Do I have some incorrect IDE parameters?
(using 2.4.0, not 2.4.1)
dual Pentium III 933 MHz (STL2 board)
SAMSUNG 20 GB IDE hard drive
ServerWorks chipset
details----------------------------------
Feb 2 19:34:51 localhost kernel: Linux version 2.4.0
(rdunlap@localhost.localdomain) (gcc version 2.95.3 19991030 (prerelease))
#34 SMP Tue Jan 30 17:49:24 PST 2001
Feb 2 19:35:00 localhost kernel: DMI table at 0x000EF5C0.
Feb 2 19:35:00 localhost kernel: BIOS Vendor: Intel Corporation
Feb 2 19:35:01 localhost kernel: BIOS Version:
STL20.86B.0016.P01.0010111108
Feb 2 19:35:01 localhost kernel: BIOS Release: 10/11/2000
Feb 2 19:35:01 localhost kernel: System Vendor: Intel.
Feb 2 19:35:01 localhost kernel: Product Name: STL2.
Feb 2 19:35:01 localhost kernel: Version .
Feb 2 19:35:01 localhost kernel: Serial Number .
Feb 2 19:35:01 localhost kernel: Board Vendor: Intel.
Feb 2 19:35:01 localhost kernel: Board Name: STL2.
Feb 2 19:35:01 localhost kernel: Board Version: 133-639718.
Feb 2 19:35:01 localhost kernel: Asset Tag: 0000000000000000.
Feb 2 19:35:01 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 6.31
Feb 2 19:35:02 localhost kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: IDE controller on PCI
bus 00 dev 79
Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: chipset revision 0
Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: not 100% native mode:
will probe irqs later
Feb 2 19:35:02 localhost kernel: hda: SAMSUNG SV2006D fc2_17, ATA DISK
drive
Feb 2 19:35:02 localhost kernel: hdb: TOSHIBA CD-ROM XM-6402B, ATAPI CDROM
drive
Feb 2 19:35:02 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 2 19:35:02 localhost kernel: hda: 40142592 sectors (20553 MB) w/480KiB
Cache, CHS=2498/255/63
Feb 2 19:35:02 localhost kernel: hdb: ATAPI 32X CD-ROM drive, 256kB Cache
Feb 2 19:35:02 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Feb 2 19:35:02 localhost kernel: Partition check:
Feb 2 19:35:02 localhost kernel: hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
/dev/hda:
Model=SAMSUNG SV2006D fc2_17, FwRev=LS100, SerialNo=V7**BT0521
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4
BuffType=DualPortCache, BuffSize=480kB, MaxMultSect=16, MultSect=off
CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=40142592
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 *mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3
udma4
/dev/hda:
I/O support = 0 (default 16-bit)
CPU0 CPU1
0: 15519 9063 IO-APIC-edge timer
1: 404 289 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
12: 0 0 IO-APIC-edge PS/2 Mouse
14: 21517 20366 IO-APIC-edge ide0
18: 138 121 IO-APIC-level eth0
NMI: 24511 24512
LOC: 24491 24492
ERR: 0
00:0f.1 IDE interface: Relience Computer: Unknown device 0211 (prog-if 8a
[Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at 5440 [size=16]
~Randy_________________________________________
________________________________________
Michael D. Black wrote:
Happens every night on both hda and hdc -- no sure yet what triggers it but
it is repeatable. Has happened since I've installed this machine with all
the 2.4.x series.
Jan 31 00:34:16 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:16 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:16 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:26 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:26 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:26 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:36 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:36 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:36 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:46 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:46 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:46 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:46 kernel: hdc: DMA disabled
Jan 31 00:34:46 i kernel: ide1: reset: success
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/