Re: PCI modem doesn't work after 2.4.2->2.4.10 upgrade

[pd]

>Unlike 2.4.2, 2.4.10 can automatically detect and configure PCI modems.
>That's why its already in use to setserial.  The kernel has already
>found your modem, and assigned it ttyS4 (0-3 are reserved for the
>standard COM1-4).  Theoretically, then, all you have to do is relink
>/dev/modem to /dev/ttyS4, and you should be set.

That is exactly what it turned out to be.  Tnx.  Works fine now.

>If you had read through 'dmesg', and the problem if what I suspect it
>is, you would have seen this pretty obviously.

I looked in dmesg and there it was, now that I know what to look for.

I also found a "redundant entry in serial pci_table" message and will
be sending the requested message off to [e-mail].
-- 

-pd