On Thu, Feb 22, 2001 at 12:50:52AM +0000, Alan Cox wrote:
> > I just oldconfiged linux kernel with my 2.4.1 .config. When I boot the=
new
> > 2.4.1-ac20 kernel, I get a message saying that my ext2 superblock is co=
rrup=3D
> > ted.
> > I get a message asking me to run e2fsck -b 8193 <...hdd dev..>
> > My 2.4.0-ac4 that I've been running for more than 2-3 weeks now has no =
prob=3D
> > lems
> > booting though.
> >=20
> > What am I doing wrong ? I would be glad to give more info.
>=20
> Sounds like a driver change broke the handling for your disks or re-order=
ed
> them.=20
>=20
> What hardware
e2fsprogs version : e2fsprogs-1.18-1
cat /proc/partitions
[psubash@psubash[ttypts/0]/tmp]$ cat /proc/partitions =
[05:11pm/02-2=
1-01]
major minor #blocks name
3 0 20044080 hda
3 1 2048256 hda1
3 2 3076447 hda2
3 3 128520 hda3
3 4 14787832 hda4
[psubash@psubash[ttypts/0]/proc]$ cat interrupts =
[05:14pm/02-2=
1-01]
CPU0
0: 448484 XT-PIC timer
1: 12572 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 9908 XT-PIC eth0
9: 0 XT-PIC usb-uhci
10: 222641 XT-PIC EMU10K1
12: 31073 XT-PIC PS/2 Mouse
14: 264281 XT-PIC ide0
15: 4 XT-PIC ide1
NMI: 0
ERR: 0
[psubash@psubash[ttypts/0]/proc]$ cat filesystems =
[05:15pm/02-2=
1-01]
nodev sockfs
nodev shm
nodev pipefs
nodev proc
ext2
iso9660
nodev autofs
nodev nfs
nodev devpts
[psubash@psubash[ttypts/0]/proc]$ cat mounts =
[05:14pm/02-2=
1-01]
/dev/root / ext2 rw 0 0
/proc /proc proc rw 0 0
/dev/hda4 /home ext2 rw 0 0
/dev/hda2 /usr ext2 rw 0 0
none /dev/pts devpts rw 0 0
[psubash@psubash[ttypts/0]/proc]$ cat devices =
[05:15pm/02-2=
1-01]
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
128 ptm
136 pts
162 raw
180 usb
202 cpu/msr
203 cpu/cpuid
Block devices:
2 fd
3 ide0
22 ide1
cat /proc/cpuinfo
[psubash@psubash[ttypts/0]/tmp]$ cat /proc/cpuinfo =
[05:11pm/02-2=
1-01]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 548.743
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov =
pat pse36 mmx fxsr sse
bogomips : 1094.45
disk info
[psubash@psubash[ttypts/0]~]$ sudo hdparm -gi /dev/hda =
[05:03pm/02-2=
1-01]
/dev/hda:
geometry =3D 2495/255/63, sectors =3D 40088160, start =3D 0
Model=3DIBM-DPTA-372050, FwRev=3DP76OA30A, SerialNo=3DJMYJMHL1856
Config=3D{ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=3D16383/16/63, TrkSize=3D0, SectSize=3D0, ECCbytes=3D34
BuffType=3D3(DualPortCache), BuffSize=3D1961kB, MaxMultSect=3D16, MultSect=
=3Doff
DblWordIO=3Dno, maxPIO=3D2(fast), DMA=3Dyes, maxDMA=3D2(fast)
CurCHS=3D16383/16/63, CurSects=3D16514064, LBA=3Dyes
LBA CHS=3D1023/256/63 Remapping, LBA=3Dyes, LBAsects=3D40088160
tDMA=3D{min:120,rec:120}, DMA modes: mword0 mword1 mword2
IORDY=3Don/off, tPIO=3D{min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 *mode2
lspci -vvxx output
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (r=
ev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort+ >SERR- <PERR-
Latency: 64 set
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=3D64M]
Capabilities: <available only to root>
00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev=
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 128 set
Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency=3D64
Memory behind bridge: f4100000-f4ffffff
Prefetchable memory behind bridge: fc000000-fdffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 1f 01 20 02 03 00 04 06 00 80 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22
20: 10 f4 f0 f4 00 fc f0 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8c 00
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 0 set
00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-i=
f 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at 10c0 [size=3D16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: c1 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-=
if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1080 [size=3D32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0e.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 0=
7)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 2 min, 20 max, 64 set
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 10a0 [size=3D32]
Capabilities: <available only to root>
00: 02 11 02 00 05 01 90 02 07 00 01 04 00 40 80 00
10: a1 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 27 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 02 14
00:0e.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 0: I/O ports at 10d0 [size=3D8]
Capabilities: <available only to root>
00: 02 11 02 70 05 01 90 02 07 00 80 09 00 40 80 00
10: d1 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (r=
ev 30)
Subsystem: 3Com Corporation: Unknown device 9055
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 10 min, 10 max, 80 set, cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1000 [size=3D128]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D128K]
Capabilities: <available only to root>
00: b7 10 55 90 17 01 10 02 30 00 00 02 08 50 00 00
10: 01 10 00 00 00 00 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0a 0a
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev =
04) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SDRAM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 16 min, 32 max, 128 set, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=3D32M]
Region 1: Memory at f4100000 (32-bit, non-prefetchable) [size=3D16K]
Region 2: Memory at f4800000 (32-bit, non-prefetchable) [size=3D8M]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: <available only to root>
00: 2b 10 25 05 07 00 90 02 04 00 00 03 08 80 00 00
10: 08 00 00 fc 00 00 10 f4 00 00 80 f4 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 38 03
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 10 20
--=20
Prasanna Subash --- psubash@turbolinux.com --- TurboLinux, INC
------------------------------------------------------------------------
Linux, the choice | I give you the man who -- the man who --
of a GNU generation -o) | uh, I forgets the man who? -- Beauregard=20
Kernel 2.4.0-ac4 /\\ | Bugleboy=20
on a i686 _\\_v |=20
|=20
------------------------------------------------------------------------
--Y5rl02BVI9TCfPar
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.2 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE6lGiF5UrYeFg/7bURAsGkAJ91sUe7maUR1MOU3KEolHbEaF8sfACgoQf8
KQhJ7AhTbS0vq6m87S0Ej88=
=y8H/
-----END PGP SIGNATURE-----
--Y5rl02BVI9TCfPar--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/