Re: 3c59x:command 0x3002 did not complete! Status=0xffff

[Harald Dunkel]

Tim Walberg wrote:
> 
> Is the NIC sharing interrupts or I/O ports with
> the SCSI HBAs?
> 

Nope:

  Bus  0, device  10, function  0:
    SCSI storage controller: Adaptec 7899A (rev 1).
      IRQ 15.
      Master Capable.  Latency=32.  Min Gnt=40.Max Lat=25.
      I/O at 0xa000 [0xa0ff].
      Non-prefetchable 64 bit memory at 0xd5000000 [0xd5000fff].
  Bus  0, device  10, function  1:
    SCSI storage controller: Adaptec 7899A (#2) (rev 1).
      IRQ 9.
      Master Capable.  Latency=32.  Min Gnt=40.Max Lat=25.
      I/O at 0x9800 [0x98ff].
      Non-prefetchable 64 bit memory at 0xd4800000 [0xd4800fff].
  Bus  0, device  11, function  0:
    Ethernet controller: 3Com Corporation 3c900 Combo [Boomerang] (rev 0).
      IRQ 10.
      Master Capable.  Latency=32.  Min Gnt=3.Max Lat=8.
      I/O at 0x9400 [0x943f].

The SCSI controller is an Adaptec 39160, so it allocates 2 IRQs, 2 I/Os,
etc.

Regards

Harri