The new aic7xxx driver included with 2.4.3 doesn't appear to be
working properly with my setup. While the previous driver worked
flawlessly, the new code doesn't set up all of my scsi devices. This
is an excerpt from kernel messages as produced by the 2.4.2 driver:
: (scsi0) <Adaptec AIC-7850 SCSI host adapter> found at PCI 0/11/0
: (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
: (scsi0) Downloading sequencer code... 415 instructions downloaded
: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.2.1/5.2.0
: <Adaptec AIC-7850 SCSI host adapter>
: (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 8.
: Vendor: PIONEER Model: DVD-ROM DVD-303R Rev: 2.00
: Type: CD-ROM ANSI SCSI revision: 02
: (scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15.
: Vendor: TEAC Model: CD-R55S Rev: 1.0F
: Type: CD-ROM ANSI SCSI revision: 02
: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
: Uniform CD-ROM driver Revision: 3.12
: sr1: scsi-1 drive
With the new driver it looks like this:
: SCSI subsystem driver Revision: 1.00
: ahc_pci:0:11:0: Host Adapter Bios disabled. Using default SCSI
device parameters
: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
: <Adaptec 2902/04/10/15/20/30C SCSI adapter>
: aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
:
: Vendor: TEAC Model: CD-R55S Rev: 1.0F
: Type: CD-ROM ANSI SCSI revision: 02
: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
: (scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
: sr0: scsi-1 drive
: Uniform CD-ROM driver Revision: 3.12
Same results with the 6.1.8 driver revision.
Thanks,
-- ---------------------------------------------------------------------- christian zander paranoia, n.: a healthy understanding zander@hdz.uni-dortmund.de of the way the universe works. ----------------------------------------------------------------------- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/