> > 2001-03-29 10:02:50.054774500 {kern|info} kernel: ad1848/cs4248 codec
> > driver Copyright (C) by Hannu Savolainen 1993-1996
> > 2001-03-29 10:02:50.070692500 {kern|notice} kernel: opl3sa2: No cards
> > found 2001-03-29 10:02:50.070703500 {kern|notice} kernel: opl3sa2: 0 PnP
> > card(s) found.
> Add 'isapnp=0' to the end of the options in your modules.conf.
> I *believe* this is fixed in a later kernel (2.4.3pre or 2.4.2ac).
If I am doing this, I can't even load the module and I get the following
message in syslog:
2001-03-29 18:13:14.184156500 {kern|err} kernel: opl3sa2: Control I/O port
0x0 not free
What is that "control i/o port"? Is this normally 0x100? What is the module
parameter to specify this io port? The documentation only mentions "io",
"mpu_io" and "mss_io" but I have specified these parameters already:
modprobe opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
isapnp=0
-- Bye, K [a735 47ec d87b 1f15 c1e9 53d3 aa03 6173 a723 e391] (Finger k@ailis.de to get public key) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/