OOPS report for L2 cacheable size setting at 512MB on TD5TH dual P200
[2.] Full description of the problem/report:
My system board BIOS has two settings for L2 cacheable size: 64MB and
512MB. Previous kernels would lock when initialising the
framebuffer. This one initialises framebuffer but crashes later.
[3.] Keywords (i.e., modules, networking, kernel):
kernel initialisation
[4.] Kernel version (from /proc/version):
Linux version 2.4.3cc (root@heathen) (gcc version 2.95.3 20010315
(Debian release)) #1 SMP Fri Mar 30 14:22:48 PST 2001
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
ksymoops 2.3.7 on i586 2.4.3cc. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3cc/ (default)
-m /boot/System.map-2.4.3cc (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Warning (compare_maps): ksyms_base symbol
__VERSIONED_SYMBOL(cuecat_process_scancode) not found in System.map.
Ignoring ksyms_base entry
Warning (compare_maps): snd symbol pm_register not found in
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o. Ignoring
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o entry
Warning (compare_maps): snd symbol pm_send not found in
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o. Ignoring
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o entry
Warning (compare_maps): snd symbol pm_unregister not found in
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o. Ignoring
/usr/lib/alsa-modules/2.4.3cc/0.5/snd.o entry
Reading Oops report from the terminal
Unable to handle kernel paging request at virtual address 418146e0
c02f5407
*pde = 00000000
Oops: 0002
CPU: 1
EIP: 0010:[<c02f5407>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: c02f5468 ebx: c02f53fc ecx: c02f53f4 edx: c02f53f4
esi: c02f5404 edi: 00000000 ebp: c02ecc60 esp: c1229ef8
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c1229000)
Stack: c011db55 c02f53fc c03056a0 00000020 00000000 c02ecc60 c018021e
00000286
c122bda0 c011a4be c03056a0 00000020 c011a3a7 00000000 00000001
c02ed060
00000020 0000000e c011a24d c02ed060 c0305a00 c02ea9c0 0000000e
c1229f74
Call Trace: [<c011db55>] [<c018021e>] [<c011a4be>] [<c011a3a7>]
[<c011a24d>] [<c01089aa>] [<c010517
[<c0107050>] [<c0105170>] [<c010519c>] [<c0105202>] [<c011a24d>]
[<c01089aa>]
Code: c0 04 54 2f c0 0c 54 2f c0 0c 54 2f c0 f4 53 2f c0 68 60 2a
>>EIP; c02f5407 <tv1+207/804> <=====
Trace; c011db55 <timer_bh+281/2dc>
Trace; c018021e <ide_intr+12a/194>
Trace; c011a4be <bh_action+46/a4>
Trace; c011a3a7 <tasklet_hi_action+4f/7c>
Trace; c011a24d <do_softirq+5d/8c>
Trace; c01089aa <do_IRQ+ea/fc>
Trace; c0107050 <ret_from_intr+0/20>
Trace; c0105170 <default_idle+0/34>
Trace; c010519c <default_idle+2c/34>
Trace; c0105202 <cpu_idle+3e/54>
Trace; c011a24d <do_softirq+5d/8c>
Trace; c01089aa <do_IRQ+ea/fc>
Code; c02f5407 <tv1+207/804>
0000000000000000 <_EIP>:
Code; c02f5407 <tv1+207/804> <=====
0: c0 04 54 2f rolb $0x2f,(%esp,%edx,2) <=====
Code; c02f540b <tv1+20b/804>
4: c0 0c 54 2f rorb $0x2f,(%esp,%edx,2)
Code; c02f540f <tv1+20f/804>
8: c0 0c 54 2f rorb $0x2f,(%esp,%edx,2)
Code; c02f5413 <tv1+213/804>
c: c0 (bad)
Code; c02f5414 <tv1+214/804>
d: f4 hlt
Code; c02f5415 <tv1+215/804>
e: 53 push %ebx
Code; c02f5416 <tv1+216/804>
f: 2f das
Code; c02f5417 <tv1+217/804>
10: c0 68 60 2a shrb $0x2a,0x60(%eax)
Kernel panic: Aiee, killing interrupt handler!
5 warnings issued. Results may not be reliable.
[6.] A small shell script or example program which triggers the
problem (if possible)
TMC TD5TH v1.1 motherboard. L2 cacheable size set to 512MB in the
BIOS. SMP configuration.
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 4
cpu MHz : 199.434
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
processor : 1
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 4
cpu MHz : 199.434
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
[7.3.] Module information (from /proc/modules):
No modules loading at the time it crashes.
[7.4.] Loaded driver and hardware information (/proc/ioports,
/proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0220-022f : Sound Blaster 16
0240-024f : Sound Blaster AWE32/64
02e8-02ef : serial(set)
02f8-02ff : serial(set)
0300-0301 : Sound Blaster AWE32/64 - MPU-401
0330-0331 : Sound Blaster 16 - MPU-401
0376-0376 : ide1
0388-038b : Sound Blaster 16 - FM
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
03f8-03ff : serial(set)
0620-0623 : Sound Blaster AWE32/64 - WaveTable
0a20-0a23 : Sound Blaster AWE32/64 - WaveTable
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
0e20-0e23 : Sound Blaster AWE32/64 - WaveTable
6000-601f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
6000-601f : usb-uhci
6100-61ff : Adaptec AHA-7850
6200-627f : Digital Equipment Corporation DECchip 21140 [FasterNet]
6200-627f : eth0
6300-63ff : ATI Technologies Inc 3D Rage Pro 215GP
f000-f00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
f000-f007 : ide0
f008-f00f : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000ca7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-00235c3f : Kernel code
00235c40-002acfff : Kernel data
e0000000-e0ffffff : ATI Technologies Inc 3D Rage Pro 215GP
e0000000-e0ffffff : atyfb
e1000000-e1ffffff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
e2000000-e27fffff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
e2800000-e2803fff : Matrox Graphics, Inc. MGA 2164W [Millennium II]
e2804000-e280407f : Digital Equipment Corporation DECchip 21140
[FasterNet]
e2804000-e280407f : eth0
e2805000-e2805fff : Adaptec AHA-7850
e2805000-e2805fff : aic7xxx
e2806000-e2806fff : ATI Technologies Inc 3D Rage Pro 215GP
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 430HX - 82439HX TXC [Triton II]
(rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR-
Latency: 32
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] (rev 01) (prog-if 00
[UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 6000 [size=32]
00:08.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 6100 [disabled] [size=256]
Region 1: Memory at e2805000 (32-bit, non-prefetchable)
[size=4K]
00:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
Subsystem: Netgear FA310TX Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 6200 [size=128]
Region 1: Memory at e2804000 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at <unassigned> [disabled] [size=256K]
00:0a.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
215GP (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 6300 [size=256]
Region 2: Memory at e2806000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W
[Millennium II] (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 1300
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e1000000 (32-bit, prefetchable) [disabled]
[size=16M]
Region 1: Memory at e2800000 (32-bit, non-prefetchable)
[disabled] [size=16K]
Region 2: Memory at e2000000 (32-bit, non-prefetchable)
[disabled] [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DNES-309170 Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: SONY Model: CD-ROM CDU-8005 Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: SONY Model: CD-ROM CDU-8005 Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
The last few lines of console log:
Mounted devfs on /dev
Freeing unused kernel memory: 224k freed
Unable to handle kernel paging request at virtual address 418146e0
printing eip:
c02f5407
*pde = 00000000
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/