Re: 3c905b works with 10bt hub - not with 10/100 switch

Andrzej Krzysztofowicz (ankry@pg.gda.pl)
Tue, 14 Aug 2001 12:53:53 +0200 (MET DST)

Aaron Lehmann wrote:
> On Tue, Aug 14, 2001 at 02:14:45AM -0700, Aaron Lehmann wrote:
> > I've been having major problems on my network as of today.
>
> I seem to have solved this problem.
>
> I put in a 3c595 - same problem.
>
> Luckily, I had the persistance to try another card. I chose to try
> Client's eth0 as Server's eth2. Well, it worked.
>
> I hope this network setup will work on a switch for longer than the
> 3c905b did.

Did you check the board's NVRAM setting for media type ?
AFAIR changing Auto/Manual was related with this problem.

But I hit it about three years ago...

Andrzej

-- 
=======================================================================
  Andrzej M. Krzysztofowicz               ankry@mif.pg.gda.pl
  phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math.,   Technical University of Gdansk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/