> Hi!
>
> For all of you who had problems getting the VIA IDE driver to work
> correctly on the 686b, here is a driver that should work with those
> chips, even in UDMA 100 mode. I've not tested it, because I don't have
> the 686b myself. So it may eat your filesystem as well.
>
> Good luck!
Oops - I did not look close enough. I have the 686a.
Well, it works the same :-)
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (cf/cg) IDE UDMA66 controller on pci0:4.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD450AA-00BAA0, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 9100, ATAPI CDROM drive
hdd: LS-120 VER5 00 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33)
hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
Timing tests are the same....
-- <SomeLamer> what's the difference between chattr and chmod? <SomeGuru> SomeLamer: man chattr > 1; man chmod > 2; diff -u 1 2 | less -- Seen on #linux on irc === Never ask a geek why, just nod your head and slowly back away.=== +==============================+====================================+ | John O'Donnell (Sr. Systems Engineer, Net Admin, Webmaster, etc.) | | Voice FX Corporation (a subsidiary of Student Advantage) | | One Plymouth Meeting | E-Mail: johnod@voicefx.com | | Suite 610 | www.voicefx.com | | Plymouth Meeting, PA 19462 | www.campusdirect.com | +==============================+====================================+- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/