Re: Question: Adaptec AIC7xxx support

[John Gluck]

Hi Justin

Thanks much that really cleared it up for me.

John

"Justin T. Gibbs" wrote:

> >Hi
> >
> >I configuring the kernel, there is a option "Build adapter firmware with
> >Kernel build".
>
> There should be.  This comment has been in my distributed patches for
> Configure.help for some time:
>
> Build Adapter Firmware with Kernel Build
> CONFIG_AIC7XXX_BUILD_FIRMWARE
>   This option should only be enabled if you are modifying the
>   firmware source to the aic7xxx driver and wish to have the
>   generated firmware include files updated during a normal
>   kernel build.  The assembler for the firmware requires
>   lex and yacc or their equivalents, as well as the db v1
>   library.  You may have to install additional packages or
>   modify the assembler make file or the files it includes
>   if your build environment is different than that of the
>   author.
>
> I guess it didn't make it in with the rest of the 6.2.4 driver.
>
> >There is no help for this. It's obvious that it build
> >firmware but is it installed in the adapter automagically ???
>
> Firmware is always downloaded by the driver during card initialization.
> As noted above, only someone working on the firmware should need to
> recompile it.
>
> >I also wonder why the reset delay is 15000 Msec. It used to be 5000
> >Msec. I've usually set it to that without nasty results. I just wonder
> >what the reasoning is behind such a long delay.
>
> Some devices require it.  The default should be long enough to accomodate
> all configurations.  If you can use something shorter, feel free to
> reconfig your kernel that way.
>
> --
> Justin
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/