sym53c875-0:0: ERROR (0:18) (1-21-4d) (f/3d) @ (script 820:11000000).
sym53c875-0: script cmd = 11000000
sym53c875-0: regdump: da 10 c0 3d 47 0f 00 07 46 01 80 21 80 01 01 00 00 80 d1 0f 08 ff ff ff.
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
sym53c875-0-<0,0>: wide msgout: 1-2-3-1.
sym53c875-0-<0,0>: wide msgin: 1-2-3-1.
sym53c875-0-<0,0>: wide: wide=1 chg=0.
sym53c875-0-<0,0>: wide msgout: 1-2-3-1.
sym53c875-0-<0,0>: wide msgin: 1-2-3-1.
sym53c875-0-<0,0>: wide: wide=1 chg=0.
sym53c875-0-<0,0>: sync msgout: 1-3-1-19-10.
sym53c875-0-<0,0>: sync msg in: 1-3-1-19-f.
sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0.
sym53c875-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
sym53c875-0-<1,0>: wide msgout: 1-2-3-1.
sym53c875-0-<1,0>: wide msgin: 1-2-3-1.
sym53c875-0-<1,0>: wide: wide=1 chg=0.
sym53c875-0-<1,0>: wide msgout: 1-2-3-1.
sym53c875-0-<1,0>: wide msgin: 1-2-3-1.
sym53c875-0-<1,0>: wide: wide=1 chg=0.
sym53c875-0-<1,0>: sync msgout: 1-3-1-19-10.
sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f.
sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0.
sym53c875-0-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
dmesg output is attached.
kernel 2.4.1
Hendrik
-- Perfection is our goal, excellence will be tolerated. -- J. Yahl ## Linux 2.4.1-ac14 running on an i586 ##--sm4nu43k4a2Rpi4c Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg
@ 000000000fff0000 (ACPI NVS) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f5ae0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bootup CPU Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 0, IRQ 20, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 28, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 2c, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10 Int: type 2, pol 3, trig 1, bus 2, IRQ 00, APIC ID 2, APIC INT 17 Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: auto BOOT_IMAGE=2.4.1 ro root=802 video=matrox:vesa:0x118,vf:85 Initializing CPU#0 Detected 266.680 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 532.48 BogoMIPS Memory: 254652k/262080k available (1447k kernel code, 7040k reserved, 506k data, 248k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 CPU: Common caps: 0080fbff 00000000 00000000 00000000 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 CPU: Common caps: 0080fbff 00000000 00000000 00000000 CPU0: Intel Pentium II (Klamath) stepping 04 per-CPU timeslice cutoff: 1464.17 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 CPU#1 (phys ID: 1) waiting for CALLOUT Startup point 1. Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 532.48 BogoMIPS Stack at about c1449fbc CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 CPU: Common caps: 0080fbff 00000000 00000000 00000000 OK. CPU1: Intel Pentium II (Klamath) stepping 04 CPU has booted. Before bogomips. Total of 2 processors activated (1064.96 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. number of MP IRQ sources: 22. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 91 0f 003 03 0 0 0 0 0 1 1 99 10 003 03 1 1 0 1 0 1 1 A1 11 003 03 1 1 0 1 0 1 1 A9 12 003 03 1 1 0 1 0 1 1 B1 13 003 03 1 1 0 1 0 1 1 B9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ10 -> 10 IRQ11 -> 11 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 266.6706 MHz. ..... host bus clock speed is 66.6673 MHz. cpu: 0, clocks: 666673, slice: 222224 CPU0<T0:666672,T1:444448,D:0,S:222224,C:666673> cpu: 1, clocks: 666673, slice: 222224 CPU1<T0:666672,T1:222224,D:0,S:222224,C:666673> checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go PCI: PCI BIOS revision 2.10 entry at 0xfaff0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 16 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I10,P0) -> 18 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: Calling quirk for 01:00 isapnp: SB audio device quirk - increasing port range isapnp: Calling quirk for 01:02 isapnp: AWE32 quirk - adding two ports isapnp: Card 'Creative SB AWE32 PnP' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket DMI 2.1 present. 30 structures occupying 845 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 10/30/98 Board Vendor: Gigabyte Technology Co. Ltd.. Board Name: i440BX-W977. Board Version: . Starting kswapd v1.8 0x278: FIFO is 16 bytes 0x278: writeIntrThreshold is 16 0x278: readIntrThreshold is 16 0x278: PWord is 8 bits 0x278: Interrupts are ISA-Pulses 0x278: ECP port cfgA=0x10 cfgB=0x78 0x278: ECP settings irq=5 dma=<none or set by other means> parport0: PC-style at 0x278 (0x678) [PCSPP,TRISTATE,COMPAT,EPP,ECP] parport0: irq 5 detected parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: Printer, Xerox DocuPrint matroxfb: Matrox Millennium II (PCI) detected matroxfb: MTRR's turned on matroxfb: 1024x768x32bpp (virtual: 1024x1024) matroxfb: framebuffer at 0xE4000000, mapped to 0xd0805000, size 4194304 Console: switching to colour frame buffer device 128x48 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured block: queued sectors max/low 169053kB/56351kB, 512 slots per queue loop: enabling 8 loop devices Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d 8139too Fast Ethernet driver 0.9.13 loaded eth0: RealTek RTL8139 Fast Ethernet at 0xd0c06000, 00:e0:7d:93:52:36, IRQ 19 eth0: Identified 8139 chip type 'RTL-8139C' [drm] Initialized tdfx 1.0.0 20000928 on minor 63 SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 9, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875 detected with Tekram NVRAM sym53c875-0: rev 0x3 on pci bus 0 device 9 function 0 irq 17 sym53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking sym53c875-0: on-chip RAM at 0xe9000000 sym53c875-0: restart (scsi reset). sym53c875-0: Downloading SCSI SCRIPTS. scsi0 : sym53c8xx - version 1.6b Vendor: COMPAQ Model: 4691SS Rev: T171 Type: Direct-Access ANSI SCSI revision: 02 Vendor: MICROP Model: 3391WS Rev: X501 Type: Direct-Access ANSI SCSI revision: 02 sym53c875-0-<0,0>: tagged command queue depth set to 4 sym53c875-0-<1,0>: tagged command queue depth set to 4 scsi1: WARNING: unusual hostadapter SCSI id 0; please verify! scsi1 : AM53/79C974 PCscsi driver rev. 0.5; host I/O address: 0xe000; irq: 16
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 sym53c875-0-<0,0>: wide msgout: 1-2-3-1. sym53c875-0-<0,0>: wide msgin: 1-2-3-1. sym53c875-0-<0,0>: wide: wide=1 chg=0. sym53c875-0-<0,0>: wide msgout: 1-2-3-1. sym53c875-0-<0,0>: wide msgin: 1-2-3-1. sym53c875-0-<0,0>: wide: wide=1 chg=0. sym53c875-0-<0,0>: sync msgout: 1-3-1-19-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15) SCSI device sda: 17773500 512-byte hdwr sectors (9100 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 sym53c875-0-<1,0>: wide msgout: 1-2-3-1. sym53c875-0-<1,0>: wide msgin: 1-2-3-1. sym53c875-0-<1,0>: wide: wide=1 chg=0. sym53c875-0-<1,0>: wide msgout: 1-2-3-1. sym53c875-0-<1,0>: wide msgin: 1-2-3-1. sym53c875-0-<1,0>: wide: wide=1 chg=0. sym53c875-0-<1,0>: sync msgout: 1-3-1-19-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15) SCSI device sdb: 17780058 512-byte hdwr sectors (9103 MB) /dev/scsi/host0/bus0/target1/lun0: p1 p2 Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 sb: Creative SB AWE32 PnP detected sb: ISAPnP reports 'Creative SB AWE32 PnP' at i/o 0x220, irq 5, dma 1, 5 sb: 1 Soundblaster PnP card(s) found. ISAPnP reports AWE32 WaveTable at i/o 0x620 <SoundBlaster EMU8000 (RAM512k)> NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 248k freed Adding Swap: 524280k swap-space (priority -1) reiserfs: checking transaction log (device 08:11) ... Using r5 hash to sort names ReiserFS version 3.6.25 eth0: Setting full-duplex based on MII #32 link partner ability of 41e1. sym53c875-0:0: ERROR (0:18) (1-21-4d) (f/3d) @ (script 820:11000000). sym53c875-0: script cmd = 11000000 sym53c875-0: regdump: da 10 c0 3d 47 0f 00 07 46 01 80 21 80 01 01 00 00 80 d1 0f 08 ff ff ff. sym53c875-0: restart (scsi reset). sym53c875-0: Downloading SCSI SCRIPTS. sym53c875-0-<0,0>: wide msgout: 1-2-3-1. sym53c875-0-<0,0>: wide msgin: 1-2-3-1. sym53c875-0-<0,0>: wide: wide=1 chg=0. sym53c875-0-<0,0>: wide msgout: 1-2-3-1. sym53c875-0-<0,0>: wide msgin: 1-2-3-1. sym53c875-0-<0,0>: wide: wide=1 chg=0. sym53c875-0-<0,0>: sync msgout: 1-3-1-19-10. sym53c875-0-<0,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<0,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15) sym53c875-0-<1,0>: wide msgout: 1-2-3-1. sym53c875-0-<1,0>: wide msgin: 1-2-3-1. sym53c875-0-<1,0>: wide: wide=1 chg=0. sym53c875-0-<1,0>: wide msgout: 1-2-3-1. sym53c875-0-<1,0>: wide msgin: 1-2-3-1. sym53c875-0-<1,0>: wide: wide=1 chg=0. sym53c875-0-<1,0>: sync msgout: 1-3-1-19-10. sym53c875-0-<1,0>: sync msg in: 1-3-1-19-f. sym53c875-0-<1,0>: sync: per=25 scntl3=0x30 scntl4=0x0 ofs=15 fak=0 chg=0. sym53c875-0-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
--sm4nu43k4a2Rpi4c-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/