[PATCH] driver for eurotech PC104 on-board watchdog timer

[Rodolfo Giometti]

--a8Wt8u1KmwUX3Y2C
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hello,

I developed this two simple drivers for the Eurotech PC104 on-board
watchdog timer.

One patch is for kernel 2.4.10 (but it applies to the 2.4.12 too) and
one is for kernel 2.2.19. I hope you add these patchs to the Linux
kernel source.

Regards,
Rodolfo Giometti

-- 

     \\\\
     (o o)
--oOO-(_)-OOo------------------------------------------------------------
Rodolfo Giometti (ZtW)               e-mail:    [e-mail]
                                                [e-mail]
Programmi e soluzioni GNU                       [e-mail]
*  Linux Device Drivers              home page: giometti.oltrelinux.com
*  Embedded Systems                  phone:     [phone]

--a8Wt8u1KmwUX3Y2C
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="patch-2.4.10-eurotechwdt-1.0.0"

diff -urN --exclude-from=patch-exclude linux-2.4.10/drivers/char/Config.in lp4_wd/drivers/char/Config.in
--- linux-2.4.10/drivers/char/Config.in	Sun Sep 23 18:52:38 2001
+++ lp4_wd/drivers/char/Config.in	Tue Oct  9 23:00:46 2001
@@ -166,6 +166,7 @@
       fi
    fi
    tristate '  ZF MachZ Watchdog' CONFIG_MACHZ_WDT
+   tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
 fi
 endmenu
 
diff -urN --exclude-from=patch-exclude linux-2.4.10/drivers/char/Makefile lp4_wd/drivers/char/Makefile
--- linux-2.4.10/drivers/char/Makefile	Sun Sep  9 19:43:02 2001
+++ lp4_wd/drivers/char/Makefile	Tue Oct  9 23:00:43 2001
@@ -228,6 +228,7 @@
 obj-$(CONFIG_977_WATCHDOG) += wdt977.o
 obj-$(CONFIG_I810_TCO) += i810-tco.o
 obj-$(CONFIG_MACHZ_WDT) += machzwd.o
+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 
 
diff -urN --exclude-from=patch-exclude linux-2.4.10/drivers/char/eurotechwdt.c lp4_wd/drivers/char/eurotechwdt.c
--- linux-2.4.10/drivers/char/eurotechwdt.c	Thu Jan  1 01:00:00 1970
+++ lp4_wd/drivers/char/eurotechwdt.c	Wed Oct 10 11:04:13 2001
@@ -0,0 +1,480 @@
+/*
+ *	Eurotech CPU-1220/1410 on board WDT driver for Linux 2.4.x
+ *
+ *	(c) Copyright 2001 Ascensit <[e-mail]>
+ *	(c) Copyright 2001 Rodolfo Giometti <[e-mail]>
+ *
+ *	Based on wdt.c.
+ *	Original copyright messages:
+ *
+ *      (c) Copyright 1996-1997 Alan Cox <[e-mail]>, All Rights Reserved.
+ *                              http://www.redhat.com
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *      warranty for any of this software. This material is provided
+ *      "AS-IS" and at no charge.
+ *
+ *      (c) Copyright 1995    Alan Cox <[e-mail]>*
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+
+static int eurwdt_is_open;
+static int eurwdt_timeout; 
+static spinlock_t eurwdt_lock;
+ 
+/*
+ *      You must set these - there is no sane way to probe for this board.
+ *      You can use wdt=x,y to set these now.
+ */
+ 
+static int io = 0x3f0;
+static int irq = 10;
+static char *ev = "int";
+ 
+#define WDT_TIMEOUT		60                /* 1 minute */
+
+
+/*
+ * Some symbolic names 
+ */
+
+#define WDT_CTRL_REG		0x30
+#define WDT_OUTPIN_CFG		0xe2
+   #define WDT_EVENT_INT	   0x00
+   #define WDT_EVENT_REBOOT	   0x08
+#define WDT_UNIT_SEL		0xf1
+   #define WDT_UNIT_SECS	   0x80
+#define WDT_TIMEOUT_VAL		0xf2
+#define WDT_TIMER_CFG		0xf3
+ 
+
+#ifndef MODULE
+
+/**
+ *      eurwdt_setup:
+ *      @str: command line string
+ *
+ *      Setup options. The board isn't really probe-able so we have to
+ *      get the user to tell us the configuration. Sane people build it
+ *      modular but the others come here.
+ */
+ 
+static int __init eurwdt_setup(char *str)
+{
+   int ints[4];
+ 
+   str = get_options (str, ARRAY_SIZE(ints), ints);
+ 
+   if (ints[0] > 0) {
+      io = ints[1];
+      if (ints[0] > 1)
+         irq = ints[2];
+   }
+ 
+   return 1;
+}
+ 
+__setup("wdt=", eurwdt_setup);
+
+#endif /* !MODULE */
+ 
+MODULE_PARM(io, "i");
+MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
+MODULE_PARM(irq, "i");
+MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
+MODULE_PARM(ev, "s");
+MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `reboot')");
+
+
+/*
+ *      Programming support
+ */
+
+static inline void eurwdt_write_reg(u8 index, u8 data)
+{
+   outb(index, io);
+   outb(data, io+1);
+}
+
+static inline void eurwdt_lock_chip(void)
+{
+   outb(0xaa, io);
+}
+
+static inline void eurwdt_unlock_chip(void)
+{
+   outb(0x55, io);
+   eurwdt_write_reg(0x07, 0x08);   /* set the logical device */
+}
+
+static inline void eurwdt_set_timeout(int timeout)
+{
+   eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout);
+}
+
+static inline void eurwdt_disable_timer(void)
+{
+   eurwdt_set_timeout(0);
+}
+ 
+static void eurwdt_activate_timer(void)
+{
+   eurwdt_disable_timer();
+   eurwdt_write_reg(WDT_CTRL_REG, 0x01);      /* activate the WDT */
+   eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ?
+                                    WDT_EVENT_INT : WDT_EVENT_REBOOT);
+   /* Setting interrupt line */
+   if (irq == 2 || irq > 15 || irq < 0) {
+      printk(KERN_ERR ": invalid irq number\n");
+      irq = 0;   /* if invalid we disable interrupt */
+   }
+   if (irq == 0)
+      printk(KERN_INFO ": interrupt disabled\n");
+   eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);
+
+   eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS);   /* we use seconds */
+   eurwdt_set_timeout(0);                           /* the default timeout */ 
+}
+
+
+/*
+ *      Kernel methods.
+ */
+ 
+void eurwdt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+   printk(KERN_CRIT "timeout WDT timeout\n");
+ 
+#ifdef ONLY_TESTING
+   printk(KERN_CRIT "Would Reboot.\n");
+#else
+   printk(KERN_CRIT "Initiating system reboot.\n");
+   machine_restart(NULL);
+#endif
+}
+
+
+/**
+ *      eurwdt_ping:
+ *
+ *      Reload counter one with the watchdog timeout.
+ */
+ 
+static void eurwdt_ping(void)
+{
+   /* Write the watchdog default value */
+   eurwdt_set_timeout(eurwdt_timeout);
+}
+ 
+/**
+ *      eurwdt_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write (unused as data does not matter here
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+ 
+static ssize_t eurwdt_write(struct file *file, const char *buf, size_t count,
+loff_t *ppos)
+{
+   /*  Can't seek (pwrite) on this device  */
+   if (ppos != &file->f_pos)
+      return -ESPIPE;
+ 
+   if (count) {
+      eurwdt_ping();   /* the default timeout */
+      return 1;
+   }
+
+   return 0;
+}
+
+/**
+ *      eurwdt_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+ 
+static int eurwdt_ioctl(struct inode *inode, struct file *file,
+        unsigned int cmd, unsigned long arg)
+{
+   static struct watchdog_info ident = {
+      options		: WDIOF_CARDRESET,
+      firmware_version	: 1,
+      identity		: "WDT Eurotech CPU-1220/1410"
+   };
+
+   int time;
+ 
+   switch(cmd) {
+      default:
+         return -ENOTTY;
+
+      case WDIOC_GETSUPPORT:
+         return copy_to_user((struct watchdog_info *)arg, &ident,
+               sizeof(ident)) ? -EFAULT : 0;
+ 
+      case WDIOC_GETBOOTSTATUS:
+         return put_user(0, (int *) arg);
+
+      case WDIOC_KEEPALIVE:
+         eurwdt_ping();
+         return 0;
+
+      case WDIOC_SETTIMEOUT:
+         if (copy_from_user(&time, (int *) arg, sizeof(int)))
+            return -EFAULT;
+
+         /* Sanity check */
+         if (time < 0 || time > 255)
+            return -EINVAL;
+
+         eurwdt_timeout = time; 
+         eurwdt_set_timeout(time); 
+         return 0;
+   }
+}
+
+/**
+ *      eurwdt_open:
+ *      @inode: inode of device
+ *      @file: file handle to device
+ *
+ *      The misc device has been opened. The watchdog device is single
+ *      open and on opening we load the counter.
+ */
+ 
+static int eurwdt_open(struct inode *inode, struct file *file)
+{
+   switch (MINOR(inode->i_rdev)) {
+      case WATCHDOG_MINOR:
+         spin_lock(&eurwdt_lock);
+         if (eurwdt_is_open) {
+            spin_unlock(&eurwdt_lock);
+            return -EBUSY;
+         }
+
+         eurwdt_is_open = 1;
+         eurwdt_timeout = WDT_TIMEOUT;   /* initial timeout */
+
+         /* Activate the WDT */
+         eurwdt_activate_timer(); 
+            
+         spin_unlock(&eurwdt_lock);
+
+         MOD_INC_USE_COUNT;
+
+         return 0;
+
+         case TEMP_MINOR:
+            return 0;
+
+         default:
+            return -ENODEV;
+   }
+}
+ 
+/**
+ *      eurwdt_release:
+ *      @inode: inode to board
+ *      @file: file handle to board
+ *
+ *      The watchdog has a configurable API. There is a religious dispute
+ *      between people who want their watchdog to be able to shut down and
+ *      those who want to be sure if the watchdog manager dies the machine
+ *      reboots. In the former case we disable the counters, in the latter
+ *      case you have to open it again very soon.
+ */
+ 
+static int eurwdt_release(struct inode *inode, struct file *file)
+{
+   if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
+#ifndef CONFIG_WATCHDOG_NOWAYOUT
+      eurwdt_disable_timer();
+#endif
+      eurwdt_is_open = 0;
+
+      MOD_DEC_USE_COUNT;
+   }
+
+   return 0;
+}
+ 
+/**
+ *      eurwdt_notify_sys:
+ *      @this: our notifier block
+ *      @code: the event being reported
+ *      @unused: unused
+ *
+ *      Our notifier is called on system shutdowns. We want to turn the card
+ *      off at reboot otherwise the machine will reboot again during memory
+ *      test or worse yet during the following fsck. This would suck, in fact
+ *      trust me - if it happens it does suck.
+ */
+ 
+static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
+        void *unused)
+{
+   if (code == SYS_DOWN || code == SYS_HALT) {
+      /* Turn the card off */
+      eurwdt_disable_timer();
+   }
+
+   return NOTIFY_DONE;
+}
+ 
+/*
+ *      Kernel Interfaces
+ */
+ 
+ 
+static struct file_operations eurwdt_fops = {
+        owner:          THIS_MODULE,
+        llseek:         no_llseek,
+        write:          eurwdt_write,
+        ioctl:          eurwdt_ioctl,
+        open:           eurwdt_open,
+        release:        eurwdt_release,
+};
+
+static struct miscdevice eurwdt_miscdev =
+{
+        WATCHDOG_MINOR,
+        "watchdog",
+        &eurwdt_fops
+};
+ 
+/*
+ *      The WDT card needs to learn about soft shutdowns in order to
+ *      turn the timebomb registers off.
+ */
+ 
+static struct notifier_block eurwdt_notifier =
+{
+        eurwdt_notify_sys,
+        NULL,
+        0
+};
+ 
+/**
+ *      cleanup_module:
+ *
+ *      Unload the watchdog. You cannot do this with any file handles open.
+ *      If your watchdog is set to continue ticking on close and you unload
+ *      it, well it keeps ticking. We won't get the interrupt but the board
+ *      will not touch PC memory so all is fine. You just have to load a new
+ *      module in 60 seconds or reboot.
+ */
+ 
+static void __exit eurwdt_exit(void)
+{
+   eurwdt_lock_chip();
+
+   misc_deregister(&eurwdt_miscdev);
+
+   unregister_reboot_notifier(&eurwdt_notifier);
+   release_region(io, 2);
+   free_irq(irq, NULL);
+}
+ 
+/**
+ *      eurwdt_init:
+ *
+ *      Set up the WDT watchdog board. After grabbing the resources 
+ *      we require we need also to unlock the device.
+ *      The open() function will actually kick the board off.
+ */
+ 
+static int __init eurwdt_init(void)
+{
+   int ret;
+ 
+   ret = misc_register(&eurwdt_miscdev);
+   if (ret) {
+      printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
+            WATCHDOG_MINOR);
+      goto out;
+   }
+
+   ret = request_irq(irq, eurwdt_interrupt, SA_INTERRUPT, "eurwdt", NULL);
+   if(ret) {
+      printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
+      goto outmisc;
+   }
+
+   if (!request_region(io, 2, "eurwdt")) {
+       printk(KERN_ERR "eurwdt: IO %X is not free.\n", io);
+       ret = -EBUSY;
+       goto outirq;
+   }
+
+   ret = register_reboot_notifier(&eurwdt_notifier);
+   if (ret) {
+      printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
+      goto outreg;
+   }
+
+   eurwdt_unlock_chip();
+ 
+   ret = 0;
+   printk(KERN_INFO "Eurotech WDT driver 0.01 at %X (Interrupt %d)"
+                    " - timeout event: %s\n", 
+         io, irq, (!strcmp("int", ev) ? "int" : "reboot"));
+
+   spin_lock_init(&eurwdt_lock);
+
+   out:
+      return ret;
+ 
+   outreg:
+      release_region(io, 2);
+
+   outirq:
+      free_irq(irq, NULL);
+
+   outmisc:
+      misc_deregister(&eurwdt_miscdev);
+      goto out;
+}
+ 
+module_init(eurwdt_init);
+module_exit(eurwdt_exit);
+ 
+MODULE_AUTHOR("Rodolfo Giometti");
+MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
+MODULE_LICENSE("GPL");
+EXPORT_NO_SYMBOLS;
diff -urN --exclude-from=patch-exclude linux-2.4.10/include/linux/watchdog.h lp4_wd/include/linux/watchdog.h
--- linux-2.4.10/include/linux/watchdog.h	Thu Oct  4 13:50:34 2001
+++ lp4_wd/include/linux/watchdog.h	Wed Oct 10 11:40:15 2001
@@ -25,6 +25,7 @@
 #define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
 #define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
 #define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define WDIOC_SETTIMEOUT        _IOW(WATCHDOG_IOCTL_BASE, 6, int)
 
 #define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
 #define	WDIOS_UNKNOWN		-1	/* Unknown status error */

--a8Wt8u1KmwUX3Y2C
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="patch-2.2.19-eurotechwdt-1.0.0"

diff -urN --exclude-from=patch-exclude linux-2.2.19/drivers/char/Config.in lp2_wd/drivers/char/Config.in
--- linux-2.2.19/drivers/char/Config.in	Sun Mar 25 18:37:30 2001
+++ lp2_wd/drivers/char/Config.in	Tue Oct  9 23:11:18 2001
@@ -114,6 +114,7 @@
      fi
   fi
   tristate '   WDT PCI Watchdog timer' CONFIG_WDTPCI
+  tristate '  Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
   endmenu
 fi
 
diff -urN --exclude-from=patch-exclude linux-2.2.19/drivers/char/Makefile lp2_wd/drivers/char/Makefile
--- linux-2.2.19/drivers/char/Makefile	Sun Mar 25 18:37:30 2001
+++ lp2_wd/drivers/char/Makefile	Tue Oct  9 23:11:05 2001
@@ -317,6 +317,14 @@
   endif
 endif
 
+ifeq ($(CONFIG_EUROTECH_WDT),y)
+O_OBJS += eurotechwdt.o
+else
+  ifeq ($(CONFIG_EUROTECH_WDT),m)
+  M_OBJS += eurotechwdt.o
+  endif
+endif
+
 ifeq ($(CONFIG_MIXCOMWD),y)
 O_OBJS += mixcomwd.o
 else
diff -urN --exclude-from=patch-exclude linux-2.2.19/drivers/char/eurotechwdt.c lp2_wd/drivers/char/eurotechwdt.c
--- linux-2.2.19/drivers/char/eurotechwdt.c	Thu Jan  1 01:00:00 1970
+++ lp2_wd/drivers/char/eurotechwdt.c	Wed Oct 10 10:59:09 2001
@@ -0,0 +1,475 @@
+/*
+ *	Eurotech CPU-1220/1410 on board WDT driver for Linux 2.2.x
+ *
+ *	(c) Copyright 2001 Ascensit <[e-mail]>
+ *	(c) Copyright 2001 Rodolfo Giometti <[e-mail]>
+ *
+ *	Based on wdt.c.
+ *	Original copyright messages:
+ *
+ *      (c) Copyright 1996-1997 Alan Cox <[e-mail]>, All Rights Reserved.
+ *                              http://www.redhat.com
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *      warranty for any of this software. This material is provided
+ *      "AS-IS" and at no charge.
+ *
+ *      (c) Copyright 1995    Alan Cox <[e-mail]>*
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+
+static int eurwdt_is_open;
+static int eurwdt_timeout; 
+static spinlock_t eurwdt_lock;
+ 
+/*
+ *      You must set these - there is no sane way to probe for this board.
+ *      You can use wdt=x,y to set these now.
+ */
+ 
+static int io = 0x3f0;
+static int irq = 10;
+static char *ev = "int";
+ 
+#define WDT_TIMEOUT		60                /* 1 minute */
+
+
+/*
+ * Some symbolic names 
+ */
+
+#define WDT_CTRL_REG		0x30
+#define WDT_OUTPIN_CFG		0xe2
+   #define WDT_EVENT_INT	   0x00
+   #define WDT_EVENT_REBOOT	   0x08
+#define WDT_UNIT_SEL		0xf1
+   #define WDT_UNIT_SECS	   0x80
+#define WDT_TIMEOUT_VAL		0xf2
+#define WDT_TIMER_CFG		0xf3
+ 
+
+#ifndef MODULE
+
+/**
+ *      eurwdt_setup:
+ *      @str: command line string
+ *
+ *      Setup options. The board isn't really probe-able so we have to
+ *      get the user to tell us the configuration. Sane people build it
+ *      modular but the others come here.
+ */
+ 
+static int __init eurwdt_setup(char *str)
+{
+   int ints[4];
+ 
+   str = get_options (str, ARRAY_SIZE(ints), ints);
+ 
+   if (ints[0] > 0) {
+      io = ints[1];
+      if (ints[0] > 1)
+         irq = ints[2];
+   }
+ 
+   return 1;
+}
+ 
+__setup("wdt=", eurwdt_setup);
+
+#endif /* !MODULE */
+ 
+MODULE_PARM(io, "i");
+MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
+MODULE_PARM(irq, "i");
+MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
+MODULE_PARM(ev, "s");
+MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `reboot')");
+
+
+/*
+ *      Programming support
+ */
+
+static inline void eurwdt_write_reg(u8 index, u8 data)
+{
+   outb(index, io);
+   outb(data, io+1);
+}
+
+static inline void eurwdt_lock_chip(void)
+{
+   outb(0xaa, io);
+}
+
+static inline void eurwdt_unlock_chip(void)
+{
+   outb(0x55, io);
+   eurwdt_write_reg(0x07, 0x08);   /* set the logical device */
+}
+
+static inline void eurwdt_set_timeout(int timeout)
+{
+   eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout);
+}
+
+static inline void eurwdt_disable_timer(void)
+{
+   eurwdt_set_timeout(0);
+}
+ 
+static void eurwdt_activate_timer(void)
+{
+   eurwdt_disable_timer();
+   eurwdt_write_reg(WDT_CTRL_REG, 0x01);      /* activate the WDT */
+   eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ?
+                                    WDT_EVENT_INT : WDT_EVENT_REBOOT);
+   /* Setting interrupt line */
+   if (irq == 2 || irq > 15 || irq < 0) {
+      printk(KERN_ERR ": invalid irq number\n");
+      irq = 0;   /* if invalid we disable interrupt */
+   }
+   if (irq == 0)
+      printk(KERN_INFO ": interrupt disabled\n");
+   eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);
+
+   eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS);   /* we use seconds */
+   eurwdt_set_timeout(0);                           /* the default timeout */ 
+}
+
+
+/*
+ *      Kernel methods.
+ */
+ 
+void eurwdt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+   printk(KERN_CRIT "timeout WDT timeout\n");
+ 
+#ifdef ONLY_TESTING
+   printk(KERN_CRIT "Would Reboot.\n");
+#else
+   printk(KERN_CRIT "Initiating system reboot.\n");
+   machine_restart(NULL);
+#endif
+}
+
+
+/**
+ *      eurwdt_ping:
+ *
+ *      Reload counter one with the watchdog timeout.
+ */
+ 
+static void eurwdt_ping(void)
+{
+   /* Write the watchdog default value */
+   eurwdt_set_timeout(eurwdt_timeout);
+}
+ 
+/**
+ *      eurwdt_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write (unused as data does not matter here
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+ 
+static ssize_t eurwdt_write(struct file *file, const char *buf, size_t count,
+loff_t *ppos)
+{
+   /*  Can't seek (pwrite) on this device  */
+   if (ppos != &file->f_pos)
+      return -ESPIPE;
+ 
+   if (count) {
+      eurwdt_ping();   /* the default timeout */
+      return 1;
+   }
+
+   return 0;
+}
+
+/**
+ *      eurwdt_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+ 
+static int eurwdt_ioctl(struct inode *inode, struct file *file,
+        unsigned int cmd, unsigned long arg)
+{
+   static struct watchdog_info ident = {
+      options		: WDIOF_CARDRESET,
+      firmware_version	: 1,
+      identity		: "WDT Eurotech CPU-1220/1410"
+   };
+
+   int time;
+ 
+   switch(cmd) {
+      default:
+         return -ENOTTY;
+
+      case WDIOC_GETSUPPORT:
+         return copy_to_user((struct watchdog_info *)arg, &ident,
+               sizeof(ident)) ? -EFAULT : 0;
+ 
+      case WDIOC_GETBOOTSTATUS:
+         return put_user(0, (int *) arg);
+
+      case WDIOC_KEEPALIVE:
+         eurwdt_ping();
+         return 0;
+
+      case WDIOC_SETTIMEOUT:
+         if (copy_from_user(&time, (int *) arg, sizeof(int)))
+            return -EFAULT;
+
+         /* Sanity check */
+         if (time < 0 || time > 255)
+            return -EINVAL;
+
+         eurwdt_timeout = time; 
+         eurwdt_set_timeout(time); 
+         return 0;
+   }
+}
+
+/**
+ *      eurwdt_open:
+ *      @inode: inode of device
+ *      @file: file handle to device
+ *
+ *      The misc device has been opened. The watchdog device is single
+ *      open and on opening we load the counter.
+ */
+ 
+static int eurwdt_open(struct inode *inode, struct file *file)
+{
+   switch (MINOR(inode->i_rdev)) {
+      case WATCHDOG_MINOR:
+         spin_lock(&eurwdt_lock);
+         if (eurwdt_is_open) {
+            spin_unlock(&eurwdt_lock);
+            return -EBUSY;
+         }
+
+         eurwdt_is_open = 1;
+         eurwdt_timeout = WDT_TIMEOUT;   /* initial timeout */
+
+         /* Activate the WDT */
+         eurwdt_activate_timer(); 
+            
+         spin_unlock(&eurwdt_lock);
+
+         MOD_INC_USE_COUNT;
+
+         return 0;
+
+         case TEMP_MINOR:
+            return 0;
+
+         default:
+            return -ENODEV;
+   }
+}
+ 
+/**
+ *      eurwdt_release:
+ *      @inode: inode to board
+ *      @file: file handle to board
+ *
+ *      The watchdog has a configurable API. There is a religious dispute
+ *      between people who want their watchdog to be able to shut down and
+ *      those who want to be sure if the watchdog manager dies the machine
+ *      reboots. In the former case we disable the counters, in the latter
+ *      case you have to open it again very soon.
+ */
+ 
+static int eurwdt_release(struct inode *inode, struct file *file)
+{
+   if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
+#ifndef CONFIG_WATCHDOG_NOWAYOUT
+      eurwdt_disable_timer();
+#endif
+      eurwdt_is_open = 0;
+
+      MOD_DEC_USE_COUNT;
+   }
+
+   return 0;
+}
+ 
+/**
+ *      eurwdt_notify_sys:
+ *      @this: our notifier block
+ *      @code: the event being reported
+ *      @unused: unused
+ *
+ *      Our notifier is called on system shutdowns. We want to turn the card
+ *      off at reboot otherwise the machine will reboot again during memory
+ *      test or worse yet during the following fsck. This would suck, in fact
+ *      trust me - if it happens it does suck.
+ */
+ 
+static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
+        void *unused)
+{
+   if (code == SYS_DOWN || code == SYS_HALT) {
+      /* Turn the card off */
+      eurwdt_disable_timer();
+   }
+
+   return NOTIFY_DONE;
+}
+ 
+/*
+ *      Kernel Interfaces
+ */
+ 
+ 
+static struct file_operations eurwdt_fops = {
+        write:          eurwdt_write,
+        ioctl:          eurwdt_ioctl,
+        open:           eurwdt_open,
+        release:        eurwdt_release,
+};
+
+static struct miscdevice eurwdt_miscdev =
+{
+        WATCHDOG_MINOR,
+        "watchdog",
+        &eurwdt_fops
+};
+ 
+/*
+ *      The WDT card needs to learn about soft shutdowns in order to
+ *      turn the timebomb registers off.
+ */
+ 
+static struct notifier_block eurwdt_notifier =
+{
+        eurwdt_notify_sys,
+        NULL,
+        0
+};
+ 
+/**
+ *      cleanup_module:
+ *
+ *      Unload the watchdog. You cannot do this with any file handles open.
+ *      If your watchdog is set to continue ticking on close and you unload
+ *      it, well it keeps ticking. We won't get the interrupt but the board
+ *      will not touch PC memory so all is fine. You just have to load a new
+ *      module in 60 seconds or reboot.
+ */
+
+#ifdef MODULE
+ 
+#define eurwdt_init init_module
+ 
+void cleanup_module(void)
+{
+   eurwdt_lock_chip();
+
+   misc_deregister(&eurwdt_miscdev);
+
+   unregister_reboot_notifier(&eurwdt_notifier);
+   release_region(io, 2);
+   free_irq(irq, NULL);
+}
+
+#endif
+ 
+/**
+ *      eurwdt_init:
+ *
+ *      Set up the WDT watchdog board. After grabbing the resources 
+ *      we require we need also to unlock the device.
+ *      The open() function will actually kick the board off.
+ */
+ 
+__initfunc(int eurwdt_init(void))
+{
+   int ret;
+ 
+   ret = misc_register(&eurwdt_miscdev);
+   if (ret) {
+      printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
+            WATCHDOG_MINOR);
+      goto out;
+   }
+
+   ret = request_irq(irq, eurwdt_interrupt, SA_INTERRUPT, "eurwdt", NULL);
+   if(ret) {
+      printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
+      goto outmisc;
+   }
+
+   request_region(io, 2, "eurwdt");
+
+   ret = register_reboot_notifier(&eurwdt_notifier);
+   if (ret) {
+      printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret);
+      goto outreg;
+   }
+
+   eurwdt_unlock_chip();
+ 
+   ret = 0;
+   printk(KERN_INFO "Eurotech WDT driver 0.01 at %X (Interrupt %d)"
+                    " - timeout event: %s\n", 
+         io, irq, (!strcmp("int", ev) ? "int" : "reboot"));
+
+   spin_lock_init(&eurwdt_lock);
+
+   out:
+      return ret;
+ 
+   outreg:
+      release_region(io, 2);
+      free_irq(irq, NULL);
+
+   outmisc:
+      misc_deregister(&eurwdt_miscdev);
+      goto out;
+}
+ 
+ 
+MODULE_AUTHOR("Rodolfo Giometti");
+MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
+EXPORT_NO_SYMBOLS;
diff -urN --exclude-from=patch-exclude linux-2.2.19/include/linux/watchdog.h lp2_wd/include/linux/watchdog.h
--- linux-2.2.19/include/linux/watchdog.h	Sun Mar 25 18:37:40 2001
+++ lp2_wd/include/linux/watchdog.h	Wed Oct 10 11:41:29 2001
@@ -25,6 +25,7 @@
 #define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
 #define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
 #define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define WDIOC_SETTIMEOUT        _IOW(WATCHDOG_IOCTL_BASE, 6, int)
 
 #define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
 #define	WDIOS_UNKNOWN		-1	/* Unknown status error */

--a8Wt8u1KmwUX3Y2C--