Re: netgear ga621 / ns83820

[Jason Holmes]

Sure, I have it up using the netgear driver version 1.02 on 2.4.16.  I
didn't have any problems with compiling the driver against 2.4.16 with
the same options that you list.  Previous to this it was working fine on
2.4.11-pre6.  The only obvious difference I can see is that you are
using modversions and I am not.

--
Jason Holmes

Rob Myers wrote:
> 
> hello
> 
> im having trouble with a netgear ga621, which is a fiber gigabit card
> that uses the ns83820 chipset [1].  currently i am using kernel
> 2.4.9+XFS and the netgear provided driver.  i would like to switch to
> 2.4.16, but the netgear driver does not compile.  i presume the problems
> with that driver are due to the mm changes in 2.4.10.[2]  while the
> ns83820 driver seems to load properly the card does not seem to be able
> to communicate with the switch [3].  tcpdump does not show any traffic
> being recieved by the card.
> 
> am i wrong in thinking that the ns83820 driver in 2.4.16 should support
> this card?
> 
> has anyone else had any success making this card work with the netgear
> driver since 2.4.10?
> 
> thanks and any help/education appreciated
> 
> rob.
> 
> [1] output of lspci:
> 01:0a.0 Ethernet controller: National Semiconductor Corporation: Unknown
> device 0022
>         Subsystem: Netgear: Unknown device 621a
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>         Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32, cache line size 08
>         Interrupt: pin A routed to IRQ 21
>         Region 0: I/O ports at cc00 [size=256]
>         Region 1: Memory at feb00000 (32-bit, non-prefetchable)
> [size=4K]
>         Expansion ROM at fe800000 [disabled] [size=64K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> [2] netgear driver compilation errors:
> kgcc -D__KERNEL__ -D__SMP__ -DMODULE -DCLONE -D__NO_VERSION__ -D_DUMP
> -DSINGLE_PACKET -D_GA621_ -DINTR_HOLDOFF -DMEMMAPPED_IO -D_DBG
> -DPHY_INTR -DFAILURE_MESSAGES -DSTATISTICS -DASSERTION -DCHECKSUM
> -DERRDEBUG -O -Wall -I/usr/src/linux/include -g -w  sp.c
> /usr/src/linux/include/asm/pgalloc.h: In function `get_pgd_fast':
> In file included from /usr/src/linux/include/linux/highmem.h:5,
>                  from /usr/src/linux/include/linux/skbuff.h:27,
>                  from /usr/src/linux/include/linux/netdevice.h:146,
>                  from nsmtypes.h:22,
>                  from sp.c:18:
> /usr/src/linux/include/asm/pgalloc.h:68: `cpu_data_Rsmp_d3b73c3c'
> undeclared (first use in this function)
> /usr/src/linux/include/asm/pgalloc.h:68: (Each undeclared identifier is
> reported only once
> /usr/src/linux/include/asm/pgalloc.h:68: for each function it appears
> in.)
> /usr/src/linux/include/asm/pgalloc.h: In function `free_pgd_fast':
> /usr/src/linux/include/asm/pgalloc.h:79: `cpu_data_Rsmp_d3b73c3c'
> undeclared (first use in this function)
> /usr/src/linux/include/asm/pgalloc.h: In function `pte_alloc_one_fast':
> /usr/src/linux/include/asm/pgalloc.h:111: `cpu_data_Rsmp_d3b73c3c'
> undeclared (first use in this function)
> /usr/src/linux/include/asm/pgalloc.h: In function `pte_free_fast':
> /usr/src/linux/include/asm/pgalloc.h:121: `cpu_data_Rsmp_d3b73c3c'
> undeclared (first use in this function)
> 
> [3]ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
> eth%d: enabling 64 bit PCI.
> eth1: ns83820.c v0.13: DP83820 00:40:f4:29:e9:ef pciaddr=0xfeb00000
> irq=21 rev 0x103
> eth1: link now 1000(?) mbps, full duplex and up.
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/