In an abstract theoretical sense yes. Accidentally almost impossible.
> know is if there is any way to screw the board from software in such a way
> that power off and power on does not bring it up ?.
The only people are ever likely to do is to corrupt the CMOS, which is easily
cleared.
> Its a dual pentium-3 machine. The power supply is gone also, the power
> supply from the crashed machine does not bring up another normal computer,
> also power supply from normal computer does not bring up crashed computer.
Sounds like a rather more physical layer problem - like a power spike and
PSU failure.
BTW: Always put a voltmeter on a power supply before you swap it like that
to test it. You need to check the voltages under load look sane otherwise you
may end up using a failed PSU to blow up other motherboards which is a
rather expensive debugging error ;)
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/