a) I2C stuff got converted to module_init() nicely. That took
a lot of cruft away.
b) init order is preserved. However, that worked only because
none of the i2c initialization functions touch stuff from random.c
c) I had to put i2c before char to preserve the ordering.
Not a big deal, but I'm somewhat at loss here - how to do it without
really ugly drivers/Makefile. Suggestions?
d) if we set CONFIG_I2C to 'y' we don't include drivers/i2c
into subdir-m. However, having i2c-core in kernel and the rest done as
modules is OK with i2c itself. And I seriously suspect that it's
a common situation. Am I right assuming that correct way to deal with
that is to put i2c into mod-subdirs?
e) looks like rand_initialize() is in the same class as handling
VFS/VM/etc. caches - global infrastructure. It definitely should be
called before all other drivers. Notice that old device_init() was asking
for trouble - it called parport_init() before chr_dev_init() (which calls
rand_initialize()), so if somebody would try to feed some entropy into
pool during the parport_init() we would get an interesting (and hard
to understand) problem. Maybe we should move the call into basic_setup()?
Comments?
Very preliminary patch follows. Please, _don't_ apply it in that
form - drivers/Makefile is just too ugly.
Al
diff -urN S5-pre3-init-0/drivers/Makefile S5-pre3-init/drivers/Makefile
--- S5-pre3-init-0/drivers/Makefile Wed May 16 16:26:35 2001
+++ S5-pre3-init/drivers/Makefile Wed May 16 20:47:52 2001
@@ -9,8 +9,13 @@
mod-subdirs := dio mtd sbus video macintosh usb input telephony sgi i2o ide \
scsi md ieee1394 pnp isdn atm fc4 net/hamradio i2c acpi
-subdir-y := parport char block net sound misc media cdrom
-subdir-m := $(subdir-y)
+subdir-y := parport
+subdir-m := parport
+
+subdir-$(CONFIG_I2C) += i2c
+
+subdir-y += char block net sound misc media cdrom
+subdir-m += char block net sound misc media cdrom
subdir-$(CONFIG_DIO) += dio
@@ -40,7 +45,6 @@
# CONFIG_HAMRADIO can be set without CONFIG_NETDEVICE being set -- ch
subdir-$(CONFIG_HAMRADIO) += net/hamradio
-subdir-$(CONFIG_I2C) += i2c
subdir-$(CONFIG_ACPI) += acpi
include $(TOPDIR)/Rules.make
diff -urN S5-pre3-init-0/drivers/char/Makefile S5-pre3-init/drivers/char/Makefile
--- S5-pre3-init-0/drivers/char/Makefile Wed May 16 16:26:36 2001
+++ S5-pre3-init/drivers/char/Makefile Wed May 16 20:39:26 2001
@@ -16,7 +16,7 @@
O_TARGET := char.o
-obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
+obj-y += random.o mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
diff -urN S5-pre3-init-0/drivers/char/mem.c S5-pre3-init/drivers/char/mem.c
--- S5-pre3-init-0/drivers/char/mem.c Wed May 16 16:26:36 2001
+++ S5-pre3-init/drivers/char/mem.c Wed May 16 20:48:51 2001
@@ -26,9 +26,6 @@
#include <asm/io.h>
#include <asm/pgalloc.h>
-#ifdef CONFIG_I2C
-extern int i2c_init_all(void);
-#endif
#ifdef CONFIG_VIDEO_DEV
extern int videodev_init(void);
#endif
@@ -615,10 +612,6 @@
if (devfs_register_chrdev(MEM_MAJOR,"mem",&memory_fops))
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
memory_devfs_register();
- rand_initialize();
-#ifdef CONFIG_I2C
- i2c_init_all();
-#endif
#if defined (CONFIG_FB)
fbmem_init();
#endif
diff -urN S5-pre3-init-0/drivers/char/random.c S5-pre3-init/drivers/char/random.c
--- S5-pre3-init-0/drivers/char/random.c Wed May 16 16:26:36 2001
+++ S5-pre3-init/drivers/char/random.c Wed May 16 20:40:12 2001
@@ -1380,7 +1380,7 @@
}
}
-void __init rand_initialize(void)
+static int __init rand_initialize(void)
{
int i;
@@ -1404,7 +1404,10 @@
memset(&mouse_timer_state, 0, sizeof(struct timer_rand_state));
memset(&extract_timer_state, 0, sizeof(struct timer_rand_state));
extract_timer_state.dont_count_entropy = 1;
+ return 0;
}
+
+__initcall(rand_initialize);
void rand_initialize_irq(int irq)
{
diff -urN S5-pre3-init-0/drivers/i2c/i2c-algo-bit.c S5-pre3-init/drivers/i2c/i2c-algo-bit.c
--- S5-pre3-init-0/drivers/i2c/i2c-algo-bit.c Sun Apr 1 23:56:45 2001
+++ S5-pre3-init/drivers/i2c/i2c-algo-bit.c Wed May 16 20:54:07 2001
@@ -607,7 +607,7 @@
return 0;
}
-int __init i2c_algo_bit_init (void)
+static int __init i2c_algo_bit_init (void)
{
printk("i2c-algo-bit.o: i2c bit algorithm module\n");
return 0;
@@ -618,7 +618,6 @@
EXPORT_SYMBOL(i2c_bit_add_bus);
EXPORT_SYMBOL(i2c_bit_del_bus);
-#ifdef MODULE
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
@@ -631,12 +630,4 @@
MODULE_PARM_DESC(i2c_debug,
"debug level - 0 off; 1 normal; 2,3 more verbose; 9 bit-protocol");
-int init_module(void)
-{
- return i2c_algo_bit_init();
-}
-
-void cleanup_module(void)
-{
-}
-#endif
+module_init(i2c_algo_bit_init)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-algo-pcf.c S5-pre3-init/drivers/i2c/i2c-algo-pcf.c
--- S5-pre3-init-0/drivers/i2c/i2c-algo-pcf.c Fri Feb 16 22:53:49 2001
+++ S5-pre3-init/drivers/i2c/i2c-algo-pcf.c Wed May 16 21:02:17 2001
@@ -593,7 +593,6 @@
EXPORT_SYMBOL(i2c_pcf_add_bus);
EXPORT_SYMBOL(i2c_pcf_del_bus);
-#ifdef MODULE
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
@@ -607,12 +606,4 @@
"debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
-int init_module(void)
-{
- return i2c_algo_pcf_init();
-}
-
-void cleanup_module(void)
-{
-}
-#endif
+module_init(i2c_algo_pcf_init)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-core.c S5-pre3-init/drivers/i2c/i2c-core.c
--- S5-pre3-init-0/drivers/i2c/i2c-core.c Fri Feb 16 22:53:49 2001
+++ S5-pre3-init/drivers/i2c/i2c-core.c Wed May 16 21:08:53 2001
@@ -1276,58 +1276,6 @@
return 0;
}
-#ifndef MODULE
- extern int i2c_dev_init(void);
- extern int i2c_algo_bit_init(void);
- extern int i2c_bitlp_init(void);
- extern int i2c_bitelv_init(void);
- extern int i2c_bitvelle_init(void);
- extern int i2c_bitvia_init(void);
- extern int i2c_algo_pcf_init(void);
- extern int i2c_pcfisa_init(void);
-
-/* This is needed for automatic patch generation: sensors code starts here */
-/* This is needed for automatic patch generation: sensors code ends here */
-
-int __init i2c_init_all(void)
-{
- /* --------------------- global ----- */
- i2c_init();
-
-#ifdef CONFIG_I2C_CHARDEV
- i2c_dev_init();
-#endif
- /* --------------------- bit -------- */
-#ifdef CONFIG_I2C_ALGOBIT
- i2c_algo_bit_init();
-#endif
-#ifdef CONFIG_I2C_PHILIPSPAR
- i2c_bitlp_init();
-#endif
-#ifdef CONFIG_I2C_ELV
- i2c_bitelv_init();
-#endif
-#ifdef CONFIG_I2C_VELLEMAN
- i2c_bitvelle_init();
-#endif
-
- /* --------------------- pcf -------- */
-#ifdef CONFIG_I2C_ALGOPCF
- i2c_algo_pcf_init();
-#endif
-#ifdef CONFIG_I2C_ELEKTOR
- i2c_pcfisa_init();
-#endif
-/* This is needed for automatic patch generation: sensors code starts here */
-/* This is needed for automatic patch generation: sensors code ends here */
-
- return 0;
-}
-
-#endif
-
-
-
EXPORT_SYMBOL(i2c_add_adapter);
EXPORT_SYMBOL(i2c_del_adapter);
EXPORT_SYMBOL(i2c_add_driver);
@@ -1364,19 +1312,10 @@
EXPORT_SYMBOL(i2c_get_functionality);
EXPORT_SYMBOL(i2c_check_functionality);
-#ifdef MODULE
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
MODULE_PARM(i2c_debug, "i");
MODULE_PARM_DESC(i2c_debug,"debug level");
-int init_module(void)
-{
- return i2c_init();
-}
-
-void cleanup_module(void)
-{
- i2cproc_cleanup();
-}
-#endif
+module_init(i2c_init)
+module_exit(i2cproc_cleanup)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-dev.c S5-pre3-init/drivers/i2c/i2c-dev.c
--- S5-pre3-init-0/drivers/i2c/i2c-dev.c Fri Feb 16 22:53:49 2001
+++ S5-pre3-init/drivers/i2c/i2c-dev.c Wed May 16 20:52:30 2001
@@ -53,11 +53,6 @@
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
-#ifdef MODULE
-extern int init_module(void);
-extern int cleanup_module(void);
-#endif /* def MODULE */
-
/* struct file_operations changed too often in the 2.1 series for nice code */
static loff_t i2cdev_lseek (struct file *file, loff_t offset, int origin);
@@ -78,12 +73,7 @@
static int i2cdev_command(struct i2c_client *client, unsigned int cmd,
void *arg);
-#ifdef MODULE
-static
-#else
-extern
-#endif
- int __init i2c_dev_init(void);
+static int __init i2c_dev_init(void);
static int i2cdev_cleanup(void);
static struct file_operations i2cdev_fops = {
@@ -476,7 +466,7 @@
return -1;
}
-int __init i2c_dev_init(void)
+static int __init i2c_dev_init(void)
{
int res;
@@ -506,7 +496,7 @@
return 0;
}
-int i2cdev_cleanup(void)
+static int i2cdev_cleanup(void)
{
int res;
@@ -537,20 +527,9 @@
EXPORT_NO_SYMBOLS;
-#ifdef MODULE
+module_init(i2c_dev_init)
+module_exit(i2cdev_cleanup)
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C /dev entries driver");
-
-int init_module(void)
-{
- return i2c_dev_init();
-}
-
-int cleanup_module(void)
-{
- return i2cdev_cleanup();
-}
-
-#endif /* def MODULE */
diff -urN S5-pre3-init-0/drivers/i2c/i2c-elektor.c S5-pre3-init/drivers/i2c/i2c-elektor.c
--- S5-pre3-init-0/drivers/i2c/i2c-elektor.c Fri Feb 16 22:53:49 2001
+++ S5-pre3-init/drivers/i2c/i2c-elektor.c Wed May 16 21:03:58 2001
@@ -172,6 +172,7 @@
static void pcf_isa_exit(void)
{
+ i2c_pcf_del_bus(&pcf_isa_ops);
if (gpi.pi_irq > 0) {
disable_irq(gpi.pi_irq);
free_irq(gpi.pi_irq, 0);
@@ -274,7 +275,6 @@
EXPORT_NO_SYMBOLS;
-#ifdef MODULE
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
@@ -284,15 +284,5 @@
MODULE_PARM(own, "i");
MODULE_PARM(i2c_debug,"i");
-int init_module(void)
-{
- return i2c_pcfisa_init();
-}
-
-void cleanup_module(void)
-{
- i2c_pcf_del_bus(&pcf_isa_ops);
- pcf_isa_exit();
-}
-
-#endif
+module_init(i2c_pcfisa_init)
+module_exit(pcf_isa_exit)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-elv.c S5-pre3-init/drivers/i2c/i2c-elv.c
--- S5-pre3-init-0/drivers/i2c/i2c-elv.c Fri Feb 16 22:53:49 2001
+++ S5-pre3-init/drivers/i2c/i2c-elv.c Wed May 16 20:59:34 2001
@@ -117,6 +117,7 @@
static void bit_elv_exit(void)
{
+ i2c_bit_del_bus(&bit_elv_ops);
release_region( base , (base == 0x3bc)? 3 : 8 );
}
@@ -197,22 +198,11 @@
EXPORT_NO_SYMBOLS;
-#ifdef MODULE
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus adapter routines for ELV parallel port adapter")
;
MODULE_PARM(base, "i");
-int init_module(void)
-{
- return i2c_bitelv_init();
-}
-
-void cleanup_module(void)
-{
- i2c_bit_del_bus(&bit_elv_ops);
- bit_elv_exit();
-}
-
-#endif
+module_init(i2c_bitelv_init)
+module_exit(bit_elv_exit)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-philips-par.c S5-pre3-init/drivers/i2c/i2c-philips-par.c
--- S5-pre3-init-0/drivers/i2c/i2c-philips-par.c Fri Feb 16 16:22:55 2001
+++ S5-pre3-init/drivers/i2c/i2c-philips-par.c Wed May 16 20:56:58 2001
@@ -33,10 +33,6 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#ifndef __exit
-#define __exit __init
-#endif
-
static int type;
struct i2c_par
@@ -294,14 +290,5 @@
MODULE_PARM(type, "i");
-#ifdef MODULE
-int init_module(void)
-{
- return i2c_bitlp_init();
-}
-
-void cleanup_module(void)
-{
- i2c_bitlp_exit();
-}
-#endif
+module_init(i2c_bitlp_init)
+module_exit(i2c_bitlp_exit)
diff -urN S5-pre3-init-0/drivers/i2c/i2c-velleman.c S5-pre3-init/drivers/i2c/i2c-velleman.c
--- S5-pre3-init-0/drivers/i2c/i2c-velleman.c Fri Feb 16 06:27:19 2001
+++ S5-pre3-init/drivers/i2c/i2c-velleman.c Wed May 16 21:01:20 2001
@@ -105,6 +105,7 @@
static void bit_velle_exit(void)
{
+ i2c_bit_del_bus(&bit_velle_ops);
release_region( base , (base == 0x3bc)? 3 : 8 );
}
@@ -192,15 +193,5 @@
MODULE_PARM(base, "i");
-int init_module(void)
-{
- return i2c_bitvelle_init();
-}
-
-void cleanup_module(void)
-{
- i2c_bit_del_bus(&bit_velle_ops);
- bit_velle_exit();
-}
-
-#endif
+module_init(i2c_bitvelle_init)
+module_exit(bit_velle_exit)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/