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { inb_p(WDT_DC); /* Disable counters */ wdt_ctr_load(2,0); /* 0 length reset pulses now */ -#endif + } wdt_is_open=0; } unlock_kernel(); @@ -487,6 +511,7 @@ static int __init wdt_init(void) { int ret; + wdt_validate_timeout(); ret = misc_register(&wdt_miscdev); if (ret) { printk(KERN_ERR "wdt: can't misc_register on minor=%d\n", WATCHDOG_MINOR); diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/wdt977.c linux/drivers/char/wdt977.c --- linux-2.4.17-rc1/drivers/char/wdt977.c Fri Sep 7 11:28:38 2001 +++ linux/drivers/char/wdt977.c Fri Dec 14 16:15:45 2001 @@ -1,5 +1,5 @@ /* - * Wdt977 0.01: A Watchdog Device for Netwinder W83977AF chip + * Wdt977 0.02: A Watchdog Device for Netwinder W83977AF chip * * (c) Copyright 1998 Rebel.com (Woody Suwalski <woody@netwinder.org>) * @@ -11,6 +11,8 @@ * 2 of the License, or (at your option) any later version. * * ----------------------- + * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT */ #include <linux/module.h> @@ -32,6 +34,16 @@ static int timeout = 3; static int timer_alive; static int testmode; +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + + /* * Allow only one person to hold it open */ @@ -40,9 +52,9 @@ static int wdt977_open(struct inode *ino { if(timer_alive) return -EBUSY; -#ifdef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { MOD_INC_USE_COUNT; -#endif + } timer_alive++; //max timeout value = 255 minutes (0xFF). Write 0 to disable WatchDog. @@ -89,9 +101,9 @@ static int wdt977_release(struct inode * { /* * Shut off the timer. - * Lock it in if it's a module and we defined ...NOWAYOUT + * Lock it in if it's a module and we set nowayout */ -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { lock_kernel(); // unlock the SuperIO chip @@ -127,7 +139,7 @@ static int wdt977_release(struct inode * unlock_kernel(); printk(KERN_INFO "Watchdog: shutdown.\n"); -#endif + } return 0; } diff -burNp --exclude-from=/home/mdomsch/excludes linux-2.4.17-rc1/drivers/char/wdt_pci.c linux/drivers/char/wdt_pci.c --- linux-2.4.17-rc1/drivers/char/wdt_pci.c Fri Sep 7 11:28:38 2001 +++ linux/drivers/char/wdt_pci.c Mon Dec 17 11:37:08 2001 @@ -15,7 +15,7 @@ * * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * - * Release 0.08. + * Release 0.09. * * Fixes * Dave Gregorich : Modularisation and minor bugs @@ -30,6 +30,7 @@ * Alan Cox : Split ISA and PCI cards into two drivers * Jeff Garzik : PCI cleanups * Tigran Aivazian : Restructured wdtpci_init_one() to handle failures + * Matt Domsch : added nowayout and timeout module options */ #include <linux/config.h> @@ -83,6 +84,26 @@ static int irq=11; #define WD_TIMO (100*60) /* 1 minute */ +static int timeout_val = WD_TIMO; /* value passed to card */ +static int timeout = 60; /* in seconds */ +MODULE_PARM(timeout,"i"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=60)"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +static int nowayout = 1; +#else +static int nowayout = 0; +#endif + +MODULE_PARM(nowayout,"i"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +static void __init +wdtpci_validate_timeout(void) +{ + timeout_val = timeout * 100; +} + #ifndef MODULE /** @@ -232,7 +253,7 @@ static void wdtpci_ping(void) /* Write a watchdog value */ inb_p(WDT_DC); wdtpci_ctr_mode(1,2); - wdtpci_ctr_load(1,WD_TIMO); /* Timeout */ + wdtpci_ctr_load(1,timeout_val); /* Timeout */ outb_p(0, WDT_DC); } @@ -355,9 +376,9 @@ static int wdtpci_open(struct inode *ino case WATCHDOG_MINOR: if(wdt_is_open) return -EBUSY; -#ifdef CONFIG_WATCHDOG_NOWAYOUT + if (nowayout) { MOD_INC_USE_COUNT; -#endif + } /* * Activate */ @@ -385,7 +406,7 @@ static int wdtpci_open(struct inode *ino wdtpci_ctr_mode(1,2); wdtpci_ctr_mode(2,1); wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,WD_TIMO);/* Timeout 60 seconds */ + wdtpci_ctr_load(1,timeout_val); /* Timeout */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ outb_p(0, WDT_DC); /* Enable */ return 0; @@ -413,10 +434,10 @@ static int wdtpci_release(struct inode * if(MINOR(inode->i_rdev)==WATCHDOG_MINOR) { lock_kernel(); -#ifndef CONFIG_WATCHDOG_NOWAYOUT + if (!nowayout) { inb_p(WDT_DC); /* Disable counters */ wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ -#endif + } wdt_is_open=0; unlock_kernel(); } @@ -620,6 +641,8 @@ static int __init wdtpci_init(void) if (rc < 1) return -ENODEV; + wdtpci_validate_timeout(); + return 0; }
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/