Oops! I did it! It appears that PIT interrupt requests are somehow
involved in the NMI generation. Since the high-res-timers patch
programs the PIT to interrupt once at the end of each PIT interrupt, it
stops interrupting if the interrupt system is off. At least this
appears to be the problem. Now if someone could explain just how this
is done, or at least point me to the the appropriate documentation...
So, sorry for the noise, but still, I think the patch below is a good
thing(tm).
George
>
> IMHO the check_nmi_watchdog() test is flawed in that it explicitly
> enables interrupts prior to the test. Below is a patch to fix this
> issue. When this patch is applied to the 2.4.2 kernel, the test works
> correctly, however, 2.4.7 and above all report "NMI appears to be
> stuck". (Note, the check_nmi_watchdog() code is in io_apic.c in the
> 2.4.2 kernel and is called "nmi_irq_works()".)
>
> Note that this is not just a testing issue, NMI is no longer pulling the
> system out of deadlocks with any of the irq spinlocks.
>
> I am afraid that I don't know enough or have the right documentation to
> figure out what changed, but it appears that the change was about the
> same time that the nmi.c module was introduced.
>
> Here is the recommended patch for nmi.c:
>
> --- linux-2.4.13-org/arch/i386/kernel/nmi.c Tue Sep 25 00:34:57 2001
> +++ linux/arch/i386/kernel/nmi.c Fri Nov 30 00:31:03 2001
> @@ -46,28 +54,30 @@
> int __init check_nmi_watchdog (void)
> {
> irq_cpustat_t tmp[NR_CPUS];
> - int j, cpu;
> + int j, cpu, err = 0;
>
> printk(KERN_INFO "testing NMI watchdog ... ");
>
> memcpy(tmp, irq_stat, sizeof(tmp));
> - sti();
> + cli();
> mdelay((10*1000)/nmi_hz); // wait 10 ticks
>
> for (j = 0; j < smp_num_cpus; j++) {
> cpu = cpu_logical_map(j);
> if (nmi_count(cpu) - tmp[cpu].__nmi_count <= 5) {
> printk("CPU#%d: NMI appears to be stuck!\n", cpu);
> - return -1;
> + err = -1;
> }
> }
> - printk("OK.\n");
> + if (! err ){
> + printk("OK.\n");
> + }
>
> /* now that we know it works we can reduce NMI frequency to
> something more reasonable; makes a difference in some configs */
> if (nmi_watchdog == NMI_LOCAL_APIC)
> nmi_hz = 1;
> -
> + sti();
> return 0;
> }
>
>
> --
> George george@mvista.com
> High-res-timers: http://sourceforge.net/projects/high-res-timers/
> Real time sched: http://sourceforge.net/projects/rtsched/
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-- George george@mvista.com High-res-timers: http://sourceforge.net/projects/high-res-timers/ Real time sched: http://sourceforge.net/projects/rtsched/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/