2.4.5 keeps thinking I can change a CDROM 20 times a second or so.
System :
Compaq Armada 7360 DMT
Relevant stuff from dmesg :
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 71, VID=0e11,
DID=ae33
PCI: Device 00:0e.1 not available because of resource collisions
PCI_IDE: chipset revision 3
PCI_IDE: not 100% native mode: will probe irqs later
hda: IBM-DTCA-23240, ATA DISK drive
hdb: COMPAQ CRD-S88P, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 6354432 sectors (3253 MB) w/468KiB Cache, CHS=788/128/63
hdb: ATAPI 8X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
If starts spitting messages in the form of
VFS: Disk change detected on device ide0(3,64)
The behaviour seems to be triggered by some event, and if that happens the
only way to resolve == reboot
Second think is that the IrDA subsystem seems to have stopped working. I'm
looking into that (irattach goes fine, detection also, but no contact with
the device itself)
I'm going back to 2.4.4 to see if thing go better.
Igmar
--Igmar Palsenberg JDI Media Solutions
Boulevard Heuvelink 102 6828 KT Arnhem The Netherlands
mailto: i.palsenberg@jdimedia.nl PGP/GPG key : http://www.jdimedia.nl/formulier/pgp/igmar
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/