Re: [PATCH] - 2.4.16 ns83820 optical support (Netgear GA621)

[Rob Myers]

On Wed, 2001-12-05 at 09:37, Michael Clark wrote:
> Problem solved. New patch attached.

ns83820-optical-0.13c.patch works, too.  although you forgot to bump the
version letter to c. ;)  the versions in the dmesg output below are
correct.  (i tested the p2b-d with v0.13c and the cur-dls with v0.13b)

i wonder what implications there are that its trying to do 64bit pci on
the p2b-d board?

thanks again michael, jeff, and ben!

rob.

asus p2b-d dmesg output: (32bit pci slot / redhat 7.2 / 2.4.9 stock
kernel)
eth1: enabling 64 bit PCI.
eth1: enabling optical transceiver
eth1: ns83820.c v0.13c: DP83820 00:40:f4:29:ea:d7 pciaddr=0xe1000000
irq=12 rev 0x103
eth1: link now 1000F mbps, full duplex and up.

asus p2b-d dmesg output: (same 32bit pci slot / 2.4.16)
eth1: enabling 64 bit PCI.
eth1: enabling optical transceiver
eth1: ns83820.c v0.13c: DP83820 00:40:f4:29:ea:d7 pciaddr=0xe1000000
irq=12 rev 0x103
eth1: link now 1000F mbps, full duplex and up.

tyan cur-dls dmesg output: (64bit pci slot / 2.4.16)
eth2: enabling 64 bit PCI.
eth2: enabling optical transceiver
eth2: ns83820.c v0.13b: DP83820 00:40:f4:29:ea:d7 pciaddr=0xf8800000
irq=21 rev 0x103
eth2: link now 1000F mbps, full duplex and up.

tyan cur-dls dmesg output: (32bit pci slot / 2.4.16)
eth2: disabling 64 bit PCI.
eth2: enabling optical transceiver
eth2: ns83820.c v0.13b: DP83820 00:40:f4:29:ea:d7 pciaddr=0xfc000000
irq=17 rev 0x103
eth2: link now 1000F mbps, full duplex and up.