RE: Qlogic Fiber Channel

[conway, heather]

Hi Mike,
Looks like QLogic up-rev'd the driver versions on their website.  They have
the source code for both v4.25 and v4.27 posted now and rpm's for v4.25.
Hope that helps.
Heather  

> -----Original Message-----
> From: Mike Black [mailto:[e-mail]]
> Sent: Friday, June 29, 2001 6:53 AM
> To: [e-mail]
> Subject: Qlogic Fiber Channel
> 
> 
> I have been running successfully with qla2x00src-4.15Beta.tgz 
> for several
> months now over several kernel versions up to 2.4.5.
> When I tested 2.4.6-pre6 I decided to use the qlogicfc driver -- BAD
> MISTAKE!!!
> 
> #1 - My system had crashed (for a different reason) and when 
> the raid5 was
> resyncing and e2fsck happening at the same time the kernel locked with
> messages from qlogicfc.o:
> qlogicfc0: no handle slots, this should not happen.
> hostdata->queue  is 2a, inptr: 74
> I was able to repeat this several times so it's a consistent error.
> Waiting for the raid resync to finish did allow this complete 
> -- but now
> when I come in the next morning the console is locked up and 
> no network
> access either.  So I reset it.  Checked the logs and here it is again:
> Jun 29 03:39:21 yeti kernel: qlogicfc0 : no handle slots, 
> this should not
> happen.
> Jun 29 03:39:21 yeti kernel: hostdata->queued is 36, in_ptr: 13
> This was during a tape backup.
> 
> So I'm switching back to qla2x00src-4.15Beta.tgz -- which 
> does the resync
> and e2fsck just fine together BTW.
> Jun 29 06:22:47 yeti kernel: qla2x00: detect() found an HBA
> Jun 29 06:22:47 yeti kernel: qla2x00: VID=1077 DID=2100 
> SSVID=0 SSDID=0
> 
> Only problem is I don't see this package on qlogic's website 
> anymore and
> their "beta" directory is empty now.  I'm waiting to see what 
> their tech
> support says.
> 
> ________________________________________
> Michael D. Black   Principal Engineer
> [e-mail]  321-676-2923,x203
> http://www.csihq.com  Computer Science Innovations
> http://www.csihq.com/~mike  My home page
> FAX [phone]
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>