Hi,
2.4.5-ac[4678] all lock hard (no sysreq) when pushing my
power-button (setup from the bios to go to standby) or
when running apm --standby. (apm version 3.0final, RH6.2)
apm --suspend works the way it should.
2.4.5/2.4.6-pre1 don't hardlock.
lspci -vvxxx output and .config are attached.
Any ideas?
-- Linux 2.4.6-pre1 #2 Tue Jun 5 18:08:24 CEST 2001--vtzGhvizbBRQ85DL Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) Subsystem: ABIT Computer Corp.: Unknown device a401 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 05 03 06 00 10 22 02 00 00 06 00 08 00 00 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 01 a4 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d4000000-d5ffffff Prefetchable memory behind bridge: d6000000-d6ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 05 83 07 00 30 22 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 20: 00 d4 f0 d5 00 d6 f0 d6 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 86 06 87 00 10 02 22 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 71 05 07 00 90 02 10 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 07 00 10 02 10 00 03 0c 08 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 25 09 34 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 07 00 10 02 10 00 03 0c 08 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 25 09 34 12 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 12 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 57 30 00 00 90 02 30 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00
00:11.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 04) Subsystem: Creative Labs CT4850 SBLive! Value Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at dc00 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 11 02 00 05 00 90 02 04 00 01 04 00 20 80 00 10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 02 14
00:11.1 Input device controller: Creative Labs SB Live! (rev 01) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: I/O ports at e000 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 11 02 70 05 00 90 02 01 00 80 09 00 20 80 00 10: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller: Intel Corporation i740 (rev 21) (prog-if 00 [VGA]) Subsystem: CardExpert Technology: Unknown device 0100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d6000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at d5000000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=256K] Capabilities: [d0] AGP version 1.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 86 80 00 78 07 00 b0 02 21 00 00 03 00 00 00 00 10: 08 00 00 d6 00 00 00 d5 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b0 10 00 01 30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00
--vtzGhvizbBRQ85DL Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=config
CONFIG_X86=y CONFIG_ISA=y CONFIG_UID16=y CONFIG_EXPERIMENTAL=y CONFIG_MODULES=y CONFIG_KMOD=y CONFIG_MK7=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_NET=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_PM=y CONFIG_APM=y CONFIG_APM_RTC_IS_GMT=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_LOOP=m CONFIG_MD=y CONFIG_BLK_DEV_LVM=m CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_SYN_COOKIES=y CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_SCSI_IMM=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_MOUSE=y CONFIG_PSMOUSE=y CONFIG_RTC=y CONFIG_QUOTA=y CONFIG_REISERFS_FS=m CONFIG_FAT_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVPTS_FS=y CONFIG_EXT2_FS=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_SOUND=m CONFIG_SOUND_EMU10K1=m CONFIG_USB=m CONFIG_USB_DEVICEFS=y CONFIG_USB_UHCI=m CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y
--vtzGhvizbBRQ85DL-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/