Re: VIA IDE driver status ?

[Glenn C. Hofmann]

I am not sure if this applies in your case, but I was getting problems
such as this on my Abit KT7-RAID and had the correct cables, also.  One
day, on a hunch after reading a post from Alan about overclocking, I
took my Athlon 750 down to 850 from 1.05 GHz and all is working great
now.  If your overclocking, I would suggest not doing so (at least not
so much), based on my experience.  I am also using the v4.0 driver.

Chris

  On 31 Mar 2001 00:41:32 -0300, Frédéric L. W. Meunier wrote:
> Hi. I really can't get UDMA66 with the VIA driver. I tried
> everything, also a new motherboard (ASUS A7Pro) with a
> ATA100/ATA66 cable (using both ends...)!
> 
> All I get are the usual CRC error messages.
> 
> So, there's no UDMA66 for any vt82c686a ? I'm using 2.4.3.
> 
> If there's no UDMA66, what are the advantages using this
> driver ?
> 
> TIA.
> 
> -- 
> 0@pervalidus.{net, {dyndns.}org} Tel: [phone] (Niterói-RJ BR)
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/