Re: Problems with 2.4.7 and VIA IDE

[Glenn C. Hofmann]

I think I can help verify your suspicions with the PCI problems, since I
get the error with my ethernet device (3C905B), although I do not get
the ide errors.  I went from kernel 2.4.7-pre3 to 2.4.8 and started
receiving these errors.  I have a WinTV Go board that is notorious for
locking things up which shares an IRQ with the ethernet controller.  I
started up my tv viewer program and lost my ethernet connection.  If
there is anything I can do that might help further, let me know.

Chris

On 28 Jul 2001 17:22:09 +0100, Alan Cox wrote:
> >         This is sort of a continuation of my last msg. I tried a rpm
> > -Va on one xterm and a tar cf /dev/null / on another, and I got
> > another dma error:
> > 
> > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> 
> BadCRC is normally a cable error, but I'm suspicious that its also one of
> the things caused by PCI bus problems on the VIA stuff
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/