Once corrected everything is right in the world again.
Thanks to Mark Hahn for pointing out my mistake.
Todd
> -----Original Message-----
> My apologies in advance if I missed this in the archives (I found three
> or four threads discussing hangs at boot, but none related to 2.4.0 and
> the suggestions for older kernels that still applied to code in 2.4.0
> didn't change the symptoms).
>
> My kernel hangs after the "Ok, booting the kernel." message.
>
> This is on a machine with a DX440LX motherboard and only a single
> 300Mhz PII installed.
>
> I can boot 2.2.16 and 2.2.18 kernels successfully.
>
> I've tried paring down the config to a minimum (.config included below),
> but still have the problem. Specifically removing any SCSI since I
> had heard of problems with the AIC-78xx.
>
> Thanks for any ideas or insight,
>
> Todd Goodman
[SNIP of .config]
> Please read the FAQ at http://www.tux.org/lkml/>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/