Re: 2.4.0 and "LSR safety check engaged!\n"

[Mike Lieman]

Richard,

I think we're experiencing the same issue.  Could you fire up minicom 
(under 2.4) , connect to another box, and do a directory listing to see if 
you have the same lost characters/"flow control" looking issue I'm 
experiencing...  It's rock solid on 2.2.18.

peace
Mike

At 04:23 PM 1/10/01 -0500, you wrote:
>I get the subject message when trying to initiate a PPP connection over
>an internal USR 56k/flex modem defined as /dev/ttyS0.
>
>It happens with both diald and chat(from PPP).
>
>The "LSR safety check engaged!\n" message then causes this (diald):
>diald[407]: failed to get initial modem terminal attributes: Input/output 
>error
>diald[407]: could not get initial terminal attributes: Input/output error
>diald[407]: failed to set terminal attributes: Input/output error
>chat[803]: Can't get terminal parameters: Input/output error
>
>The serial support at boot is:
>Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT 
>SHARE_IRQ SERIAL_PCI enabled
>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>ttyS01 at 0x02f8 (irq = 3) is a 16550A
>
>Any clues ?  This is keeping me at 2.2.19prex for the nonce.
>
>Thanks,
>--
>Rick Nelson
>Life'll kill ya                         -- Warren Zevon
>Then you'll be dead                     -- Life'll kill ya
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to [e-mail]
>Please read the FAQ at http://www.tux.org/lkml/

-=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=--=*=-
Mike Lieman -- CIO                           [e-mail]
The Barry Scott Companies                      [phone] ext. 114