It's a Pentium III 733 based system, with 256MB RAM (one stick, we have
already tried another stick), and every partition except swap on software
RAID 1. Both IDE disks (IBM-DTLA-307030, 30GB each) are connected to a HPT
ATA100 IDE controller (see the lscpi-output). I've attached some info, and
one decoded oops. Longer down you'll find info from lspci and the like.
As a side note, we have one other _identical_ hardware setup, running the
same kernel, same base software, same partitioning, same RAID setup, just as
a webserver. And it works grrrreat, no hickups whatsoever. Also, the oops's
seems to happen only with qmail-popup, at least thats how the few crashes I
had the chance to investigate did.
Output from ksymops (yes, it's ksymops-2.4.0):
--------------------
root@mail:~/ksymoops-2.4.0# ./ksymoops -m /boot/System.map < input
ksymoops 2.3.7 on i686 2.4.1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.1/ (default)
-m /boot/System.map (specified)
kernel BUG at page_alloc.c:203!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c012a6f2>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010292
eax: 00000020 ebx: c1419da8 ecx: cf343f00 edx: 00000008
esi: 00000002 edi: c0201558 ebp: 00000001 esp: c1863ef8
ds: 0018 es: 0018 ss: 0018
Process qmail-popup (pid: 6795, stackpage=c1863000)
Stack: c01d4145 c01d42d3 000000cb c0201558 c0201758 00000007 c1863fbc
c020158c
0000e706 0000e706 00000286 00000001 c0201558 c012a8bb c1862000
c1863f94
c1862000 c1863fbc 00000001 c1963840 00000007 00000000 c0201754
c012aad4
Call Trace: [<c012a8bb>] [<c012aad4>] [<c0114480>] [<c01077dc>] [<c0108dc3>]
Code: 0f 0b 83 c4 0c 90 89 d8 eb 14 45 83 c6 0c 83 fd 09 0f 86 db
>>EIP; c012a6f2 <rmqueue+232/258> <=====
Trace; c012a8bb <__alloc_pages+eb/2f0>
Trace; c012aad4 <__get_free_pages+14/20>
Trace; c0114480 <do_fork+94/6d0>
Trace; c01077dc <sys_fork+14/1c>
Trace; c0108dc3 <system_call+33/38>
Code; c012a6f2 <rmqueue+232/258>
00000000 <_EIP>:
Code; c012a6f2 <rmqueue+232/258> <=====
0: 0f 0b ud2a <=====
Code; c012a6f4 <rmqueue+234/258>
2: 83 c4 0c addl $0xc,%esp
Code; c012a6f7 <rmqueue+237/258>
5: 90 nop
Code; c012a6f8 <rmqueue+238/258>
6: 89 d8 movl %ebx,%eax
Code; c012a6fa <rmqueue+23a/258>
8: eb 14 jmp 1e <_EIP+0x1e> c012a710
<rmqueue+250/258>
Code; c012a6fc <rmqueue+23c/258>
a: 45 incl %ebp
Code; c012a6fd <rmqueue+23d/258>
b: 83 c6 0c addl $0xc,%esi
Code; c012a700 <rmqueue+240/258>
e: 83 fd 09 cmpl $0x9,%ebp
Code; c012a703 <rmqueue+243/258>
11: 0f 86 db 00 00 00 jbe f2 <_EIP+0xf2> c012a7e4
<__alloc_pages+14/2f0>
lspci:
------
root@mail:~/ksymoops-2.4.0# lspci -vvv
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d6000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:0f.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev
10)
Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at d9000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 03)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e800 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15)
(prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
RAID 1 setup (raidtab):
## /
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
chunk-size 32
nr-spare-disks 0
persistent-superblock 1
device /dev/hde1
raid-disk 0
device /dev/hdg1
raid-disk 1
## /usr/local
raiddev /dev/md1
raid-level 1
nr-raid-disks 2
chunk-size 32
nr-spare-disks 0
persistent-superblock 1
device /dev/hde6
raid-disk 0
device /dev/hdg6
raid-disk 1
## /tmp
raiddev /dev/md2
raid-level 1
nr-raid-disks 2
chunk-size 32
nr-spare-disks 0
persistent-superblock 1
device /dev/hde7
raid-disk 0
device /dev/hdg7
raid-disk 1
## /var
raiddev /dev/md3
raid-level 1
nr-raid-disks 2
chunk-size 32
nr-spare-disks 0
persistent-superblock 1
device /dev/hde8
raid-disk 0
device /dev/hdg8
raid-disk 1
## /home
raiddev /dev/md4
raid-level 1
nr-raid-disks 2
chunk-size 32
nr-spare-disks 0
persistent-superblock 1
device /dev/hde9
raid-disk 0
device /dev/hdg9
raid-disk 1
disk usage:
Filesystem Size Used Avail Use% Mounted on
/dev/md0 1.4G 711M 636M 53% /
/dev/md1 1.9G 50M 1.7G 3% /usr/local
/dev/md2 472M 15M 433M 3% /tmp
/dev/md3 961M 14M 898M 2% /var
/dev/md4 23G 1.2G 21G 6% /home
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/