Re: LANANA: To Pending Device Number Registrants

> The same situation appears when using bonding.o. For several years,
> Don Becker's (and derived) network drivers support changing MAC address
> when the interface is down. So Al's /dev/eth/<n>/MAC has different 
values
> depending on whether bonding is active or not. Should /dev/eth/<n>/MAC
> always have the original value (to be able to uniquely identify this 
card)
> or the in-use value (used by ARP, I believe) ? Or maybe have a
> /dev/eth/<n>/MAC_in_use ?

Token ring has the same problem as well, most token ring adapters support 
setting a LAA. 

Some solution would be useful though. Original mac sounds do-able.

Mike