Re: 3c900 card and kernel 2.4.3

[Juri Haberland]

Juri Haberland wrote:
> 
> Andrew Morton wrote:
> 
> > For non-modular drivers things are less easy.  If you
> > want to force it to use 10baseT (if_port zero) then
> > it should work OK if you cheat and use mem_start=0x400.
> > So `ether=0,0,0x400'.
> >
> > For BNC, it should work just fine with `ether=0,0,1'.
> > If it doesn't, please shout at me.   Compile the
> > driver with `static int vortex_debug = 7;' at line
> > 183 and send me the boot logs.
> 
> Hi Andrew,
> 
> I tried it with 'ether=0,0,1', 3 and also 7, but to no avail. The output
> of dmesg follows.

Oh, and I forgot to say, that the card is actually set to autoselection
in the EEPROM (I just had a look with the DOS tool).

Juri