Re: USB problems since 2.4.2

[josh]

> On Mon, Apr 23, 2001, josh <[e-mail]> wrote:
> > Kernel: 2.4.2 - latest (2.4.3-ac12)
> > Platform: x86 on mangled Slack7.1
> > Hardware: MSI 694D Pro-AR
> > ( http://www.msicomputer.com/products/detail.asp?ProductID=150 )
> > 
> > Problem: USB devices timeout on address assignment. Course thats with the
> > non JE driver, with the JE driver the bus doesnt even say that anything
> > gets connected.
> > 
> > when any device is plugged in:
> > *************************************
> > hub.c: USB new device connect on bus1/1, assigned device number 4
> > usb_control/bulk_msg: timeout
> > usb.c: USB device not accepting new address=4 (error=-110)
> > hub.c: USB new device connect on bus1/1, assigned device number 5
> > usb_control/bulk_msg: timeout
> > usb.c: USB device not accepting new address=5 (error=-110)
> > *************************************
> 
> Can you try booting your kernel with the "noapic" option and see if it
> still happens?
> 

DING DING DING!  that did the trick. Thnx!

                          www.mammoth.org/~skulcap
**********************************************BEGIN GEEK CODE BLOCK************
"Sometimes, if you're perfectly      * GCS d- s: a-- C++ ULSC++++$ P+ L+++ E--- 
still, you can hear the virgin       * W+(++) N++ o+ K- w--(---) O- M- V- PS-- 
weeping for the savior of your will."* PE Y+ PGP t+ 5 X+ R !tv b+>+++ DI++ D++  
 --DreamTheater, "Lines in the Sand" * G e h+ r-- y-   (www.geekcode.com)
**********************************************END GEEK CODE BLOCK**************