Re: 2.4.17-pre7: Oops with Tulip
Stephan von Krawczynski (skraw@ithnet.com)
Tue, 11 Dec 2001 03:40:45 +0100
Hi Jeff,
this is a story regarding tulip-driver in a two separate cards-setup
where the driver thinks it is a multiple board setup, but the
eeprom-values do not back this theory. This seems the reason, why
last_ee_data turns out as NULL and its members get references later
on, which obviously breaks.
I fixed this with the patch on the very end of this, but am not 100%
sure if this is valid and does not break other setups.
Can you comment/verify/submit the bugfix-patch to marcelo and L for
inclusion?
Thanks,
Stephan
> It works! :)
>
> Here is 2.4.17-pre7 with your tulip patch when I modprobe the tulip
> driver:
>
> Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
> PCI: Found IRQ 9 for device 00:09.0
> PCI: Setting latency timer of device 00:09.0 to 64
> tulip0: EEPROM default media type Autosense.
> tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
> block.
> tulip0: Index #1 - Media 10baseT (#0) described by a 21140 non-MII
(0)
> block.
> tulip0: Index #2 - Media 100baseTx (#3) described by a 21140
non-MII (0)
> block.
> tulip0: Index #3 - Media 10baseT-FDX (#4) described by a 21140
non-MII
> (0) block.
> tulip0: Index #4 - Media 100baseTx-FDX (#5) described by a 21140
non-MII
> (0) block.
> tulip0: MII transceiver #1 config 3100 status 7809 advertising
05e1.
> eth1: Davicom DM9102/DM9102A rev 32 at 0xb800, 00:E0:3F:04:58:60,
IRQ 9.
> PCI: Enabling device 00:0b.0 (0080 -> 0083)
> PCI: Assigned IRQ 9 for device 00:0b.0
> PCI: Setting latency timer of device 00:0b.0 to 64
> tulip1: Controller 1 of multiport board.
> tulip1: EEPROM default media type Autosense.
> tulip1: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
> block.
> tulip1: Index #1 - Media 10baseT (#0) described by a <unknown>
(128)
> block.
> tulip1: Index #2 - Media 10baseT (#0) described by a 21140 non-MII
(0)
> block.
> tulip1: Index #3 - Media 10base2 (#1) described by a 21140 non-MII
(0)
> block.
> tulip1: Index #4 - Media 10baseT-FDX (#4) described by a 21140
non-MII
> (0) block.
> tulip1: Index #5 - Media 100baseTx-FDX (#5) described by a 21140
non-MII
> (0) block.
> tulip1: ***WARNING***: No MII transceiver found!
> eth2: Macronix 98713 PMAC rev 0 at 0xff00, EEPROM not present,
> 00:E0:3F:04:58:61, IRQ 9.
>
> In other words, it works :)
>
> If I swap the cards in their PCI slots now, modprobing tulip gives
this:
> Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
> PCI: Found IRQ 9 for device 00:09.0
> PCI: Setting latency timer of device 00:09.0 to 64
> tulip0: EEPROM default media type 100baseTx.
> tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII
(0)
> block.
> tulip0: Index #1 - Media 100baseTx (#3) described by a 21140
non-MII (0)
> block.
> tulip0: Index #2 - Media 10baseT-FDX (#4) described by a 21140
non-MII
> (0) block.
> tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21140
non-MII
> (0) block.
> eth1: Macronix 98713 PMAC rev 0 at 0xb800, 00:40:33:9A:B3:20, IRQ 9.
> PCI: Found IRQ 9 for device 00:0b.0
> PCI: Setting latency timer of device 00:0b.0 to 64
> tulip1: EEPROM default media type Autosense.
> tulip1: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
> block.
> tulip1: Index #1 - Media 10baseT (#0) described by a 21140 non-MII
(0)
> block.
> tulip1: Index #2 - Media 100baseTx (#3) described by a 21140
non-MII (0)
> block.
> tulip1: Index #3 - Media 10baseT-FDX (#4) described by a 21140
non-MII
> (0) block.
> tulip1: Index #4 - Media 100baseTx-FDX (#5) described by a 21140
non-MII
> (0) block.
> tulip1: MII transceiver #1 config 3100 status 7809 advertising
05e1.
> eth2: Davicom DM9102/DM9102A rev 32 at 0xb000, 00:E0:3F:04:58:60,
IRQ 9.
>
> Can we get this to go into 2.4.17-rc1?
>
> --
> Burton Windle burton@fint.org
> Linux: the "grim reaper of innocent orphaned children."
> from /usr/src/linux-2.4.0/init/main.c:655
>
>
> On Mon, 10 Dec 2001, Stephan von Krawczynski wrote:
>
> > On Mon, 10 Dec 2001 01:08:28 -0500 (EST)
> > Burton W <bwindle@fint.org> wrote:
> >
> > Just to test a theory: please try attached patch.
> >
> > Regards,
> > Stephan
> >
> > --- eeprom.c-orig Mon Dec 10 14:24:35 2001
> > +++ eeprom.c Mon Dec 10 14:25:41 2001
> > @@ -130,9 +130,9 @@
> > }
> >
> > controller_index = 0;
> > - if (ee_data[19] > 1) { /* Multiport board. */
> > - last_ee_data = ee_data;
> > - }
> > +
> > + last_ee_data = ee_data;
> > +
> > subsequent_board:
> >
> > if (ee_data[27] == 0) { /* No valid media table.
*/
> > -
> > To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
> >
>
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/