i dont usually like following up my own sensless ramblings, but here is an
interesting twist (probabally caused by my ill understanding of the issues
involved)
ive done the badblock test, and compiled a list of 2302 bad blocks on this
disk ... however, when running mke2fs -l badblocfile /dev/hdc1
i got this interesting errormessage for every one of the bad blocks :
Bad block 1006290 out of range; ignored.
mke2fs said my disk was my disk would be 132480 inodes, 264592 blocks in
size ...
some bits in proc (well this capacity one i dont know what it measures)
root:/root# cat /proc/ide/hdc/capacity
2116800
root:/root# cat /proc/ide/hdc/geometry
physical 2100/16/63
logical 525/64/63
is there a geometry problem ? whats causing bad blocks to give apparently
excessivly large bad blocks ...?
any ideas ?
Thanks,
Dave
> for a while now ive had a disk that causes errors to occur during reads,
> however, ive finally got round to doing a
>
> # badblocks -c 32 -o mybadblocks -w -v -s /dev/hdc
>
> so after one part of the test its found 2048 bad blocks, and dumped alot
of
> error messages, which look like this:
>
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=2116604,
> sector=2116604
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=2116604,
> sector=2116604
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=2116604,
> sector=2116604
> kernel: ide1: reset: success
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x01 { AddrMarkNotFound }, LBAsect=2116604,
> sector=2116604
> kernel: end_request: I/O error, dev 16:00 (hdc), sector 2116604
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x40 { UncorrectableError },
LBAsect=2116607,
> sector=2116607
> kernel: end_request: I/O error, dev 16:00 (hdc), sector 2116607
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x40 { UncorrectableError },
LBAsect=2116608,
> sector=2116608
> kernel: end_request: I/O error, dev 16:00 (hdc), sector 2116608
> kernel: hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> kernel: hdc: read_intr: error=0x40 { UncorrectableError },
LBAsect=2116610,
> sector=2116610
>
> i have tried the disk in 2 systems, one Socket7 pentium and a PII /w a BX
> chipset ... the only thing i can think this is is either a geometry
problem
> ?? or a hard disk failiure ...
>
> anyone got any ideas ?
>
> Thanks.
>
> Dave
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/