>>Loading I2O core - (c) Copyright 1999 Read Hat Software
>>i2o: Checking for PCI I2O controllers...
>>PCI: Found IRQ5 for device 00:0a.1
>>i2o: I2O Controller on bus 0 at 81
>>i2o: PCI I2O controller at 0xE3000000 size=4194304
>>i2o/iop0: Installed at IRQ5
>>i2o: 1 I2O controller found and installed
>>Activating I2O controllers...
>>This may take few minutes if you have many devices
>>i2o/iop0: Reset rejected, trying to clear
>>i2o/iop0: LCT has 6 entries
>>i2o/iop0: Configuration dialog desired.
>>Target ID 0.
>> Vendor: Wind River Sys.
>> Device: IxWorks
>> Rev: 0201
>> class: executive
>> subclass: 0x0001
>> Flags: PM
>>Target ID 8.
>> Vendor: PROMISE TECH.
>> Device: I2O RAID ISM
>> Rev: V1.0.0
>> Class: Device Driver Module
>> Subclass:0x0021
>> Flags: PM
>>Target ID 9.
>> Vendor: PROMISE TECH.
>> Device: I2O IDE HDM
>> Rev: 0.02
>> Class: Device Driver Module
>> Subclass:0x0020
>> Flags: PM
>>Target ID 10.
>> Vendor: Seagate
>> Device: Technology 1275 M
>> Rev: 1.35
>> Class: Block Device
>> Subclass:0x0000
>> Flags: CPM
>>Target ID 14.
>> Vendor: PROMISE TECH.
>> Device: I2O RAID DEVICE
>> Rev: V1.0.0
>> Class: Block Device
>> Subclass:0x0000
>> Flags: PM
>>Target ID 15.
>> Vendor: WD
>> Device: AC31200F
>> Rev: 14.04E28
>> Class: Block Device
>> Subclass:0x0000
>> Flags: CPM
>>I2O Configuration Manager v 0.04
>> (c) Copyright 1999 Read Hat Software
>>I2O Block Storage OSM v0.9
>> (c) Copyright 1999, 2000 Read Hat Software.
>>i2o/iop0: No handler for event (0x02000000)
>>i2o_block: Controller 0 TID 14
>>Device Refused Claim! Skipping Installation
That is last line on console. Nothing of this actually make it
to the syslog.
Thanks David
ksymoops 2.3.7 on i686 2.4.2-ac1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.2-ac1/ (default)
-m /boot/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
No modules in ksyms, skipping objects
Warning (read_lsmod): no symbols in lsmod, is /proc/modules a valid lsmod
file?
invalid operand: 0000
CPU: 0
EIP: 0010:[<c01110e4>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010086
eax: 0000001b ebx: c7f99760 ecx: 00000001 edx: c02477c8
esi: 0000c204 edi: c025a000 ebp: c025beac esp: c025be7c
Process swapper(pid:0, stackpage=c0259000)
Stack: c01fa2ab c01fa416 000002c3 c7f99760 0000c204 c1272af8 00000044
00000082
00000000 c7f99760 00000000 c01b3bce c1272aa0 c01b3c6c c7f99760
c7f99760
00000001 00000053 c01b385f c7f99760 c7f99760 c0255640 00000001
c029272a
Call Trace: [<c01b3bce>] [<c01b3c6c>] [<c01b385f>] [<c01b4f44>]
[<c01b4f76>] [<c011b0fe>] [<c011b4bf>] [<c0189a0d>]
[<c0189aa1>] [<c01894f9>] [<c018a49d>] [<c018a50f>]
[<c0109f6d>] [<c010a0ce>] [<c0107120>] [<c0107120>]
[<c0108e00>] [<c0107120>] [<c0107120>] [<c0100018>]
[<c0107143>] [<c01071a9>] [<c0105000>] [<c0100191>]
Code: 0f 0b 8d 65 dc 5b 5e 5f 89 ec 5d c3 55 89 e5 83 ec 10 57 56
>>EIP; c01110e4 <schedule+388/394> <=====
Trace; c01b3bce <i2o_status_get+52/100>
Trace; c01b3c6c <i2o_status_get+f0/100>
Trace; c01b385f <i2o_quiesce_controller+f/7c>
Trace; c01b4f44 <i2o_reboot_event+28/94>
Trace; c01b4f76 <i2o_reboot_event+5a/94>
Trace; c011b0fe <notifier_call_chain+1e/38>
Trace; c011b4bf <ctrl_alt_del+17/38>
Trace; c0189a0d <boot_it+5/8>
Trace; c0189aa1 <do_spec+31/34>
Trace; c01894f9 <handle_scancode+28d/2c8>
Trace; c018a49d <handle_kbd_event+111/174>
Trace; c018a50f <keyboard_interrupt+f/14>
Trace; c0109f6d <handle_IRQ_event+35/60>
Trace; c010a0ce <do_IRQ+6e/b0>
Trace; c0107120 <default_idle+0/28>
Trace; c0107120 <default_idle+0/28>
Trace; c0108e00 <ret_from_intr+0/20>
Trace; c0107120 <default_idle+0/28>
Trace; c0107120 <default_idle+0/28>
Trace; c0100018 <startup_32+18/139>
Trace; c0107143 <default_idle+23/28>
Trace; c01071a9 <cpu_idle+41/54>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0100191 <L6+0/2>
Code; c01110e4 <schedule+388/394>
00000000 <_EIP>:
Code; c01110e4 <schedule+388/394> <=====
0: 0f 0b ud2a <=====
Code; c01110e6 <schedule+38a/394>
2: 8d 65 dc lea 0xffffffdc(%ebp),%esp
Code; c01110e9 <schedule+38d/394>
5: 5b pop %ebx
Code; c01110ea <schedule+38e/394>
6: 5e pop %esi
Code; c01110eb <schedule+38f/394>
7: 5f pop %edi
Code; c01110ec <schedule+390/394>
8: 89 ec mov %ebp,%esp
Code; c01110ee <schedule+392/394>
a: 5d pop %ebp
Code; c01110ef <schedule+393/394>
b: c3 ret
Code; c01110f0 <__wake_up+0/a8>
c: 55 push %ebp
Code; c01110f1 <__wake_up+1/a8>
d: 89 e5 mov %esp,%ebp
Code; c01110f3 <__wake_up+3/a8>
f: 83 ec 10 sub $0x10,%esp
Code; c01110f6 <__wake_up+6/a8>
12: 57 push %edi
Code; c01110f7 <__wake_up+7/a8>
13: 56 push %esi
2 warnings issued. Results may not be reliable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/