-- -- (I'M NOT ON THE MAILINGLIST SO PLEASE CC ME)--1. Mounting /dev/hdh1 deletes /dev/hda1
2. I have inserted a new PCI based IDE adapter so I am able to use 8 IDE disks. When mounting them one of the disks on the second controller over-shadows a disk on the first (build-in)
See following trace:
[root@calithturon scripts]# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda1 3111408 2448976 504380 83% / /dev/hdc1 4134900 2703864 1220988 69% /home /dev/hdc2 4134932 817688 3107196 21% /usr/local/packages /dev/hdc3 1565424 1002960 562464 65% /mnt/files /dev/hdb2 3301944 7060 3127156 1% /var/www
[root@calithturon scripts]# mount /dev/hde1 /mnt/hde [root@calithturon scripts]# mount /dev/hdf1 /mnt/hdf [root@calithturon scripts]# mount /dev/hdg1 /mnt/hdg [root@calithturon scripts]# mount /dev/hdh1 /mnt/hdh
[root@calithturon scripts]# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hdh1 3111408 2448976 504380 83% / /dev/hdc1 4134900 2703864 1220988 69% /home /dev/hdc2 4134932 817688 3107196 21% /usr/local/packages /dev/hdc3 1565424 1002960 562464 65% /mnt/files /dev/hdb2 3301944 7060 3127156 1% /var/www /dev/hde1 1769968 651956 1028100 39% /mnt/hde /dev/hdf1 2071576 989692 976652 51% /mnt/hdf /dev/hdg1 2579600 537516 1911048 22% /mnt/hdg /dev/hdh1 1771928 752468 929448 45% /mnt/hdh
[root@calithturon scripts]# df | grep hdh /dev/hdh1 3111408 2448976 504380 83% / /dev/hdh1 1771928 752468 929448 45% /mnt/hdh
(Now hdh1 has shadowed hda1. hdh1 is listed two times and with two different disk sizes) See this:
[root@calithturon scripts]# umount /dev/hda1 (which used to be /) umount: /dev/hda1: not mounted
3. Keywords: Mount, /dev/hdh1, shadow
4. Kernel version: Linux version 2.4.10 (root@calithturon.fanitas.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #1 Wed Sep 26 18:59:20 CEST 2001
5. Not an oops!
6. Failure demo (only works on systems with 8 drives): [root@calithturon scripts]# df | grep hdh /dev/hdh1 3111408 2448976 504380 83% / /dev/hdh1 1771928 752468 929448 45% /mnt/hdh
7. Environment
7.1 Output of the ver_linux script:
[root@calithturon scripts]# sh ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux calithturon.fanitas.com 2.4.10 #1 Wed Sep 26 18:59:20 CEST 2001 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 binutils 2.10.91.0.2 util-linux 2.10s mount 2.11b modutils 2.4.2 e2fsprogs 1.19 PPP 2.4.0 isdn4k-utils 3.1pre1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.57 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded vmnet vmmon [root@calithturon scripts]#
7.2 Processor information [root@calithturon scripts]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 3 model name : Pentium II (Klamath) stepping : 4 cpu MHz : 264.888 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov mmx bogomips : 527.56
7.3 Module information [root@calithturon scripts]# cat /proc/modules vmnet 16448 1 vmmon 18224 0 (unused)
7.4 Loaded driver and hardware information [root@calithturon scripts]# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0800-083f : Intel Corporation 82371AB PIIX4 ACPI 0840-085f : Intel Corporation 82371AB PIIX4 ACPI 0cf8-0cff : PCI conf1 d400-d4ff : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller (#2) d400-d407 : ide3 d410-d4ff : HPT366 d800-d8ff : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller d800-d807 : ide2 d810-d8ff : HPT366 dc80-dcbf : 3Com Corporation 3c905 100BaseTX [Boomerang] dc80-dcbf : 00:11.0 dcc8-dccf : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller (#2) dcc8-dccf : ide3 dcd0-dcd3 : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller dcd2-dcd2 : ide2 dcd4-dcd7 : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller (#2) dcd6-dcd6 : ide3 dcd8-dcdf : HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller dcd8-dcdf : ide2 dce0-dcff : Intel Corporation 82371AB PIIX4 USB dce0-dcff : usb-uhci e000-efff : PCI Bus #01 ec00-ecff : ATI Technologies Inc 3D Rage Pro AGP 1X ffa0-ffaf : Intel Corporation 82371AB PIIX4 IDE ffa0-ffa7 : ide0 ffa8-ffaf : ide1
[root@calithturon scripts]# cat /proc/iomem 00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000c97ff : Extension ROM 000f0000-000fffff : System ROM 00100000-17ffffff : System RAM 00100000-0022b347 : Kernel code 0022b348-0027f817 : Kernel data f4000000-f7ffffff : Intel Corporation 440LX/EX - 82443LX/EX Host bridge f9000000-f9ffffff : PCI Bus #01 fc000000-feffffff : PCI Bus #01 fcfff000-fcffffff : ATI Technologies Inc 3D Rage Pro AGP 1X fd000000-fdffffff : ATI Technologies Inc 3D Rage Pro AGP 1X ffe00000-ffffffff : reserved
7.5 PCI information [root@calithturon scripts]# lspci -vvv 00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fc000000-feffffff Prefetchable memory behind bridge: f9000000-f9ffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at dce0 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:0e.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at dcd8 [size=8] Region 1: I/O ports at dcd0 [size=4] Region 4: I/O ports at d800 [size=256] Expansion ROM at fb000000 [disabled] [size=128K]
00:0e.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at dcc8 [size=8] Region 1: I/O ports at dcd4 [size=4] Region 4: I/O ports at d400 [size=256]
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:11.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Subsystem: Dell Computer Corporation: Unknown device 006f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at dc80 [size=64] Expansion ROM at fb000000 [disabled] [size=64K]
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X (rev 5c) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 806f Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at ec00 [size=256] Region 2: Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Status: RQ=255 SBA+ 64bit- FW- Rate=x1 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
7.6 SCSI information [root@calithturon scripts]# cat /proc/scsi/scsi Attached devices: none
8. Help offered If the developers do not have access to the failing hardware, software or anything I can provide an SSH account on the failing machine. It is on the Internet and always up!
-- Best regards / Venlig hilsen - Morten Green Hermansen, Fanitas - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/