LINUS:
> - enable DEBUG in arch/i386/kernel/pci-i386.h
> - do a "/sbin/lspci -xxvvv" on the interrupt routing chip (it's the
> "ISA bridge" chip - the VIA numbers are 82c586, 82c596, the PCI
> numbers for them are 1106:0586 and 1106:0596, I think)
> - do a cat /proc/pci
Okay, I've attached the following files:
dmesg -> dmesg output of Linux 2.4.0-ac4 (w/extra DEBUG info)
lspci -> output of /sbin/lspci -xxvvv (I'm just attaching the whole
output, in case I might have selected the wrong device.
If you still need something, just ask)
procpci -> output of cat /proc/pci
Does this help?
(Like my signature? It updates itself with the current Linux kernel
version I have installed. It's quite clever, just a 44 line Perl
script that tries to squeese a uname -a into that...)
-- +----------------------------------+-----------------------------------+ | Evan Thompson | POWERED BY: | | evaner@bigfoot.com | Linux cd168990-a 2.4.0-ac4 #1 Sun | | Freelance Computer Nerd | Jan 7 21:25:16 CST 2001 i686 | | http://evaner.penguinpowered.com | unknown (w/extra DEBUG info) | +----------------------------------+-----------------------------------+--ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg
Linux version 2.4.0-ac4 (root@cd168990-a) (gcc version 2.95.3 20001229 (prerelease)) #1 Sun Jan 7 21:25:16 CST 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000009f00000 @ 0000000000100000 (usable) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) On node 0 totalpages: 40960 zone(0): 4096 pages. zone(1): 36864 pages. zone(2): 0 pages. Kernel command line: mem=160M ide1=0x170,0x376,15 hdd=ide-scsi root=/dev/hdb5 ide_setup: ide1=0x170,0x376,15
ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 400.939 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 799.53 BogoMIPS Memory: 158904k/163840k available (1002k kernel code, 4548k reserved, 391k data, 200k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Covington) stepping 01 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: BIOS32 Service Directory structure at 0xc00fdb40 PCI: BIOS32 Service Directory entry at 0xfdb50 PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=01 PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: IDE base address fixup for 00:07.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 PCI: IRQ init PCI: Interrupt Routing Table found at 0xc00f85f0 00:07 slot=00 0:fe/4000 1:ff/8000 2:00/0000 3:04/deb8 00:08 slot=01 0:01/deb8 1:02/deb8 2:03/deb8 3:04/deb8 00:09 slot=02 0:02/deb8 1:03/deb8 2:04/deb8 3:01/deb8 00:0a slot=03 0:03/deb8 1:04/deb8 2:01/deb8 3:02/deb8 c3:00 slot=72 0:60/0e1e 1:1f/e852 2:93/8b00 3:fa/1f5a 0a:18 slot=05 0:74/3c27 1:f0/0c73 2:e8/feb9 3:0a/74c0 PCI: Scanning for ghost devices on bus 10 PCI: Discovered primary peer bus 0a [IRQ] PCI: Scanning for ghost devices on bus 195 PCI: Discovered primary peer bus c3 [IRQ] PCI: Using IRQ router VIA [1106/0586] at 00:07.0 PCI: IRQ fixup PCI: Allocating resources PCI: Resource e8000000-ebffffff (f=1208, d=0, p=0) PCI: Resource 000001f0-000001f7 (f=101, d=0, p=0) PCI: Resource 000003f6-000003f6 (f=105, d=0, p=0) PCI: Resource 00000170-00000177 (f=101, d=0, p=0) PCI: Resource 00000376-00000376 (f=105, d=0, p=0) PCI: Resource 0000ffa0-0000ffaf (f=101, d=0, p=0) PCI: Resource 0000df00-0000df1f (f=101, d=0, p=0) PCI: Resource 0000de80-0000de9f (f=101, d=0, p=0) PCI: Resource e7000000-e77fffff (f=1208, d=0, p=0) PCI: Resource efef0000-efefffff (f=200, d=0, p=0) PCI: Resource 0000cc80-0000ccff (f=101, d=0, p=0) PCI: Sorting device list... Activating ISA DMA hang workarounds. isapnp: Scanning for Pnp cards... isapnp: Calling quirk for 01:03 isapnp: CMI8330 quirk - fixing interrupts and dma isapnp: Card 'CMI8330/C3D Audio Adapter' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 DMI 2.0 present. 0 structures occupying 0 bytes. DMI table at 0x000F0000. Starting kswapd v1.8 parport0: PC-style at 0x378 [PCSPP(,...)] pty: 256 Unix98 ptys configured lp0: using parport0 (polling). lp0: console ready loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 IRQ for 00:07.1:0 -> PIRQ fe, mask 4000, excl 0000 -> newirq=14 -> hardcoded IRQ 14 PCI: Hardcoded IRQ 14 for device 00:07.1 VP_IDE: chipset revision 6 VP_IDE: VIA vt82c586b IDE UDMA33 controller on pci0:7.1 VP_IDE: 100% native mode on irq 14 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 83500 A8, ATA DISK drive hdb: Maxtor 92049U6, ATA DISK drive hdc: ATAPI CDROM, ATAPI CDROM drive hdd: ZIPCD 4x650, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 6856072 sectors (3510 MB) w/128KiB Cache, CHS=850/128/63, DMA hdb: 40026672 sectors (20494 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(33) hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p4 < p5 p6 > /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html IRQ for 00:09.0:0 -> PIRQ 02, mask deb8, excl 0000 -> newirq=10 -> got IRQ 10 PCI: Found IRQ 10 for device 00:09.0 eth0: RealTek RTL-8029 found at 0xde80, IRQ 10, 52:54:05:F2:1C:84. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IOMEGA Model: ZIPCD 4x650 Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 sb: CMI8330/C3D Audio Adapter detected sb: ISAPnP reports 'CMI8330/C3D Audio Adapter' at i/o 0x220, irq 5, dma 1, 5 sb: 1 Soundblaster PnP card(s) found. YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_tables: (c)2000 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 200k freed Adding Swap: 124952k swap-space (priority -1) Adding Swap: 40280k swap-space (priority -2)
-- snip of a bunch of UDP transfer errors. Not of importance --
* This appeared right at the end. After I made a print job, I believe...you might want to look into this as well:
spurious 8259A interrupt: IRQ7.
--ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 16 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00: 06 11 91 06 06 00 90 a2 01 00 00 06 00 10 00 00 10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: efe00000-efefffff Prefetchable memory behind bridge: e6c00000-e7cfffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00: 06 11 98 85 07 00 20 22 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 c0 c0 00 00 20: e0 ef e0 ef c0 e6 c0 e7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 41) Subsystem: VIA Technologies, Inc. MVP3 ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 86 05 87 00 00 02 41 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8f [Master SecP SecO PriP PriO]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at ffa0 [size=16] 00: 06 11 71 05 05 00 80 02 06 8f 01 01 00 20 00 00 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 20: a1 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0e 01 00 00
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at df00 [size=32] 00: 06 11 38 30 17 01 00 02 02 00 03 0c 08 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 df 00 00 00 00 00 00 00 00 00 00 25 09 34 12 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00
00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 06 11 40 30 00 00 80 02 10 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at de80 [size=32] 00: ec 10 29 80 03 00 00 02 00 00 00 02 00 00 00 00 10: 81 de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA]) Subsystem: Silicon Integrated Systems [SiS] SiS6326 GUI Accelerator Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min) Region 0: Memory at e7000000 (32-bit, prefetchable) [size=8M] Region 1: Memory at efef0000 (32-bit, non-prefetchable) [size=64K] Region 2: I/O ports at cc80 [size=128] Expansion ROM at efee0000 [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 1.0 Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00: 39 10 26 63 07 00 30 02 0b 00 00 03 00 40 00 00 10: 08 00 00 e7 00 00 ef ef 81 cc 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 10 26 63 30: 00 00 ee ef 40 00 00 00 00 00 00 00 00 00 02 00
--ikeVEW9yuYc//A+q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=procpci
PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 1). Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe8000000 [0xebffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0). Master Capable. No bursts. Min Gnt=8. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 65). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). IRQ 14. Master Capable. Latency=32. I/O at 0x1f0 [0x1f7]. I/O at 0x3f6 [0x3f6]. I/O at 0x170 [0x177]. I/O at 0x376 [0x376]. I/O at 0xffa0 [0xffaf]. Bus 0, device 7, function 2: USB Controller: VIA Technologies, Inc. UHCI USB (rev 2). IRQ 10. Master Capable. Latency=64. I/O at 0xdf00 [0xdf1f]. Bus 0, device 7, function 3: Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16). Bus 0, device 9, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0). IRQ 10. I/O at 0xde80 [0xde9f]. Bus 1, device 0, function 0: VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 11). Master Capable. Latency=64. Min Gnt=2. Prefetchable 32 bit memory at 0xe7000000 [0xe77fffff]. Non-prefetchable 32 bit memory at 0xefef0000 [0xefefffff]. I/O at 0xcc80 [0xccff].
--ikeVEW9yuYc//A+q-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/