RE: netdev issues (3c905B)

[Vibol Hou]

Hi Martin,

Here's /proc/interrupts:

           CPU0       CPU1
  0:    2748043    2754927    IO-APIC-edge  timer
  1:          2          0    IO-APIC-edge  keyboard
  2:          0          0          XT-PIC  cascade
  4:       2737       2892    IO-APIC-edge  serial
 17:    9573612    9568840   IO-APIC-level  eth0
 18:     483436     482421   IO-APIC-level  aic7xxx
NMI:    5505505    5505399
LOC:    5502609    5502508
ERR:          0

-Vibol

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]]On Behalf Of Martin Moerman
Sent: Tuesday, February 20, 2001 4:22 PM
To: Vibol Hou
Cc: Linux-Kernel
Subject: Re: netdev issues (3c905B)

Vibol,

I see that the card is on IRQ 17 ???

can you send us /proc/interrupts

/Martin

On Tue, 20 Feb 2001, Vibol Hou wrote:

> Hi,
>
> I have some problems on a heavily loaded web server.  The first is that
the
> kernel is spitting out a bunch of "NETDEV WATCHDOG: eth0: transmit timed
> out" errors.  I do not recall this happening in 2.4.0 under the same
> conditions.
>
> Another problem that I seem to have, of which I have had reports from
> clients, is that the server has problems talking to clients using modems
> This didn't occur before with the 2.2 series kernel (all other things held
> constant).  It seems each time a client tries to load up any site on the
> server, the connection will just die (or stall).  This does not apply to
> high-bandwidth connections (DSL and up) since everything seems fine on DSL
> and faster, but I tried connecting using my dial-up account with
Earthlink,
> and the reports seem to be true.  Can those of you on a 56k modem try
> connecting to http://khmerconnection.com and see if the page loads?
Apache
> isn't the only service affected.  It seems *any* TCP communication runs
like
> a turtle (even SSH.  takes minutes to login, then minutes to echo each
> letter.  doesn't do this on a DSL connection from the same computer).
>
> The card that is exhibiting this problem is a 3c905B (lspci below):
>
> 00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
> (rev 30)
>         Subsystem: 3Com Corporation: Unknown device 9055
>         Flags: bus master, medium devsel, latency 80, IRQ 17
>         I/O ports at e400 [size=128]
>         Memory at e8001000 (32-bit, non-prefetchable) [size=128]
>         Expansion ROM at e4000000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 1
>
> dmesg shows hordes of these at high peak usage (300KBps+):
>
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: transmit timed out, tx_status 00 status e601.
>   diagnostics: net 0cd8 media 8880 dma 0000003a.
> eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
>   Flags; bus-master 1, full 0; dirty 9256291(3) current 9256291(3).
>   Transmit list 00000000 vs. f7de5230.
>   0: @f7de5200  length 80000042 status 00010042
>   1: @f7de5210  length 8000004a status 8001004a
>   2: @f7de5220  length 80000036 status 80010036
>   3: @f7de5230  length 80000036 status 00010036
>   4: @f7de5240  length 80000042 status 00010042
>   5: @f7de5250  length 80000036 status 00010036
>   6: @f7de5260  length 800005ea status 000105ea
>   7: @f7de5270  length 800005ea status 000105ea
>   8: @f7de5280  length 8000003a status 0001003a
>   9: @f7de5290  length 8000003e status 0001003e
>   10: @f7de52a0  length 8000003a status 0001003a
>   11: @f7de52b0  length 8000003e status 0001003e
>   12: @f7de52c0  length 8000003e status 0001003e
>   13: @f7de52d0  length 8000004a status 0001004a
>   14: @f7de52e0  length 8000004a status 0001004a
>   15: @f7de52f0  length 8000003e status 0001003e
> eth0: Resetting the Tx ring pointer.
>
> Any ideas?
>
> Thanks,
> --
> Vibol Hou
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>