Re: Problem creating filesystem

[Guest section DW]

On Mon, Feb 26, 2001 at 06:48:16PM -0500, Carlos Fernandez Sanz wrote:

> I have just purchased a new HD and I'm getting problems creating a
> filesystem for it.  The HD is a Maxtor 80 Gb
> 
> Disk /dev/hde: 16 heads, 63 sectors, 15871 cylinders
> Units = cylinders of 1008 * 512 bytes
> 
>    Device Boot    Start       End    Blocks   Id  System
> /dev/hde1             1     15871   7998952+  83  Linux
> 
> Command (m for help): w
> The partition table has been altered!
> 
> Calling ioctl() to re-read partition table.
> 
> Syncing disks.
> ------------------
> When trying to create the filesystem, I get this:
> 
> [root@alhambra /sbin]# ./mke2fs /dev/hde1
> mke2fs 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
> /dev/hde1: Invalid argument passed to ext2 library while setting up
> superblock
> -------------------
> 
> I'm using
> Linux version 2.2.17-14 ([e-mail])

Reboot. Look at the boot messages. You should see your disk mentioned
and the partitions listed (hde: hde1).
If they disappear too quickly, say "dmesg | grep hde".

Test the size of hde1 with "blockdev --getsize /dev/hde1"
or "fdisk -s /dev/hde1" or so. If you get 0 that explains
the mke2fs error.

Make sure your tools are up to date. Old versions often have
an overflow somewhere.