[1.] One line summary of the problem:
PCI Drivers fail to allocate interrrupt for Lucent Cardbus bridge
[2.] Full description of the problem/report:
The 2.4.3 kernel recognizes the card but failts to allocate an
interrupt for it. This is the Lucent Oinoco PCI Carbus bridge product
which is based on the TI1410 chip. In talking with Dave Hinds about
the problem, he looked at the enclose outbut and suggested that it
looks like a kernel/PCI problem.
Moving PCI cards arong, removing other from the system etc has no affect.
[3.] Keywords (i.e., modules, networking, kernel): PCI, Kernel
[4.] Kernel version (from /proc/version):
Linux version 2.4.3-12smp (root@porky.devel.redhat.com) (gcc version 2.96 200007
31 (Red Hat Linux 7.1 2.96-85)) #1 SMP Fri Jun 8 14:38:50 EDT 2001
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Kernel messages at boot time:
Jul 16 15:55:26 thx1138 kernel: PCI: Using configuration type 1
Jul 16 15:55:26 thx1138 kernel: PCI: Probing PCI hardware
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19
Jul 16 15:55:26 thx1138 snmpd: snmpd startup succeeded
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B0,I17,P0) -> 19
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B0,I18,P0) -> 16
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B0,I18,P1) -> 16
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B0,I20,P0) -> 17
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B2,I5,P0) -> 17
Jul 16 15:55:26 thx1138 kernel: PCI->APIC IRQ transform: (B2,I5,P0) -> 17
Jul 16 15:55:26 thx1138 kernel: got res[40000000:40000fff] for resource 0 of Texas Instruments PCI1410 PC card Cardbus Controller
Jul 16 15:55:27 thx1138 kernel: isapnp: Scanning for PnP cards...
Jul 16 15:55:27 thx1138 kernel: isapnp: No Plug & Play device found
:
Error when starting PCMCIA drivers:
ds: no socket drivers loaded!
PCI: Enabling device 00:13.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin A of device 00:13.0. Probably buggy MP table.
ds: no socket drivers loaded!
Yenta IRQ list 0000, PCI irq0
Socket status: 10000047
[6.] A small shell script or example program which triggers the
problem (if possible)
N/A
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux thx1138.ny.zeitgeist.com 2.4.3-12smp #1 SMP Fri Jun 8 14:38:50 EDT 2001 i6
86 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.91.0.2
util-linux 2.10s
mount 2.11b
modutils 2.4.2
e2fsprogs 1.19
pcmcia-cs 3.1.22
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.57
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded ds es1371 ac97_codec gameport soundcore bttv i2c-algo-bit
videodev tuner nls_iso8859-1 sr_mod yenta_socket tvaudio i2c-core rocket applet
alk nfs lockd sunrpc pcmcia_core autofs eepro100 ipchains ide-scsi ide-cd cdrom
hid usb-storage input usb-uhci usbcore aic7xxx sd_mod scsi_mod
[root@thx1138 spector]#
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 2
cpu MHz : 501.141
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 999.42
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 2
cpu MHz : 501.141
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 999.42
[7.3.] Module information (from /proc/modules):
ds 6736 1
es1371 30112 1 (autoclean)
ac97_codec 8608 0 (autoclean) [es1371]
gameport 1584 0 (autoclean) [es1371]
soundcore 3984 4 (autoclean) [es1371]
bttv 54320 1 (autoclean)
i2c-algo-bit 7104 1 (autoclean) [bttv]
videodev 5056 3 (autoclean) [bttv]
tuner 4080 1 (autoclean)
nls_iso8859-1 2880 1 (autoclean)
sr_mod 13568 1 (autoclean)
yenta_socket 8816 1
tvaudio 8192 0 (autoclean) (unused)
i2c-core 13472 0 (autoclean) [bttv i2c-algo-bit tuner tvaudio]
rocket 23472 0 (unused)
appletalk 21712 0
nfs 73568 2 (autoclean)
lockd 49264 1 (autoclean) [nfs]
sunrpc 62576 1 (autoclean) [nfs lockd]
pcmcia_core 40864 0 [ds yenta_socket]
autofs 9504 3 (autoclean)
eepro100 16144 1 (autoclean)
ipchains 32000 0 (unused)
ide-scsi 7840 0
ide-cd 26720 0
cdrom 28160 0 [sr_mod ide-cd]
hid 11568 0 (unused)
usb-storage 33568 0
input 3424 0 [hid]
usb-uhci 21392 0 (unused)
usbcore 50560 1 [hid usb-storage usb-uhci]
aic7xxx 113840 13
sd_mod 11040 12
scsi_mod 88864 5 [sr_mod ide-scsi usb-storage aic7xxx sd_mod]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
thx1138.ny.zeitgeist.com % cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0180-01c3 : Comtrol Rocketport
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0400-043f : Intel Corporation 82371AB PIIX4 ACPI
0440-045f : Intel Corporation 82371AB PIIX4 ACPI
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #03
1400-14ff : PCI CardBus #03
c000-cfff : PCI Bus #01
c800-c8ff : ATI Technologies Inc Rage 128 RF
d000-dfff : PCI Bus #02
e400-e4ff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
e400-e4fe : aic7xxx
e800-e8ff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2)
e800-e8fe : aic7xxx
ef00-ef3f : Ensoniq ES1371 [AudioPCI-97]
ef00-ef3f : es1371
ef40-ef5f : Intel Corporation 82557 [Ethernet Pro 100]
ef40-ef5f : eepro100
ef80-ef9f : Intel Corporation 82371AB PIIX4 USB
ef80-ef9f : usb-uhci
ffa0-ffaf : Intel Corporation 82371AB PIIX4 IDE
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
thx1138.ny.zeitgeist.com % cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d07ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffdffff : System RAM
00100000-0024e4a7 : Kernel code
0024e4a8-0026879f : Kernel data
3ffe0000-3fff7fff : ACPI Tables
3fff8000-3fffffff : ACPI Non-volatile Storage
40000000-40000fff : Texas Instruments PCI1410 PC card Cardbus Controller
40400000-407fffff : PCI CardBus #03
40800000-40bfffff : PCI CardBus #03
ee900000-f69fffff : PCI Bus #01
f0000000-f3ffffff : ATI Technologies Inc Rage 128 RF
f6a00000-f6afffff : PCI Bus #02
f6afe000-f6afefff : Brooktree Corporation Bt878
f6afe000-f6afefff : bttv
f6aff000-f6afffff : Brooktree Corporation Bt878
f8000000-fbffffff : Intel Corporation 440GX - 82443GX Host bridge
febff000-febfffff : Intel Corporation 82557 [Ethernet Pro 100]
febff000-febfffff : eepro100
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ff400000-ff4fffff : PCI Bus #01
ff4fc000-ff4fffff : ATI Technologies Inc Rage 128 RF
ff500000-ff5fffff : PCI Bus #02
ff900000-ff9fffff : Intel Corporation 82557 [Ethernet Pro 100]
ffafe000-ffafefff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
ffaff000-ffafffff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2)
fffc0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
thx1138.ny.zeitgeist.com % lspci -vvv
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff400000-ff4fffff
Prefetchable memory behind bridge: ee900000-f69fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at ef80 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:10.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: 00000000f6a00000-00000000f6a00000
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00:11.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corporation 82558 10/100 with Wake on LAN
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ef40 [size=32]
Region 2: Memory at ff900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at ff800000 [disabled] [size=1M]
Capabilities: <available only to root>
00:12.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at ffafe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at ffae0000 [disabled] [size=64K]
Capabilities: <available only to root>
00:12.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 04)
Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD AIC-7895B
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at ffaff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:13.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
Subsystem: SCM Microsystems: Unknown device 3000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 40400000-407ff000 (prefetchable)
Memory window 1: 40800000-40bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00:14.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ef00 [size=64]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0448
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at c800 [size=256]
Region 2: Memory at ff4fc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at ff4c0000 [disabled] [size=128K]
Capabilities: <available only to root>
02:05.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f6afe000 (32-bit, prefetchable) [size=4K]
02:05.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f6aff000 (32-bit, prefetchable) [size=4K]
[7.6.] SCSI information (from /proc/scsi/scsi)
thx1138.ny.zeitgeist.com % cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST39140W Rev: 1281
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-6401TA Rev: 1009
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: SEAGATE Model: ST39140W Rev: 1281
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: iomega Model: jaz 2GB Rev: E.16
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: SEAGATE Model: ST39140W Rev: 1281
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: IOMEGA Model: ZIP 250 Rev: 60.T
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
--------------------------------------------------------------------------------
David HM Spector spector@zeitgeist.com/spector@really-fast.com
President & CEO voice: +1 631.261.5013
Really Fast Systems, LLC Fax: +1 631.262.7497
-----
Supercomputer performance to get the job done.
Commodity pricing to make it affordable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/