> Well, your second version of the file had the merge done right (my code
> didn't include S/PDIF support or PM support, so those parts were
> different, but the parts that were the same as my code were done
> correctly). I'm attaching a patch that bumps the code from your 0.05b
> to a unified 0.06 and I'm also placing the 0.06 i810_audio.c.gz file on
> my web site in the same place that I put the 0.05 version. If people
> could please test this and report problems back, I would like to get
> this one off my plate (aka, I don't want to hear any more about artsd
> not working ever again so I want testers to tell me that it's fixed ;-)
Umh, problems ->
modprobe produced an oops (17-pre2), module is left in init state :
# lsmod
Module Size Used by
i810_audio 19472 1 (initializing)
ac97_codec 9632 0 [i810_audio]
Intel 810 + AC97 Audio, version 0.06, 15:21:16 Dec 4 2001
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xef00 and 0xe800, IRQ 9
i810_audio: Audio Controller supports 6 channels.
ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
# ksymoops < oops0
ksymoops 2.4.1 on i686 2.4.17-pre2-mzg2. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.17-pre2-mzg2/ (default)
-m /boot/System.map-2.4.17-pre2-mzg2 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
cpu: 0, clocks: 1329057, slice: 664528
ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
CPU: 0
EIP: 0010:[<d08f944e>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 14244000 ebx: 00000000 ecx: 18000004 edx: 00000000
esi: cfe07880 edi: cfe077b0 ebp: 00000000 esp: ce817e90
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 727, stackpage=ce817000)
Stack: 00000000 cfe07780 0000009c cfe0781c cfea2400 d08fc761 cfe07780 0000bb80
00000180 d08fc60f d08fda60 cfe077b0 cfe07780 cfd96800 d08fd930 cfd96800
d08fd0c7 cfea2400 d08fcc17 d08fd998 d08fdac0 cfea2400 00000000 c01aa55c
Call Trace: [<d08fc761>] [<d08fc60f>] [<d08fda60>] [<d08fd930>] [<d08fd0c7>]
[<d08fcc17>] [<d08fd998>] [<d08fdac0>] [<c01aa55c>] [<d08fd998>] [<d08fdac0>]
[<c01aa5c2>] [<d08fdac0>] [<d08fcd94>] [<d08fdac0>] [<d08fd740>] [<c0117f25>]
[<d08fdbd8>] [<d08f9060>] [<c0106f1b>]
Code: f7 35 28 d9 8f d0 89 07 8b 07 59 5b 5e 5f 5d c3 89 f6 55 57
>>EIP; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0> <=====
Trace; d08fc761 <[i810_audio]i810_configure_clocking+c1/2c0>
Trace; d08fc60f <[i810_audio]i810_ac97_init+2bf/350>
Trace; d08fda60 <[i810_audio]i810_mixer_fops+0/60>
Trace; d08fd930 <[i810_audio]card_names+0/14>
Trace; d08fd0c7 <[i810_audio].rodata.end+c/11>
Trace; d08fcc17 <[i810_audio]i810_probe+2b7/360>
Trace; d08fd998 <[i810_audio]i810_pci_tbl+54/a8>
Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
Trace; c01aa55c <pci_announce_device+3c/60>
Trace; d08fd998 <[i810_audio]i810_pci_tbl+54/a8>
Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
Trace; c01aa5c2 <pci_register_driver+42/60>
Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
Trace; d08fcd94 <[i810_audio]i810_init_module+24/a0>
Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
Trace; d08fd740 <[i810_audio].LC31+28/40>
Trace; c0117f25 <sys_init_module+555/630>
Trace; d08fdbd8 <.data.end+d9/????>
Trace; d08f9060 <[i810_audio]i810_alloc_pcm_channel+0/4>
Trace; c0106f1b <system_call+33/38>
Code; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0>
00000000 <_EIP>:
Code; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0> <=====
0: f7 35 28 d9 8f d0 div 0xd08fd928,%eax <=====
Code; d08f9454 <[i810_audio]i810_set_dac_rate+a4/b0>
6: 89 07 mov %eax,(%edi)
Code; d08f9456 <[i810_audio]i810_set_dac_rate+a6/b0>
8: 8b 07 mov (%edi),%eax
Code; d08f9458 <[i810_audio]i810_set_dac_rate+a8/b0>
a: 59 pop %ecx
Code; d08f9459 <[i810_audio]i810_set_dac_rate+a9/b0>
b: 5b pop %ebx
Code; d08f945a <[i810_audio]i810_set_dac_rate+aa/b0>
c: 5e pop %esi
Code; d08f945b <[i810_audio]i810_set_dac_rate+ab/b0>
d: 5f pop %edi
Code; d08f945c <[i810_audio]i810_set_dac_rate+ac/b0>
e: 5d pop %ebp
Code; d08f945d <[i810_audio]i810_set_dac_rate+ad/b0>
f: c3 ret
Code; d08f945e <[i810_audio]i810_set_dac_rate+ae/b0>
10: 89 f6 mov %esi,%esi
Code; d08f9460 <[i810_audio]i810_set_adc_rate+0/b0>
12: 55 push %ebp
Code; d08f9461 <[i810_audio]i810_set_adc_rate+1/b0>
13: 57 push %edi
1 warning issued. Results may not be reliable.
-- Mario Mikočević (Mozgy) mozgy at hinet dot hr My favourite FUBAR ... - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/