Re: 2.4.5 panic while starting aic7xxx
Justin T. Gibbs (gibbs@scsiguy.com)
Wed, 30 May 2001 09:19:02 -0600
>SCSI subsystem driver Revision: 1.00
>PCI: Found IRQ 11 for device 00:0c.0
>scsi0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
> <Adaptec 2940 Ultra2 SCSI adapter>
> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
>ahc_intr: AWAITING_MSG for an SCB that does not have a waiting message
>SCSIID = 7, target_mask = 1
>Kernel panic: SCB = 3, SCB Control = 40, MSG_OUT = 80 SCB flags = 6000
>In interrupt handler - not syncing
This looks like the firmware file is not in sync with the rest
of the driver. Depending on the host environment, you may be
able to rebuild the firmware yourself. Just check the box in
the kernel config section for the aic7xxx driver to rebuild
the firmware.
--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/